Availability
Showing In Stock Items. Show All 153 Items.
Holley EFI O2 sensors precisely manage air fuel ratios to keep your engine performing at its peak. Available in Bosch LSU4 and NTK wideband configurations, Holley EFI has the correct sensor for your high performance EFI application.
( 35 )
$359.95
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$349.95
—
$435.95
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 238 )
$322.46
HalTech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
MSD Power Grid wide band oxygen sensor modules provide valuable air/fuel ratio data to your MSD Power Grid, data logger, or air/fuel ratio gauge. These modules feature: * Plug-and-play with MSD Power Grid * Easy set-up; no free-air calibration required * Completely sealed unit for durability in race environments * Bosch 4.9 oxygen sensor * 0 to 5 V output to run an air/fuel gauge or data logger * Dual-color LED provides on board diagnostics * Multiple modules can be used on a single Power Grid * Data logs air/fuel ratio and heater voltage * Fuel calibration options for gasoline, methanol, ethanol, E85, propane, and diesel * Custom fuel calibration option can be programmed by user
( 2 )
$334.95
ACDelco GM Genuine Parts nitrogen oxide sensors detect the NOx content of exhaust gas from diesel engines, and are factory-recommended replacements. The information from these sensors is used by the engine control module (ECM) to adjust various parameters and reduce harmful emissions. These OE sensors are manufactured to fit specific applications, providing the same performance, durability, and service life you expect from General Motors.
( 9 )
$254.99
—
$324.99
Get add-on performance for your Ford with SCT Big Air 2600 cfm mass air meters. They're great for your modified and custom-tuned applications where the stock mass air meter "pegs" due to increased airflow. SCT Big Air meters feature OEM-quality calibration for factory level drivability, repeated accuracy, and reliability. These aluminum 90mm mass air meters can handle much more power than your wimpy stock unit. For more air and more power, go with Big Air 2600 cfm mass air meters from SCT Performance.
( 1 )
$299.00
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 36 )
$255.99
—
$490.99
Lingenfelter Performance Engineering mass airflow sensors are large-diameter and low-restriction. These assemblies will provide accurate airflow--even at high power levels. Recommended for supercharged, turbocharged, and other high output engine applications, these 100mm tube MAFs are precision CNC-machined from aluminum, and then anodized black for durability and appearance. Replace your GM frequency-type sensor with Lingenfelter mass airflow sensors.
( 1 )
$332.45
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 22 )
$269.99
The engineers at BBK have added to their arsenal of EFI performance parts with these mass airflow sensors. Starting with an all-new 356 aluminum casting, each unit is powdercoated and then fully CNC-machined to exact specifications. They are then fitted with one of BBK's new electronically calibrated mass air sensor modules (except where noted), to ensure an accurate air/fuel ratio for the best possible performance potential. Dyno testing has shown horsepower gains, while maintaining an accurate air/fuel ratio.
( 23 )
$269.99
FAST 5-wire wideband oxygen sensors are designed for wideband, closed-loop applications. They can read air/fuel ratios from 10:1 to 16:1.
( 10 )
$320.95
MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.
( 3 )
$299.95
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$289.99
MSD Power Grid wide band oxygen sensors are replacements for the MSD Power Grid wideband O2 sensor module. The LSU 4.9 is the robust design combined with a high production quality standard. They will also work with Holley Sniper EFI and Terminator X Systems. MSD Power Grid wide band oxygen sensors feature anti-seize pre-applied to sensor threads for an easy install and removal, and they are compatible with gasoline, methanol, ethanol, E85, propane, and diesel.
( 1 )
$299.95
Holley Commander 950 wideband replacement O2 sensors are the ultimate additions to any new or existing Commander 950 EFI system. They plug directly into any Commander 950 harnesses and accurately measure any air/fuel ratios between 10:1 and 20:1. This allows the engine tuner to read the air/fuel ratios in real time for extremely precise tuning. These sensors are designed for use with Holley controllers only. They are not intended to be replacement sensors for factory fuel injected vehicles.
Not Yet Reviewed
$368.95
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$272.99
—
$323.99
Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.
( 6 )
$279.63
—
$500.65
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$255.99
—
$500.99
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$328.95
When your OEM sensor malfunctions, replace it with a genuine Chevrolet Performance flex fuel sensors for better mpg and overall performance. These devices send data to your engine management system concerning the percentage of ethanol in your fuel; this allows you to adjust the ignition timing and fuel quantity to be injected. If you're receiving poor data, the result is poor performance. These high-quality Chevy sensors use quick-connect style fuel inlet and outlet attachments for easier replacement. Keep your dual-fuel Chevy in top running condition with Chevrolet Performance flex fuel sensors.
( 1 )
$299.99
Granatelli Motor Sports slot-style mass airflow sensors have been calibrated on their in-house MAF dyno and flow bench to optimize performance for your specific application. Designed to help you improve your mileage and throttle response, they also improve your overall performance from 2,000 rpm to redline without voiding your factory warranty. Granatelli Motor Sports slot-style mass airflow sensors can be installed in 10 to 15 minutes with basic hand tools and are compatible with most electronics and aftermarket bolt-on performance equipment.
( 7 )
$322.59
—
$355.06
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$250.99
—
$520.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
