Availability
Showing In Stock Items. Show All 45 Items.
Our Summit Racing™ battery cables are great for installing a battery in your trunk for better weight transfer or a cleaner engine compartment. The cable kits comes with battery cables and hardware.
( 86 )
$65.99
QuickCar Racing Products offers quick-connect battery charging cables in 24 in. or 36 in. lengths. They quickly connect and disconnect, eliminating the need for hood or deck lid removal. Each kit includes necessary connectors, terminals and dust cover. * Includes an 8-gauge red and black cable, necessary connectors and terminals, and a dust cover, enabling you to mount the connector on the exterior of a vehicle * The kit provides a remote access point for charging, eliminating the need to access the battery directly * The cables are made of copper
Not Yet Reviewed
$53.95
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$79.05
—
$82.79
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
Painless Performance LS ignition coil wiring harness extensions get your coils off of the valve covers. With factory color-coded wires and weatherproof connectors, these harnesses make your job easier to accomplish. They're available in 2, 3, or 4 ft. pigtail lengths. Move your coils with Painless Performance LS coil extension harnesses.
( 1 )
$89.99
Lowdoller Motorsports intake air temperature sensor thermocouples measure the temperature of air entering an engine to provide data to the Engine Control Unit (ECU), which uses the information to optimize air-fuel mixtures, ignition timing, and overall engine performance. This real-time data can help prevent engine damage by preventing issues like pre-ignition and knocking, ensuring improved fuel efficiency, reduced emissions, and smoother operation. Compared to standard thermistor IAT sensors, Lowdoller air intake temperature sensor thermocouples offer greater accuracy and a faster time response for their specific application, while also freeing up an ECU's analog input for other uses, though they do require a specialized amplifier and wiring, which are sold separately.
Not Yet Reviewed
$99.50
Lowdoller Motorsports cylinder head temperature sensor thermocouples are designed for faster temperature readings and improved accuracy, which is crucial for engine control systems to adjust fuel and ignition timing effectively. They feature an enhanced construction with heavy-duty ring and a K-type mini plug with metal strain relief to withstand the high vibrations and extreme temperatures of an engine bay. By providing accurate real-time readings, these CHT sensor thermocouples offer improved engine protection against overheating and potential damage, protecting critical components.
Not Yet Reviewed
$87.50
Avoid conductivity issues that can cause your engine to run poorly and be difficult to diagnose. ICT Billet MAF/IAT breakout harnesses are assembled with OEM tooling and use OEM harness wire colors, as well as OEM Delphi connector, lock, seals, and terminals. ICT Billet MAF/IAT harnesses are offer in different styles for retaining MAF in factory position while breaking (relocating) IAT sensor to different location, converting small 3-wire MAF to larger 5-wire MAF/IAT sensor, or when you need more length when relocating intake/air filter to opposite side of engine from factory harness and IAT is relocated external to the MAF sensor. Choose the one that meets your "breaking" needs.
Not Yet Reviewed
$65.99
Increase your miles per gallon by up to 15 percent with a set of these Granatelli Motor Sports MPG Plus spark plug wires. They feature zero Ohms per foot of resistance and a solid stainless steel inner core for maximum conductivity. The wires provide faster engine startup and a smoother running engine, as well as increased horsepower and torque. Go green and install a set of Granatelli Motor Sports MPG Plus spark plug wires on your daily driver or high performance vehicle.
( 13 )
$65.84
—
$111.72
These American Autowire battery disconnect switches are made of high-quality materials. They have a voltage compatibility of 6 to 36 V and operate off of manual activation switches. Find the battery disconnect switches that suit your needs at American Autowire.
( 23 )
$50.35
—
$56.05
Don't allow your ignition switch to power your electric fuel pump. These Ron Francis Wiring fuel pump relay kits ensure that your fuel pump is receiving full voltage from the battery. These fuel pump relay kits also come with a 30 amp fuse and relay, terminal ends, and all necessary wiring to ensure that your installation goes smoothly. These Ron Francis Wiring fuel pump relay kits will keep your fuel pump working to its full potential and feeding whatever beast you have under the hood.
( 19 )
$64.63
Longacre battery disconnect switches are available in a variety of styles, from economy to weatherproof and more. They are required by many sanctioning bodies. Order the model that best suits your application.
( 31 )
$54.99
—
$103.99
Simplify the wiring system in your race car. Ron Francis Wiring fuse panel drop down brackets allow you better access to your fuse panel. With these brackets, the panel can be unhooked and dropped down. Such a design is quite useful in race cars, where the panel is often mounted below the dash or other tight quarters.
Not Yet Reviewed
$97.95
Standard Motor offers over 40 steering angle sensors that show the rate of turn, wheel angle, and other data for a high-quality direct-fit replacement. Designed to deliver trouble-free, consistent performance, all steering angle sensors are made from high-quality materials for ultimate durability and are manufactured to meet or exceed strict quality requirements. Select the Standard Motor steering angle sensor recommended for your application.
Not Yet Reviewed
$99.99
Ron Francis Wiring Synergy Series ignition and dimmer switches include the Series IS-07 ignition switch, as well as the DS-02 floor dimmer switch, and include a door jamb switch. They are made of high-quality materials to ensure dependability for years to come. If you're in need of any switches in your ride, Ron Francis Wiring has you covered.
( 1 )
$53.85
On Sale
Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!
( 18 )
$112.45
$101.20
Summit Bucks
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 323 )
$105.99
Nitrous Outlet switch panels are designed to give you a clean look—and make using multiple nitrous-related options easier to manage with the use of large, easy-to-reach switches. These panels are constructed of water jet-cut aluminum and have a black anodized finish and a custom fit. They'll work with any brand of nitrous system and accessories, and with no drilling needed, will mount to your cup holder, ashtray, or console, depending on the application.
( 17 )
$112.99
FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 4 )
$67.95
Standard Motor Products offers these fuel pump cut-off switches for a variety of applications. These switches allow you to easily shut off your fuel pump with the push of a button.
( 10 )
$62.99
On Sale
These sets of 8mm 100 percent pure silicone insulation (designed to withstand over 600 degrees F) with a fiberglass-reinforced jacket and double spring locking spark plug terminals provide a firm grip on plugs. They're offered in two styles--a popular resistor core, which has 40 percent less resistance (and more firepower) than most resistor conductors, and a tinned copper weld wire core, which is for racing applications and where RFI is not a concern.
( 99 )
$95.45
$85.90
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1016 )
$52.99
—
$53.99
DIYAutoTune hall effect sensors can be used as crankshaft or camshaft position sensors, and are also suitable for use as vehicle speed sensors (VSS). The threaded bodies feature a red anodized finish and includes two M12 mounting nuts. They run off 5 to 24 V and gives a nice square wave, so there's no variable voltage issues. Specifications are: * Operating voltage: 5 to 24 V * Maximum over-voltage and reverse voltage: +30 to -24 V * Maximum supply current required: 6 mA * Maximum output current sinking: 20 mA * Output type: Open collector * Triggering options: Magnet or ferrous metal * Maximum frequency: 15 kHz * Temperature range: -40 to +125 degrees C * Nominal air gap: 1.5mm * Thread pitch: M12 x 1mm * Overall length: 65.5mm, not including wires * Sensor material: Aluminum * Sensor orientation: Not directional * Recommended tooth size is a rectangle measuring at least 2.5mm x 6.35mm, with a 5.0mm tooth height.
( 3 )
$102.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
