Availability
Showing In Stock Items. Show All 39 Items.
MSD distributor cap bolt down kits will securely hold your cap in place. Under racing conditions and severe vibrations, the cap can move with the spring clips, but these bolt-down-style clips will prevent any movement!
( 1 )
$79.05
Add a touch of class to your coil bracket installation with ARP ignition coil bracket fasteners. They are available in black oxide finished chromoly or rustproof stainless steel, as well as with a conventional hex head or 12-point. These fasteners are great for tight, hard-to-reach ignition coils.
( 16 )
$55.99
—
$82.99
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$72.69
$55.35
—
$99.95
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
$70.35
—
$78.55
On Sale
MSD Blaster TFI coils powers up your Ford ignition system. With windings and construction similar to MSD's Blaster 2 coils, these coils have an increased turns ratio, plus lower primary resistance than your stock coil. MSD Blaster TFI coils will work with stock TFI ignition systems as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your Ford ignition system? Just bolt in one of these MSD Blaster TFI coils.
( 144 )
$78.15
$70.35
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$127.95
—
$131.95
$92.59
Drag Race Solutions ignition coil mounting brackets feature CNC billet aluminum construction available with a satin black powdercoat or triple chrome plate finish. They come with stainless steel mounting bolts and aluminum spacers to mount brackets directly to a Big Block Chevy cylinder head. Drag Race Solutions ignition coil mounting brackets fit MSD Pro Power, HVC, and HVC II coils.
Not Yet Reviewed
$99.99
Relocate your coil pack to a more open or out of the way area of the engine bay with Summit Racing™ remote mount LS ignition coil relocation brackets. Our kits include bolts and spacers, along with robust powdercoated steel brackets to securely mount your coil packs with a clean, professional look.
Not Yet Reviewed
$69.99
On Sale
MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection
Not Yet Reviewed
$101.95
—
$112.95
$76.95
—
$101.65
On Sale
MSD Pro-Caps are larger than standard caps, to handle more voltage. Each terminal is spaced exactly 2 in. apart to deliver spark to the right plugs with less spark scatter. The caps are molded from DuPont Rynite for maximum strength, and the rotors feature thick vanes, deep skirts, and a dual screw-down rotor tip for long life. The Pro-Cap bases bolt on to most MSD distributors.
( 4 )
$99.95
—
$112.95
$89.95
—
$101.65
Allstar Performance deluxe aluminum distributor hold-downs fit most aftermarket distributors and magnetos. An Allen head bolt prevents the distributor from turning in the clamp, so the distributor can be removed and reinstalled without resetting the timing. These hold-downs fit all Chevy V8 applications except 348-409; will not fit Mallory magnetos.
( 1 )
$52.99
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM
( 24 )
$86.95
—
$102.95
On Sale
FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.
( 1 )
$69.00
—
$75.00
$58.65
—
$63.75
Chevrolet Performance ignition coil packs feature advanced bobbin technology, a specialized magnetic steel core, and optimum windings. This results in higher energy and voltage outputs plus arc duration. Installation is easy, too--they're direct bolt/plug-in units. Keep your engine operating efficiently with Chevrolet Performance ignition coil packs.
Not Yet Reviewed
$100.99
Granatelli Motor Sports Street Fighter coil packs offer true high performance featuring advanced bobbin technology, a specialized magnetic steel core, and optimum windings. These features result in higher energy and voltage outputs, plus arc duration. Installation is easy, too--they're direct bolt/plug-in units.
( 25 )
$52.37
ACCEL has been a staple in the motorcycle ignition market for years, and their Super Coils are one of the best performance values that you can bolt on your motorcycle or ATV to achieve smoother idling, crisper throttle response, and quick ACCELeration! ACCEL Motorcycle Super Coils allow faster rise time, higher voltage output, and maximum spark energy to the plugs. They easily install in the OEM location and are able to accept stock coil covers, where applicable.
Not Yet Reviewed
$169.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 625 )
$123.95
$53.35
—
$99.95
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
On Sale
ACCEL Ford EEC-IV Super Coils offer increased throttle response, idle quality, and starting. Their E-core design maximizes energy and voltage output. ACCEL Ford EEC-IV Super Coils are direct bolt-in and plug-in replacements for use with computerized ignitions and Ford TFI distributors. They'll get you the spark you need and the performance you want.
( 25 )
$84.85
$63.64
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
—
$86.95
$65.08
—
$78.25
On Sale
Tune-up your Ford 7.3L Godzilla with MSD's direct-replacement coils. MSD is the ignition leader for performance parts that stay within your budget. These coils are available in black or red, individually or in a set of eight. Additional details: * Direct bolt-on to factory valve covers * Improved high-RPM operation * Patented winding design and materials * Direct plug-in to factory connectors
( 2 )
$63.25
$56.95
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$99.95
$54.97
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components--especially when they improve performance like these MSD direct replacement ignition coil packs. They are designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and improved midrange rpm power.
( 60 )
$99.95
—
$104.95
$54.97
—
$57.72
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
