Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
23 Results Found For "COMP"
Showing In Stock Items. Show All 30 Items.
Big Gun Exhaust TFI Power Boxes
Tuning made easy--Big Gun Exhaust TFI Power Boxes are easy to install and easy to adjust for increased horsepower and throttle response. In minutes, you can increase the performance of your powersports machine--without a computer or a dyno. The Gen 3 technology allows for plug-and-play installation, while the integrated faceplate buttons provide easy adjustment. Plus, the hardware components are water-resistant. Simple connections and simple to use; Big Gun Exhaust TFI Power Boxes offer push-button performance.
Not Yet Reviewed
$357.99
JMS Chip BoostMAX Performance Boosters
Give your EcoBoost a ... well, boost with JMS Chip BoostMAX! These complete performance solutions plug-and-play inline using your vehicle's factory wiring connectors and harnesses to provide a huge increase in power and torque from low-end through top-end. BoostMAX units are designed to capitalize on your engine's technology through digital electronics and OEM sensors that control spark, timing, and fuel—and they're easy to install and remove. Units are housed in a proprietary sealed enclosure with wiring harness, and include the OEM connectors, a remote boost control knob, installation kit, and instructions. Order the model recommended for your vehicle. Add pep, increase power and improve fuel performance with JMS Chip BoostMAX performance boosters—a simple upgrade that can't be beat!
( 8 )
$329.75
XS Power AGM Batteries
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 283 )
$259.99
—
$489.99
Summit Racing™ Ready-to-Run Billet Distributors
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 30 )
$264.99
—
$359.99
BluePrint Engines Pro Billet Ready to Run Distributors
BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
( 5 )
$299.99
Powermaster Street Alternators
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1821 )
$250.99
—
$478.99
Powermaster XS Volt Alternators
Powermaster XS Volt alternators feature a powerful internal regulating system for all performance-based applications. They're great for drag, Circle Track, and stereo competitions. The alternators work well for voltage sensitive ignition systems and lithium battery applications. Dozens of models and options are available. Select the alternator recommended for your vehicle. Features include: * Digital control--response time in milliseconds, compared to seconds for analog regulators * Adjustable voltage--adjustable between 13.5 and 18.5 volts; great for 12 V or 16 V systems * Powerful, reliable internals--short circuit protection and loss of ground protection in a sealed, vibration-resistant housing * One-wire operation--easy to connect, turns on and off with the engine
( 47 )
$254.99
—
$483.99
On Sale
Summit Racing™ Billet Distributors
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 166 )
$250.99
—
$304.99
On Sale
MSD Circle Track HEI Distributors
MSD Circle Track HEI distributors were designed with the demands of racing in mind. These "stock appearing" units are peaked and tuned to provide ultimate reliability and strength to run circles around the competition. The bulletproof ignition module fires a high-output coil in the cap, while a specially designed, QPQ-coated chromoly advance cam and weight set ride on TIG-welded weight plate pins and a TIG-welded distributor shaft. This combination provides brute strength and precision timing from idle to maximum rpm. At the bottom, a QPQ-coated steel gear will run lap after lap, race after race, victory after victory without fatigue.
( 2 )
$449.95
$403.95
Summit Racing™ Computer-Controlled Billet Distributors
Our Summit Racing™ computer-controlled billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance.
( 92 )
$255.99
On Sale
MSD Dynaforce Alternators
Whether you need a high output alternator for your musclecar, street rod, or touring machine, MSD Dynaforce alternators have you covered. They are designed for maximum output from idle to high rpm. They feature a stator and rotor that are electrically balanced for optimum performance and their charge post is moved to the side of the housing to allow for improved clearance to the block. A pulley baffle is also included to ensure that there are never any fan-to-belt issues. MSD Dynaforce alternators are available in 50, 120 and 160 amp outputs and feature one-wire installation to keep things clean, easy, and effective. When it comes to equipping your ride with a high-quality alternator, MSD Dynaforce alternators bury their competition.
( 6 )
$538.95
$484.95
Powermaster Street Series Alternators
Powermaster Street Series alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, muscle car, sport compact, or audio competition vehicle, Powermaster gives you the power needed to get it started and keep it going. These race-inspired alternators offer great output to weight ratio. Here are more product details: For most people, the only alternator rating they're familiar with is the amperage rating. Alternators are spoken of as a 65 amp or 100 amp alternator. When replacing the alternator on the family car, this is probably the only information that's necessary. After all, all one needs is an alternator that matches the original. When building a custom car from the ground up, however, a deeper understanding of the power curve of an alternator is required. Usually a custom pulley or so-called "power pulley" set is used with a performance alternator. A mismatched pulley ratio and alternator will spell trouble, especially at idle speeds where alternator performance is critical. To avoid this, it's important to understand the alternator's capability at slow speeds. An alternator's output is dependent on speed, but this can be deceiving because this output is not linear. Instead, it follows a curve. Each alternator has a unique curve, and at idle small changes in the alternator's speed can make a big difference in its output capacity. Because of the preceding, pulley ratios are very important, especially when using high amperage alternators. The pulley that are supplied with the alternator are matched to the winding and power curve. It's important that any dress-up pulley sets do not deviate from this ratio. Typically, a street driven car should have a pulley ratio of at least 3:1. If the vehicle has an automatic transmission with a low idle and the vehicle spends a lot of time cruising, then a higher pulley ratio—perhaps 3.5:1—should be used. Alternators can take high speeds up to 20,000 rpm for short periods, so overdriving the unit is not a problem. The output of high amp alternators can drop off substantially under 2,400 rotor RPMs. Therefore, Powermaster does not recommend power pulleys with high amp alternators. Powermaster uses a state-of-the-art computer alternator dyno to measure the performance of each alternator they manufacture. Output curves, engine idle speeds, and alternator pulley ratios are carefully considered to assure good drivability at idle and slow cruising speeds.
