Availability
Showing In Stock Items. Show All 7 Items.
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$349.95
HalTech's new multi-function CAN gauge displays real-time data from your HalTech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series
Not Yet Reviewed
$430.00
Wagner Tuning offers MFD32 data acquisition displays for a wide range of vehicles, including cars and trucks from Audi, Volkswagen, Ford, and Toyota. Now you can always have all relevant values in view. With these advanced cutting-edge displays, you gain access to all the data from your engine control unit. Each Wagner display queries the sensors directly via the Can Bus protocol and presents the information on the reliable MFD28 display. Wagner has fine-tuned the manufacturer-specific Can Bus protocols to achieve maximum query speed. MFD32 displays seamlessly integrate into your vehicle's interior. Key features: * Perfect integration into your vehicle's interior * Query up to 128 sensors * 10 individually customizable views with our DSS - Display Setup Software * Pre-configured views for a quick start with our display * Easy Plug-and-Play installation with our cable set – simply plug it in and you're ready to go * 4 additional analog inputs for monitoring exhaust temperature, oil pressure, and more * Direct ethanol sensor integration * Best readability with an optional anti-glare film * Sensor querying on par with manufacturer diagnostic tools Additional Features: * Performance meter: Measure your acceleration times with the Performance Widget: 0-100, 100-200, 0-200 * Data logging: Log all data on the internal SD card—whether it's "on-demand" (start with a fingertip) or permanent. All data from your last drive is stored * Preset alarms: Activate and customize pre-set warning messages, such as receiving a significant warning when the exhaust temperature exceeds 900 degrees F * 4 Analog additional inputs: Connect additional temperature and/or pressure sensors for further monitoring possibilities, including exhaust temperature or exhaust backpressure. An ethanol sensor can be connected to one of the digital inputs * Error reading/deletion: Read engine control unit errors in plain text and delete them * Customization: Customize the startup screen or choose from various widgets to tailor the display to your preferences * Seamless vehicle integration: Left-hand and right-hand drive displays are available --- Access to all engine control unit (ECU) data: Wagner Tuning provides your display with a pre-configured TRI file as standard. This file defines all the sensors that can be queried, including: * Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature * Pressures: Boost pressure, ambient pressure, oil pressure * Lambda/Mixture: Lambda target/actual, short-term lambda adaptation, long-term lambda adaptation, MAF, engine load, torque * Driver dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position * Other: RPM, total ignition angle, gear, battery voltage, ignition angle correction per cylinder * Analog inputs: Additional sensors like oil temperature, fuel pressure, oil pressure, exhaust temperature, and more can be added, including an ethanol sensor for Flex Fuel vehicles * Please note that not every engine provides all these values
Not Yet Reviewed
$499.00
Computech vacuum pressure monitor kits allow you to measure pressures from -14.7 to +30 in. of mercury. With calibration values available for inches of mercury (inHg) or pounds per square inch (psi), they work great for low-range pressures that have a tendency to go into a vacuum state, such as boost pressure. Computech vacuum pressure monitor kits include a stainless steel pressure transducer and a 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$359.95
Computech 15 psi pressure monitor kits are extremely accurate low-range pressure sensors, perfect for monitoring carbureted fuel pressure and boost psi. The pressure sensor will monitor from 0 to 15 psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Computech 100 psi pressure monitor kits are extremely accurate and will be sure to capture every little pressure change. Measuring accurately throughout the entire zero to 100 psi range, they work great for oil, boost, or fuel psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Wagner Tuning offers MFD28 data acquisition displays for a wide range of vehicles, including cars and trucks from Audi, Volkswagen, Ford, BMW, Dodge, and Ram. Now you can always have all relevant values in view. With these advanced cutting-edge displays, you gain access to all the data from your engine control unit. Each Wagner display queries the sensors directly via the Can Bus protocol and presents the information on the reliable MFD28. Wagner has fine-tuned the manufacturer-specific Can Bus protocols to achieve maximum query speed. These displays seamlessly integrate into your vehicle's interior. Key features: * Perfect integration into your vehicle's interior * Query up to 128 sensors * 10 individually customizable views with Wagner Tuning's DSS (Display Setup Software) * Pre-configured views for a quick start with our display * Easy plug-and-play installation with Wagner's cable set; simply plug it in and you're ready to go * 4 additional analog inputs for monitoring exhaust temperature, oil pressure, and more * Direct ethanol sensor integration * Best readability with an optional anti-glare film * Sensor querying on par with manufacturer diagnostic tools Additional Features: * Performance meter: Measure your acceleration times with the Performance Widget: 0-100, 100-200, 0-200 * Data logging: Log all data on the internal SD card—whether it's "on-demand" (start with a fingertip) or permanent. All data from your last drive is stored * Preset alarms: Activate and customize pre-set warning messages, such as receiving a significant warning when the exhaust temperature exceeds 900 degrees F. * 4 Analog additional inputs: Connect additional temperature and/or pressure sensors for further monitoring possibilities, including exhaust temperature or exhaust backpressure. An ethanol sensor can be connected to one of the digital inputs * Error reading/deletion: Read engine control unit errors in plain text and delete them * Customization: Customize the startup screen or choose from various widgets to tailor the display to your preferences * Seamless vehicle integration: Versions for left- or right-hand drive are available --- Access to all engine control unit (ECU) data: Wagner provides your display with a pre-configured TRI file as standard. This file defines all the sensors that can be queried, including: * Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature * Pressures: Boost pressure, ambient pressure, oil pressure * Lambda/Mixture: Lambda target/actual, short-term lambda adaptation, long-term lambda adaptation, MAF, engine load, torque * Driver dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position * Other: RPM, total ignition angle, gear, battery voltage, ignition angle correction per cylinder * Analog inputs: Additional sensors like oil temperature, fuel pressure, oil pressure, exhaust temperature, and more can be added, including an ethanol sensor for Flex Fuel vehicles * Please note that not every engine provides all these values
Not Yet Reviewed
$499.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
