Availability
Showing In Stock Items. Show All 23 Items.
Painless Performance 28-circuit universal harnesses include most of the power accessory circuits you have been looking to add to your vehicle. The versatility of these harnesses will allow them to be easily adapted to almost any vehicle. The GM column-mounted harnesses include ignition switch plugs and turn signal switch plugs, pre-terminated and ready to install. They also have pre-wired plugs for the headlights and dimmer switch. The dash mounted units do not include the GM column-mounted ignition switch plugs, but do include the GM column-mounted turn signal switch plugs and terminals. Each harness includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 74 )
$339.99
—
$365.99
American Autowire Route 9 universal wiring systems direct you down an easier road for electrical functionality. Route 9 systems are entry-level kits that provide a complete vehicle wiring solution in a compact, "bulletproof" package perfect for hot rods, rat rods, or any vehicle needing a basic, full-function electrical system. They include a compact, ATO-style fuse panel featuring battery, ignitions, and accessory power busses. Plus, all high-amperage output circuits incorporate the same superior spring steel-reinforced terminals used in their Highway Series wiring systems. American Autowire Route 9 universal wiring systems feature: * Fuse panel and wire connections labeled to identify all circuits by description and their respective fuse ratings. Circuit wiring uses superior insulation that is color-coded and printed at 3 in. intervals with a circuit description * Combination turn signal/hazard flasher mounted on the panel—supports LED lighting for front and rear directional lights, as well as dash turn signal indicator lights * Horn relay mounted inline on the harness * Steering column wiring—supports any user-specified turn signal switch * Instrument cluster wiring included for oil, water, fuel, voltmeter, and tachometer gauges, as well as wiring for directional and high-beam headlight indicators * Engine wiring includes feeds for the coil, oil pressure sender, water temperature sender, tachometer, starter, alternator, and distributor. Main power to the fuse panel and power output from the alternator are supplied through a heavy-gauge feed and fusible link protection * Extra-long wire lengths for custom wire routing * Front lighting includes extra-long leads that can be routed for stock or custom appearances of the headlight, parking light, and directional light leads. Dimmer switch wiring is identified. Headlight connectors and terminals are included * Rear body lighting accommodates turn signals, license light, and brake lights with long-length wires that allow for original or custom routing * Sender lead wires are provided for electric fuel tank sender units * Optional add-on kits are available (sold separately
( 8 )
$360.05
Digital Guard Dawg 2Go Keyless PBS-M Marine push-button start systems allow you to enjoy the unparalleled convenience and security of the latest keyless ignition technology. These systems can be added to any non-CanBus 12 V marine ignition system providing true OEM-quality RFID push button start capability to your boat. The PBS-M units use the same high-security and convenience technology found on today's most advanced luxury vehicles to provide you the ultimate protection for your boat. Simply wave the 2Go Keyless RFID Smart Floaty within a few inches of the systems hidden antenna. The PBS-M control module will authenticate the digital serial number of your Smart Floaty; authorize your ignition system, then with just a push of the start button your motor roars to life! Features include: * Revolutionary RFID Smart Floaty contains keyless technology inside a sink-proof floaty that operates without batteries, is 100 percent waterproof, and 1000 percent secure. They offer a high level of security, and they are completely unique—one of over 6 billion different codes. * Start button with LED status indicator--22mm billet buttons are top-quality, heavy-duty cycle switches with attractive soft brushed finish and illuminated halo LED ring that indicates system status. They are prewired to a 36 in. plug-in harness. * Emergency Bypass Card to access your ignition in case of loss or damage to your Smart Floaty
( 2 )
$299.85
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
ARC relay modules are available in 1 through 5-position units and should be used to purge or stage solenoid operations for fuel pumps. These modules feature a plug-in fuse and 40 amp relay, which can be operated by switching to 12 V or GND.
( 2 )
$312.99
Painless Performance Trail Rocker Jeep JK accessory control systems allow you to control up to eight accessories on your Jeep. They feature a waterproof housing that surrounds the power center with eight fuses and relays. Controlling that unit are five pre-wired switches mounted in your custom dashboard panel for a clean, factory look. The power center provides you with all necessary weatherproof connectors and wiring to control your Jeep accessories--from lights to air lockers.
