Ignition Components Ignitions & Electrical - rotating KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Summit Racing™ Billet Aluminum Marine Distributors

Summit Racing™ billet aluminum marine distributors are designed as direct replacements for marine applications. The distributors feature an aluminum housing and meet or exceed SAE J1171 standards. When you need a replacement distributor to get your ignition system back to working as it should, you can trust a Summit Racing™ billet aluminum marine distributor.

Not Yet Reviewed

$335.99

On Sale

MSD Pro-Billet Crank Trigger Distributors

MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.

4.15 out of 5 stars ( 20 )

$539.95

$413.95

—

$484.95

Sierra Marine YLM Series Distributors

Replace your watercraft's OE distributor with a Sierra Marine YLM Series model. These are modern, high performance magnetic breaker-less upgrades. Their complete, self-contained ignition system combines the triggering device and amplifier into a single unit that sits inside the distributor housing. The self-contained module/pickup assembly has no moving parts to wear out, making YLM superior to many other designs. Their time-tested breaker-less ignition circuit and surface-mounted, thermal-clad construction provide reliability in harsh marine environments. Designed for 12 V negative-ground systems, YLM distributors improve combustion efficiency and spark plug life, provide accurate timing, and have a simple wiring hookup for easy installation. They're designed to work with both OE and aftermarket coils, so you're sure to find the combination you need. Order the model recommended for your marine make and engine application.

5.0 out of 5 stars ( 1 )

$354.50

—

$489.99

On Sale

MSD Street Fire EFI Distributors

MSD Street Fire EFI distributors are ready to drop in your V8 engine and replace the worn-out OEM piece. They feature a factory-style ignition module, along with a durable new cap and rotor. The distributors use a cast housing, making them more affordable, but are much stronger than standard OEM distributors. The MSD Street Fire EFI distributors are available for both Ford and Chevy EFI engines.

3.62 out of 5 stars ( 26 )

$409.95

$367.95

On Sale

MSD Pro-Billet Dual Sync EFI Distributors

MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability

3.82 out of 5 stars ( 17 )

$511.95

—

$579.95

$310.11

—

$459.95

Sierra Marine Delco EST Distributors

Sierra Marine Delco EST distributors are designed as direct replacements for late model GM EST (Electronic Spark Timing) distributors. They feature an aluminum housing and meet or exceed SAE J1171 standards. A steel gear is included which is compatible with a flat tappet or hydraulic roller cam. Their ball bearing and bushing combination provide maximum timing stability and long-life.

5.0 out of 5 stars ( 2 )

$399.99

—

$489.99

PerTronix Flame-Thrower Plug and Play Marine Distributors with Ignitor III® Module

PerTronix Flame-Thrower plug-and-play marine distributors are an amazing piece of equipment that'll have your engine purring like a kitten. They're easy to install; simply connect two wires and you're ready to go. The Ignitor III® module increases spark energy, burn time, horsepower, and mileage, as well as improving combustion. Memory function stores rev limits, while built-in reverse polarity and over-current protection shuts down the system to prevent damage. PerTronix distributors feature lubricated bronze lower bushings and upper ball bearings—which work in conjunction for decreased friction and high rpm vibration—and an adjustable mechanical advance (with limiting functions) permits multiple settings. These distributors are factory set with a performance advance curve, and additional springs are provided for custom advance curves. A suppression style or spiral-wound spark plug wires must be used.

5.0 out of 5 stars ( 1 )

$438.15

—

$463.10

Sierra Marine Flame-Thrower Electronic Distributors

Sierra Marine Flame-Thrower electronic distributors are magnetic triggered billet distributors. They are designed to meet or exceed SAE J1171 standards. Features and benefits include: * Cobalt magnets and Hall Effect trigger for stable timing and precise spark duration * Compensates for inherent electronic delay * Synchronized peak current and spark timing reduces heat build-up * Compatible with most capacitive discharge ignition boxes * Integrated patented Ignitor II technology with adapter dwell control * Non-vented distributor cap equipped with stainless steel fasteners * Triple screen spark arrestor for added protection

Not Yet Reviewed

$479.99

—

$499.99

Sierra Marine Thunderbolt IV HEI Distributors

Sierra Marine Thunderbolt IV HEI distributors are designed as a direct replacement for Mercury Thunderbolt IV ignition distributors. They use a hall effect-type sensor to trigger ignition accurately, even at low rpm. They meet or exceed SAE J1171 standards.

3.0 out of 5 stars ( 2 )

$289.99

PerTronix Flame-Thrower Plug and Play Marine Distributors with Ignitor II® Module

PerTronix Flame-Thrower billet plug and play marine distributors feature the Ignitor II® electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.

4.31 out of 5 stars ( 80 )

$319.99

—

$418.00

Sierra Marine YL Series Distributors

Sierra Marine applied decades of ignition experience to the YL Series points distributors. Built with advanced technology and materials, these distributors deliver more reliability for today's marine performance engines. They have stabilized points to eliminate point float and bounce, a high-dielectric condenser with a brass case for corrosion resistance, and self-lubricating bushings for maintenance-free durability. YL Series distributors also feature Mylar insulation for greater protection against current leaks and shorting; plus Sierra Marine's Super-Duty cap and rotor. The distributors work with both OE and high performance coils. Order the model recommended for your watercraft make and engine application.

3.5 out of 5 stars ( 4 )

$379.99

—

$429.99

On Sale

MSD Ultra 6AL Ignition Boxes

The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black

4.2 out of 5 stars ( 10 )

$357.95

$322.15

On Sale

MSD Ultra 6AL Plus Ignition Boxes

The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)

3.56 out of 5 stars ( 9 )

$478.95

$430.95

On Sale

MSD Flying Magnet Crank Trigger Kits

MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.

