Availability
Showing In Stock Items. Show All 29 Items.
Meziere True Start 200 Series high-torque starters are designed to fit into tight areas. They provide adequate torque and spin speed for most Pontiac engines with moderate compression ratios, using Meziere's robust drive and custom planetary gear reduction. To alleviate starter failure, standard testing includes amp draw, power and rotational speed under load, as well as free rev-testing to ensure proper balance of internal rotating parts. These True Start starters will do well on any normally aspirated engine up to 420 cu. in. with compression ratio up to 12:1. In fact, they're recommended for nearly 600 applications from the 1960s, '70s, and '80s. Additional details: * Fits traditional Pontiac with 166-tooth flexplate * Proprietary Meziere drive ensures reliability * Slim inline design clears narrow frame rails and headers * Convenient clocking in 15 degree increments * Two high-strength precision starter bolts with washers and shim included
( 2 )
$512.76
These Meziere True Start 100 series high-torque starters are recommended for all high-compression and supercharged applications. They use an optimized gear reduction to provide maximum engine cranking speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. The massive 9310 heat-treated, lock-up sprag and large rollers provide the strongest possible clutch mechanism in the industry. Meziere True Start 100 Series high-torque starters feature an offset designs to clear most kickout-style oil pans.
( 3 )
$434.88
CSR Platinum Pro series high-torque starters are designed for all-out competition use. They are recommended for all engines over 450 cu. in. and/or with compression ratios over 12.5:1, as well as all supercharged engines. Platinum Pro series starters have a powerful 2.4 hp motor that provides 40 percent more torque than CSR's 1.6 hp high-torque starters, and they're only one inch longer, to allow for maximum clearance.
( 4 )
$399.95
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 599 )
$315.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 894 )
$294.99
—
$345.99
Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.
( 33 )
$467.50
Tuff Stuff Performance stock starters exceed OEM specifications for maximum performance. These full-size aluminum cast stock starters provide the torque necessary in several applications. The stock starters are available in triple chrome plated, natural, and powdercoat finishes—and they're assembled in-house in the USA. Tuff Stuff's diligent quality control ensures consistent, reliable high performance parts, so you know their "chrome will get you home"! Dozens of models are available; choose the starter designed for your vehicle.
( 188 )
$279.99
—
$395.99
CVR Protorque Maximum starters with 3.1 hp and a 4.44:1 gear reduction ratio are sure to get your engine cranking with ease. They feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. Protorque Maximum starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 22 )
$282.99
—
$293.99
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 234 )
$292.99
—
$303.99
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$449.95
Powermaster Ultra Torque high-speed starters deliver 25 percent more cranking rpm at the flywheel than the standard Ultra Torque starters. They are perfect for use in blown alcohol engines, or any engine requiring higher than normal cranking speed. The Powermaster Ultra Torque high-speed starters feature a 2.2 kW, 3.0 hp motor and have a machined aluminum adjustable mounting block. They will fit all oversized and kickout-style oil pans with no clearance problems.
( 29 )
$329.99
—
$355.99
TCI Extreme Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance as well. TCI Extreme Racing starters are built with full ball bearings for less friction and more torque, a heavy-duty contact disc solenoid for more consistent starts, and a high-temperature, epoxy-encapsulated armature to resist heat and vibration. Their efficient design draws less amperage, leaving more power for your ignition system to keep you in the race.
( 2 )
$355.95
—
$509.95
TCI Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance. TCI Racing starters are built with full ball bearings for less friction and more torque and a heavy-duty contact disc solenoid for more consistent starts. Their efficient design draws less amperage, leaving more power for your ignition system.
( 9 )
$344.95
High torque starters from TCI should be your pick for tow truck and street performance applications. These starters are OEM remanufactured with four fields of windings with high-temperature solenoids and will produce 20 percent more cranking power than stock to keep you moving. The high torque starters are resistant to heat produced by performance exhaust headers and will take repetitive cranking without failure. TCI high torque starters offer great power at a small price.
( 28 )
$279.95
Tuff Stuff Performance gear reduction starters draw half the amperage of full size starters—for more spark to get you going at only a fraction of the size and weight. These smaller lightweight babies can crank out the power you desire and need for the street, strip, or track, while affording you valuable space for more header, chassis, and oil pan clearance. The gear reduction starters with multi-indexing mounting bases are available in triple chrome plated, natural, or black powdercoated finishes; they're assembled and finished in-house. Tuff Stuff Performance understands that you need more than a custom finish. Their diligent quality control ensures consistent, reliable high performance parts, so you know that their "chrome will get you home"! Dozens of models are available for both automatic and manual transmissions. Choose the style and starter designed for your vehicle application.
( 249 )
$251.99
CSR Mini High Torque starters offer the ultimate in high-torque, gear-reduction competition starters. They have been race-proven on large cubic inch racing engines, as well as herds of street cars. They're designed to meet the most rigorous demands of today's competition engines and still keep on cranking out the starts.
( 1 )
$349.95
On Sale
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 12 )
$749.95
$412.95
CVR Protorque Ultra starters live up to their name by delivering 250+ lb.-ft. of torque. They feature a specially wound field coil and armature to deliver that torque throughout the cranking range. The machined aluminum adjustable mounting block works with most oversized kickout oil pans, and are great for big cubic inch engines. The starters use a 2.5 kW, 3.4 hp motor that'll support up to 18:1 compression ratio.
( 15 )
$262.99
—
$299.99
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 185 )
$257.99
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 196 )
$279.99
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 53 )
$267.99
Tilton Engineering offers a range of clutch cover-mounted ring gears that are designed to be direct replacements for Tilton clutch assemblies. Optimized using finite element analysis (FEA), these ring gears are engineered for long life while maintaining a low weight and inertia. Tilton ring gears feature a stronger tooth profile and superior metallurgy that resists shearing. Order the Tilton clutch cover-mount ring gear recommended to fit your application.
Not Yet Reviewed
$327.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
