Availability
Showing In Stock Items. Show All 25 Items.
ARB LINX line pressure control kits are used in conjunction with the optional pressure control upgrade. The kits offer "set and forget" simplicity to tire inflation, as well as remote control over your airbag suspension. LINX kits are perfect for easy and accurate adjustment of tire pressures, or controlling a set of air bags with the wireless mobile display--whether inside or outside (up to 10 meters away) your vehicle. Take full advantage of the ARB LINX pressure control module, when you couple your ARB air compressor with their pressure control kits. ARB kits include: * Pressure regulator valve * Transducer * Wiring looms
Not Yet Reviewed
$295.00
Digital Guard Dawg PBS-X modules add push-button start to vehicles with an existing alarm. It's the perfect solution for those who want to add the convenience and elegance of a keyless push-button start system to a vehicle which already has a high-end alarm system with traditional keyless entry installed. The system operates using your alarm's existing alarm remote transmitters—and eliminates the need to carry two different transmitters with you. PBS-X modules use a standard negative output signal found on all traditional alarms to activate and deactivate the system's push-button start functions at the same time your current alarm system arms and disarms. As you approach your vehicle and press the unlock button of your alarm transmitter, the Digital Guard Dawg PBS-X start button LED will illuminate. Just get in, place your foot on the brake and press the start button to fire up your engine!
( 4 )
$398.99
On Sale
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$274.95
—
$299.95
ARC relay modules are available in 1 through 5-position units and should be used to purge or stage solenoid operations for fuel pumps. These modules feature a plug-in fuse and 40 amp relay, which can be operated by switching to 12 V or GND.
( 2 )
$312.99
Mopar Replacement parts and accessories are expedited directly from authorized Mopar dealers located strategically across the U.S. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. These wireless ignition receiver modules fit a variety of vehicles, such as specific Chrysler Town and Country models; Dodge Challenger, Durango, Grand Caravan; Jeep Grand Cherokee; and Ram 1500, 2500, and 3500. Affordable and reliable, the direct replacement modules are built to last. Order the model recommended for your vehicle.
( 16 )
$280.99
Dorman wireless ignition modules are designed to match the fit and function of the original module on specified vehicle years, makes and models. These wireless ignition models, also known as WIN, operate your vehicle's keyless entry remote and starter. When the original WIN fails, it renders the keyless remote and the park/shift interlock useless. These direct replacement wireless ignition modules are an ideal solution for restoring the critical communication between the WIN, key fob, PCM, and the keyless ignition system, and help ensure the proper operation of those systems and other factory-installed features to original equipment standards. They're manufactured with durable materials and engineered for reliable performance. Order the module designed for your application.
Not Yet Reviewed
$473.99
Digital Guard Dawg motorcycle keyless ignition modules provide the ultimate in rider convenience and security. Completely eliminating your motorcycle's ignition key switch, and all the hassles associated with using a key, these KIM modules present the perfect solution with advanced RFID technology and supreme keyless accessibility. You simply carry one of the systems digital RFID "Dawg Tags" with you. As you approach your bike, the KIM modules authenticate your unique RFID Dawg Tag and authorize your ignition automatically. You just climb on, flip your kill switch to ON, thumb your start button, and go! When your ride is over, flip your kill switch to OFF, and you just walk away. The modules automatically arm your motorcycle with dual point immobilization, locking out both your ignition and fuel circuits, leaving your ride fully secured.
( 5 )
$269.00
—
$299.85
FAST offers XIM Ignition Module wiring harnesses for a variety of applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. The XIM Ignition Controller allows you to easily control all aspects of the ignition system when used with a FAST EZ-EFI 2.0, XFI 2.0, or XFI Sportsman. A number of different wiring kits are available for late model GM LS platforms, 5.7 and 6.1 Chrysler Hemis, and Ford's mod motor or the Coyote series. This versatile ignition controller is also capable of giving you coil-per-cylinder operation on any engine using a standard crank trigger and a simple pulse per revolution cam sensor. Connect your XIM ignition controller with one of these wiring harnesses from FAST!
Not Yet Reviewed
$334.95
Vehicles today are built with an abundance of control modules (computers), all working to maintain the essential, as well as standard features you enjoy, need, and have become dependent upon. Mopar Replacement offers a huge selection of modules to keep you safe and happy. Their heat seat control modules will make sure you always have a warm comfy seat when the temperatures outside start dropping. Each one is designed and engineered to provide the correct fit and function, matching that of the original they are replacing. The smart option to restore the optimal performance of your Mopar is with Mopar Replacement modules.
Not Yet Reviewed
$452.99
Auto Rod Controls switch panels are ideal for grouping your electrical controls where you want them. The face panels are hinged so that they swing down, giving you access to the fuses and wiring. There are also modules available with dual solenoids that allow you to disengage your other controls when starting. They feature 20 amp DC switches and holders for 30 amp fuses.
( 11 )
$324.99
—
$409.99
Digital Guard Dawg 2Go Keyless PBS-M Marine push-button start systems allow you to enjoy the unparalleled convenience and security of the latest keyless ignition technology. These systems can be added to any non-CanBus 12 V marine ignition system providing true OEM-quality RFID push button start capability to your boat. The PBS-M units use the same high-security and convenience technology found on today's most advanced luxury vehicles to provide you the ultimate protection for your boat. Simply wave the 2Go Keyless RFID Smart Floaty within a few inches of the systems hidden antenna. The PBS-M control module will authenticate the digital serial number of your Smart Floaty; authorize your ignition system, then with just a push of the start button your motor roars to life! Features include: * Revolutionary RFID Smart Floaty contains keyless technology inside a sink-proof floaty that operates without batteries, is 100 percent waterproof, and 1000 percent secure. They offer a high level of security, and they are completely unique—one of over 6 billion different codes. * Start button with LED status indicator--22mm billet buttons are top-quality, heavy-duty cycle switches with attractive soft brushed finish and illuminated halo LED ring that indicates system status. They are prewired to a 36 in. plug-in harness. * Emergency Bypass Card to access your ignition in case of loss or damage to your Smart Floaty
( 2 )
$299.85
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$433.00
MSD Power Grid 3-stage delay timing controls are an add-on module for use with the MSD Power Grid system (sold separately). These controls let you activate up to three individual outputs based on time. The outputs can trigger a relay to activate nitrous, shifter, etc.; when the clutch/transbrake is released, the Power Grid will start the timers through the CANN connection. They'll also display live ignition timing! Thanks to the advanced data acquisition features of the MSD Power Grid, all of the settings and values you set with the 3-stage delay timer can be reviewed after each run to assist in tuning the program for the next run. Now that's timing control!
( 1 )
$368.95
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Digital Guard Dawg OEM-style start buttons are modified versions of the factory models that have been converted to work with all 2GO Keyless modules. They are beautifully and skillfully made, with many featuring back illumination or soft-glow back lighting and/or LEDs indicating operating status. Digital Guard Dawg offers several popular choices from elegant to race-inspired styles that will put starting power at the tip of your fingers.
Not Yet Reviewed
$309.37
—
$317.30
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 48 )
$436.99
—
$458.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$266.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