4.65 out of 5 stars ( 52 )

$499.95

—

$537.95

$448.95

—

$483.95

BluePrint Engines Pro Billet Ready to Run Distributors

BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No

5.0 out of 5 stars ( 5 )

$299.99

Moroso Crank Trigger Ultra Series Kits

You can benefit from a stronger and more consistent trigger signal with Moroso crank trigger Ultra Series kits. These kits use a transducer mounting bracket, which allows for a better timing adjustment range over the others. Their damper register locates the crank trigger wheel to help keep it perfectly aligned and concentric as it rotates. Other product features include built-in strain relief, a double-cavity nylon connector, and powerful rare earth cobalt magnets.

4.0 out of 5 stars ( 4 )

$345.41

—

$403.99

PerTronix Flame-Thrower British Engine Performance Distributors

PerTronix Flame-Thrower British engine performance distributors are modeled after the 45D Series distributor. Built using all-new castings, these distributors are precision-machined for an exact fit. They deliver twice the voltage to your spark plugs, increasing horsepower, fuel economy, and spark plug life. Flame-Thrower Performance distributors for British engines feature rotating cobalt magnets that trigger a Hall Effect integrated circuit. There are no points to burn or moving parts to wear out--in fact, you can expect a 2:1 improvement over points in current fall time for increased coil output. Their tailored advance curve provides optimal performance and drivability. PerTronix Flame-Thrower British engine performance distributors are made using an epoxy molding, making the module impervious to oil, grease, dirt, and moisture. Offered for 12 V negative and positive ground systems, these distributors feature stable timing with no need for adjustments.

5.0 out of 5 stars ( 11 )

$256.99

—

$402.10

PerTronix Flame-Thrower Performance Cast Rover V8 Distributors

Replace your worn out Lucas 35D distributor with a Pertronix Flame-Thrower performance cast Rover V8 distributor that will deliver the performance you demand. These Flame-Thrower performance distributors are the perfect solution for Rover V8 engine swaps. Available with integrated Ignitor or Ignitor II technology increases energy levels and provides maintenance free operation. Installation is simple with only two wires to attach. These distributors are made from all new castings and modeled after the original Lucas 35D housing. Each distributor is then precision machined for an exact fit. Additional features include: * All new lightweight cast aluminum housing * Integrated electronic ignition delivers more voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life * Rotating cobalt magnets trigger the Hall Effect integrated circuit which provides precise timing * High dielectric strength distributor cap * Balanced rotor with overmolded brass contacts * Legal in all 50 states carrying CARB EO# D-57-23

4.5 out of 5 stars ( 8 )

$318.80

—

$383.00

FAST Magnetic Crank Trigger Kits

FAST magnetic crank trigger kits are setting the new industry standard for timing accuracy while preserving compatibility with other brands' ignition systems. Crank triggers are known to provide the most accurate crankshaft rotation measurement; however, modern fuel injection systems and sophisticated testing equipment have exposed inadequacies in traditional crank trigger designs. To correct for timing fluctuations in high-rpm racing applications, FAST engineers replaced the fluctuation prone 2-wire inductive pick-up with a modern digital hall-effect design. This digital hall-effect pick-up, coupled with samarium cobalt magnets installed in the trigger wheel, result in crank rotation measurements that are accurate to a quarter of a degree from zero to 13,000 engine rpm. These pickups are far less susceptible to electromagnetic noise interference than 2-wire designs. Additionally, the pick-up accuracy is unaffected by electrical system voltage variations—maintaining quarter-degree timing accuracy from 7 V to 30 V DC. Outputting a clean square-wave signal, FAST magnetic crank trigger kits can trigger ignition boxes directly or integrate with EFI systems such as the FAST EZ-EFI 2.0, XFI Sportsman, and XFI 2.0. An integral LED eases timing calibration and diagnostics. These kits don't sacrifice durability for technological innovation. Crafted from billet aluminum then black anodized, the trigger wheels and pick-up brackets will withstand harsh racing environments. OEM-quality braided wire wrap protects the pick-up pigtail, while a weatherproof Deutsch connector terminates the harness. Order the kit recommended for your year, make, and engine application.

Not Yet Reviewed

$490.95

Davis Unified Ignition Marine Performance D.U.I. Distributors

Ahoy! If you're looking for a simple, powerful solution for high performance boating, then these Davis Unified Ignition marine D.U.I. distributors from Performance Distributors are the answer. These virtually waterproof and vibration-proof distributors are easy drop-in units with one-wire hookup. There are no wiring hazards to leave you adrift and no hassles! The electronic Dyna-Module and high-voltage coil are built inside of the distributors and produce a longer spark duration, allowing you to widen your plug gap and get a more complete fuel burn. Marine D.U.I. distributors are available in performance versions that crank up to 7,000 rpm and racing versions at 10,000 rpm. D.U.I. distributors are calibrated by machine to dial-in the smoothest advance curve for your application. They are hand-assembled, polished, lubed, and checked for exact tolerances, and the housings are drilled with flame arrestor holes. All of these features allow you to navigate with instant throttle response and more power. Whether you're taking a leisurely ride around the lakes, offshore cruising, or running the waves, anchor your boat with high performance marine D.U.I. distributors from Performance Distributors.

4.79 out of 5 stars ( 73 )

$399.00

—

$479.00

Sierra Marine Electronic Distributor Conversion Kits

Sierra Marine electronic distributor conversion kits change GM engines with traditional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines to improve performance and combustion efficiency. Sierra Marine conversion kits include: * Sierra YLM distributor * Coil * Ignition wires * Harnesses

5.0 out of 5 stars ( 2 )

$289.99

21 Results Found For "rotating"