Availability
Showing In Stock Items. Show All 7 Items.
Lokar interior battery disconnect lever kits are designed to bolt directly to B&M Pro Bandit, B&M Ratchet, Quarter Pro, Precision Performance Products, TCI Thunder Stick, TCI Outlaw, TCI Lighting, and Hurst Quarter Stick shifters, or they can be mounted to the floor. They include a red anodized billet aluminum power lever for quick recognition. They can work in conjunction with a fire system kill switch, a standard 8 ft. push/pull cable, and the necessary mounting hardware.
( 6 )
$316.95
—
$409.95
Certain multiple displacement solenoids (MDS) have plastic housings and low-grade O-rings that fail in extreme heat. Dorman engine cylinder deactivation solenoids upgrade the plastic housing to aluminum and add premium, compression-tested O-rings to prevent premature failures. They include a new gasket and mounting bolt for a complete repair. Dorman engine multiple displacement system solenoids are application specific—made to directly replace the original MDS on certain Chrysler, Dodge, and Jeep applications from 2005-09.
( 3 )
$270.99
LimeWorks hot rod turn signal switches are available in a choice of styles to fit your hot rod, custom, or stocker. They feature: * Choice of 1.5 in. or 1.75 in. diameter hole to fit your column * Two splits for easy bolt-on installation * Machined billet aluminum construction * Flashing tip; no need to drill the dash for turn signal lights * Just bolt it on, wire it up, and go Note: Requires the use of a 3-prong flasher can (not included).
( 1 )
$292.99
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Painless Performance Trail Rocker Jeep CJ accessory control systems allow you to control up to eight accessories on your CJ Jeep. The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it are eight prewired switches mounted in a Painless custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. They easily installs with detailed instructions and a plug-n-play design. Features: * Control up to eight accessories, (8) 30-amp fuses and (8) 30-amp relays * Weatherproof housing around the power center and connections * Custom bolt-on powdercoated bracket for the power center * Various switch panel options mount up to eight LED switches inside the Jeep * Fuses light up when blown
Not Yet Reviewed
$349.99
—
$481.99
Wire up your own switches with the Trail Rocker Relay Center from Painless Performance. The wiring harnesses allow you to control up to eight accessories on your Jeep TJ! These kits use the same relay center found in other Trail Rocker systems. However, they come without the switch panel that allow you to wire up your own switches. The heart of this kit is enclosed in the weatherproof housing that surrounds the relay center with eight fuses and relays. The kit provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories, ranging from lights to air lockers. They are easily installed with the detailed Painless instructions and plug-n-play design. Additional details: * Control up to 8 accessories; (8) 30-amp fuses and (8) 30-amp relays * Weatherproof housing around the power center and connections * Custom bolt-on powdercoated bracket for the power center * Includes all the of the required wiring * Winch-ready! The Trail Rocker system includes dedicated wires for controlling a winch
Not Yet Reviewed
$394.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
