Availability
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 114 )
$92.95
—
$113.95
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 122 )
$64.99
—
$89.99
Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.
( 13 )
$55.99
Hypertech PowerStay modules instantly and safely disable your vehicle's auto start-stop and/or cylinder deactivation V4 mode. The modules are simple plug-ins that put an end to these modes on your vehicle, once and for all, so you can enjoy your vehicle as it should be.
( 7 )
$109.72
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 68 )
$59.75
—
$65.85
MSD offers budget pricing and big performance with their Street Fire ignition controller modules. Their modules improve performance with multiple spark, more spark, and ensured combustion for a cleaner burn to set the streets on fire. MSD ignition modules will show you the benefits of greater throttle response, smoother idle, and full power output at high rpm. Fire your engine for less with MSD Street Fire ignition controller modules.
( 29 )
$65.75
Motorcraft ignition modules are designed to operate under a wide range of temperatures. They help to ensure that you will not be plagued with premature firing, misfiring, or shutdowns resulting from transient outside signals. They meet vehicle requirements for government fuel economy and emission standards.
( 6 )
$174.99
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 41 )
$69.77
—
$96.00
If your ignition module dies, you won't be going anywhere, and you have things to do and places to go. You can keep your distributor running smoothly with replacement ignition modules from Summit Racing™. These direct-replacement simple 3-wire hookups will have you out and about in no time. Make sure you're always ready with Summit Racing™ replacement ignition modules.
( 30 )
$78.99
—
$95.99
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 38 )
$50.99
—
$99.99
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$96.03
—
$106.05
MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.
( 8 )
$52.69
MSD retard modules are designed for use with MSD timing controls with retard features. They are available in several degree ranges to custom-tailor your ignition.
( 6 )
$59.25
—
$65.89
Summit Bucks
ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.
( 5 )
$61.99
—
$101.99
With Delphi's knowledge of OEM protocol, their ignition control modules are engineered using superior materials to improve your vehicle's performance with the benefits of greater throttle response, smoother idle, and full power output at high rpm. Delphi ignition control modules are quality, direct fit OEM replacements available for a range of applications. For improved ignition performance, spark it up with Delphi!
( 15 )
$61.99
—
$104.99
MSD Circle Track ignition control modules will replace your stock 4-pin with the same powerful and reliable performance. These replacements are for use with MSD HEI distributors and will spark the energy to keep you going lap after lap. Make your Circle Track car's ignition "bulletproof" with control modules from MSD.
( 1 )
$86.99
Keep your MSD distributor operating correctly with one of these MSD replacement distributor modules. They are available for a variety of distributors and are designed to install easily with no modifications. Make sure that your spark stays strong with one of these MSD replacement distributor modules.
( 5 )
$99.95
SQR Performance is setting a new standard in performance automotive parts with modern design and manufacturing processes that exceed expectations, and provide quality upgrade components you can count on. SQR Performance HEI ignition modules provide high coil output with solid state electronics for superior reliability. Designed to protect against overheating, they are compatible with most factory and aftermarket HEI distributors that use a 4-pin ignition module. SQR modules include a heat-dissipating compound for installation. Choose one for your project.
Not Yet Reviewed
$54.99
Ignition modules can eventually deteriorate and break down. Crown Automotive ignition modules will allow your car to once again ignite the fuel that allows your car to start and keep going. If you're experiencing power loss, overheating, or stalling due to failure, Crown parts are direct-fit components to discharge the spark that keeps you going.
( 2 )
$62.99
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$99.95
—
$112.95
All 2018+ FCA (Stellantis) vehicles are built with a Security Gateway Module (SGW) that prevents access to the vehicle from the OBD2 port by anything other than the dealer diagnostic tools. Simply locate and unplug the SGW module, and plug the SGW Bypass block in its place. The OBD2 port will then have full access for use by aftermarket devices such as Z Automotive's Tazer or BurnBox, tuning tools, and code readers. These modules are required for use in 2018 and up Grand Cherokees and Durangos.
Not Yet Reviewed
$69.00
Sierra Marine offers ignition modules for a variety of watercraft distributor applications. These are OEM direct-fit replacements, so match up the part number needed for your powersports equipment.
( 1 )
$92.99
Moroso ignition control modules provide high-output consistent dwell, accurate timing, extended durability, and high spark output. Whether you're looking for OEM replacement or high performance gear, Moroso has you covered.
Not Yet Reviewed
$80.99
If your points eliminator module happens to burn out, or you're performing maintenance to your system, be sure to have the right parts for the job--ACCEL points eliminator replacement models. These modules are direct replacements for those in your ACCEL points eliminator kit.
( 15 )
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