( 7 )
$399.50
—
$524.99
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 61 )
$278.99
—
$459.99
Ron Francis Wiring Mopar Powered Retro Series wiring kits solve the twists and turns of yesterday's wiring to handle today's capabilities. These 12-circuit models are nearly completely pre-wired and use Hi-Temp crosslink wire. They're ready for stock Mopar alternators up to 140 amps or more, as well as one-wire alternators and other aftermarket units. Wire your turn signals, headlights, taillights, brake lights, gauges/senders, engine (starter, alternator, and distributor), ignition switch, headlight switch, Hi/Lo dimmer switch, 3rd brake light and license plate light. The kit can be used for a dash-mounted or steering column mounted key, high/low, and turn signal switch. Ron Francis Wiring Mopar Powered Retro Series wiring kits offer a drop-in harness for cost-conscious enthusiasts who don't intend to upgrade any components other than the running gear and steering column.
( 5 )
$431.15
Take care of the basics—the right way—with Ron Francis Wiring Mopar Powered Bare Bonz wiring kits. These harnessed units will deliver what you need for your basic engine, dash and lighting, gauges, and some accessories, yet they are built well enough to be compatible with EFI. Bare Bonz kits supply eight fuses, 10-12 circuits, plenty of printed and color-coded, fire-resistant wire, plus easy-to-follow, color-coded instructions. Even though your ride's electrical system is simple, the wiring should still be of superior quality, easy to install, and certainly headache-free. Ron Francis Bare Bonz wiring kits will wire your Mopar with a professional look and performance.
Not Yet Reviewed
$534.05
Standard Motor T-Series ignition starter switches are made to OE specifications to meet the original equipment form, fit and function. Many applications are available, so if you're looking to replace a faulty unit, you can count on Standard Motor for the quality replacement part you need. Order the T-Series ignition switch that is best suited to fit your application.
Not Yet Reviewed
$263.99
If a car thief finds his way around this security safeguard, just hand him the keys and wave goodbye. Ron Francis Wiring Safe & Sound battery disconnects are advanced technology that lets you completely shut down your vehicle's entire electrical system with one simple click! Just route your main battery cable through a remote cutoff solenoid that you've hidden … then trigger it with the key fob as you walk away. Total power shutdown! These units are also ideal for repair safety purposes and for preventing battery drain over periods of inactivity. For additional security, 4-channel Safe & Sound disconnects can be wired to also control three other items, like windows, door locks, or the fuel pump. You can never take too many precautions with your valuable investment!
( 10 )
$274.35
Standard Motor hazard warning switches are direct-fit replacements for the OE units for restoring hazard switch functions. Copper alloy conductors ensure superior electrical conductivity with low-resistive loss, and their robust design and high-grade materials meet the stringent demands of today's service professionals. Standard Motor hazard warning switches are made to OE specifications to ensure proper fit, form, and function. Order the hazard warning switch best suited to fit your application requirements.
Not Yet Reviewed
$316.99
—
$359.99
Electric-Life power window switch kits come in a variety of different styles. This allows you to chose a switch that best complements your vehicle's interior.
( 75 )
$272.99
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 51 )
$528.99
RESTOPARTS® Supplied wiring harnesses are perfect for electrical restoration projects. Available for a variety of makes, models, and years, these reproductions match original factory color codes and connector sizes, but utilize a type of wiring that is more tolerant to heat, than that from the factory. RESTOPARTS® wiring harnesses provide an original appearance with an upgrade in performance for your classic.
( 2 )
$322.99
—
$366.99
Auto Rod Controls switch panels are ideal for grouping your electrical controls where you want them. The face panels are hinged so that they swing down, giving you access to the fuses and wiring. There are also modules available with dual solenoids that allow you to disengage your other controls when starting. They feature 20 amp DC switches and holders for 30 amp fuses.
( 11 )
$324.99
—
$409.99
Modal Header