Not Yet Reviewed
$308.99
On Sale
Holley Ford Modular Ignition Coil Harnesses
Holley products deliver the edge you need over the competition. Their Ford modular ignition coil harnesses offer true plug-and-play performance by using OE-style connectors to hook up to your factory coil packs, sensors, or control unit without any modifications. Among other functions, fully connected ECUs allow you to precisely regulate the fuel and ignition of your engine. These Holley complete harnesses enable applications with a single power adder to accommodate a greater number of controls. Order the model designed for your vehicle/engine.
( 1 )
$255.95
Edelbrock Supercharged Coil Covers
Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.
Not Yet Reviewed
$447.95
—
$491.95
On Sale
XDR Off-Road Delta Boost Tuner Modules
The XDR Off-Road Delta Boost tuner modules are a simple way to gain up to four psi in boost pressure with an easy to install plug-and-play unit—which results in horsepower and torque gains throughout the useable rpm range to accelerate you past the competition. The modules simply install in-line with the boost sensor in the factory harness and is controlled by a downloadable Bluetooth app for both IOS and Android platforms. The app shows you real-time boost pressures and offers four different power settings; Valet mode, which is great when handing off the keys to a less experienced driver, Standard mode is the equivalent to stock boost setting, Sport mode gains up to three psi over the stock boost and Maximum mode gives you an added four psi over stock boost—so you can shred the trail. Modules are fully sealed from moisture and dirt and comes with rubber weatherproof capsule. Detailed installation instructions and apps are downloadable for a quick and easy installation.
Not Yet Reviewed
$549.95
$310.11
Biondo Overthrow Trans-Brake Buttons
Biondo's overthrow trans-brake buttons offer several benefits for drag racers, primarily focused on improving consistency and adjustability of reaction times. Beneficial features include a longer stroke for more precise adjustments, a custom concave button head, and the use of a constant force spring with linear roller bearings for smooth and reliable operation. Biondo Racing's overthrow trans-brake buttons come with shims that allow for quick and easy adjustments to reaction time, allowing racers to fine-tune their launch to hundredths of a second. These buttons are NHRA approved for use in competition, meeting their length and adjustability requirements.
Not Yet Reviewed
$289.99
—
$311.99
Antigravity Batteries Re-Start Batteries
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$449.99
BikeMaster Lithium-Ion 2.0 Batteries
BikeMaster Lithium-Ion 2.0 batteries deliver a heavyweight punch in a featherweight package. By combining the latest in lithium iron phosphate (LiFeP04) cell technology and an onboard cell management system, these Lithium-Ion 2.0 batteries provide unprecedented power and safety. Full function internal BMS (Battery Management System) provides individual cell voltage protection and cell balancing function. LiFePO4 cells provide power and safety in a non-combustible cell. These batteries are up to 70 percent lighter compared to lead-acid battery—and offer quicker recharge with 10A current and 90 percent charged within 6 minutes. In addition, their Eco-friendly design does not contain any acid and heavy metals such as lead, cadmium, or hydrargyrum (mercury).
( 2 )
$304.99
Odyssey Extreme Batteries
These Odyssey Extreme batteries are built to withstand the constant pounding, extreme heat, high revving, and high vibration of performance racing engines. They feature rugged construction and are packed tightly with pure lead plates. Their non-spillable AGM design helps to protect against the shock and vibration that can quickly destroy normal batteries. The pure lead plates mean more power--twice the overall power and three times the life span of conventional batteries. Odyssey Extreme batteries are ideal for a complete range of racing applications, including automobiles, motorcycles, ATVs, snowmobiles, and racing boats.
( 8 )
$448.99
Interstate MTX Automotive Batteries
Interstate MTX automotive batteries deliver ideal life and power for both starting and accessories. They are designed to replace original-equipment AGM's and provide the additional power required for performance vehicles and those with a high number of accessories or plug-ins.
( 1 )
$287.99
—
$312.99
PerTronix Flame-Thrower Plug and Play Billet Distributors with Ignitor II® Module
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 363 )
$431.25
—
$433.40
PerTronix Flame-Thrower Stock Look Cast Distributors
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 259 )
$318.80
—
$383.00
PerTronix Flame-Thrower Type 1 Engine Distributors
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$433.40
