Ignitions & Electrical | Summit Racing

Holley Terminator X Max GM Gen V LT Direct Injection Kits

Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.

Not Yet Reviewed

$3,149.95

—

$3,649.95

Racepak 12.3 in. Displays

The next evolution of Racepak display has arrived. Building on the foundation of the legendary Racepak displays that came before, the new 12.3 in. dash offers unparalleled customization and visibility. The high-resolution, high-brightness, high-contrast, and full-color capacitive touch screen lets you see your Racepak data like never before. Swipe through a variety of multi-purpose layouts on-the-fly! You can use one of the eight pre-configured screen layouts or build your own. Product features: * Plug-and-play support for all Racepak VNet loggers and devices, such as the V300SD, Sportsman, and G2X PRO * Capable of monitoring any VNET channel being broadcast from your Racepack datalogger or device * Dedicated CAN connection for Holley EFI (build V4 100 and newer) * 8 default background skins pre-loaded with unlimited options for importing custom layouts * User definable channel alarms and warnings can be used for oil pressure, AFR, or any other channel on your VNET stream * Quickly swipe between multiple active screens for warmup, race, or whatever you want to monitor * No stylus required, capacitive touch, just like your smart phone * Weatherproof aluminum housing featuring flexible mounting options * Manual or auto-brightness features for easy viewing day or night * Built-in GPS with odometer function (antenna included) * Expandable storage via USB (16GB memory stick included) * 6x 1/4 in.-28 mounting holes for surface or flush mounting, with high-quality hardware included * Includes everything needed for installation * USB keyboard and mouse functionality makes it quick and easy to setup new layouts * Upgradable with future software enhancements

Not Yet Reviewed

$2,049.95

FuelTech FTSPARK GEN II Ignition System

The FuelTech FTSPARK GEN II is an extremely high-energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing. It's developed for high-horsepower combinations and test-proven on 5,000+ horsepower engines! Compatible with any ECU on the market, this system is able to generate a spark with up to 750mJ (mJ=mili Joules) of energy—and is capable of firing the spark with 140 amps of current in the coil primary. With these features, FTSPARK generates a spark with approximately 5x more energy and 10x more current compared to a SparkPRO, ensuring a burn in any condition, especially in extremely rich air/fuel ratios. Models are available for 4-, 6-, or 8-coil applications. Technical description: * Programmable energy via CAN or digital input to adjust the energy level; - 475 V in the primary of the coil, which helps to prevent interference in the system * 140 amps of current in the primary of the coil with Racing CDI FuelTech coil for FTSPARK 750mJ * CAN communication with FuelTech PowerFT ECUs for diagnostic and datalogging * Automotive connector with gold-plated terminals * Serial bus (1 wire) allows the use of only one ECU output that triggers all ignition outputs (only with PowerFT) * Anodized aluminum and plastic case * Maximum working temperature: approximately 212 degrees F * Supply voltage for full power: 14-26 V. Minimum voltage for starting 8 V * Maximum operating frequency: 670 Hz * Compatible with other ECUs on the market. Check compatibility of your ECU with FuelTech tech support Contents of package: * One FTSPARK (GEN II750mJ or EXTREME) module * Installation and operation manual * Mounting hardware kit (4 rubber mounts, 8 washers and 8 nuts)

Not Yet Reviewed

$2,299.00

Haltech Elite 2500 ECU with Plug and Pin Set

Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software

Not Yet Reviewed

$2,044.00

Haltech Nexus R3 VCUs

Haltech's Nexus R3 ECU combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Product features: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: (1) Nexus R3 VCU

Not Yet Reviewed

$2,399.00

Haltech Elite 2500 ECU with Premium Universal Wire-In Harness

Haltech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.

Not Yet Reviewed

$2,409.00

Computech DataMaxx Bracket Kit Data Loggers

For years, data loggers have been expensive and complicated for the weekend racer. Good news, Computech has changed that with the cutting-edge technology of DataMaxx bracket kit data loggers, along with user-friendly software, and 24/7 weekend tech support. Datamaxx supplies the essential information need, plus a beautiful dash. You don't pay for anything you're not going to use with this kit; and you have the option to upgrade any time. Computech DataMaxx bracket kit data logger features: * DataMaxx main module * Billet aluminum enclosure * 100 samples per second per channel * Multiple CAN bus connections * Multiple rpm channels, magneto-compatible * Switch input channels * Warning light outputs * Multiple analog channels * Battery voltage channel * Sensors: engine rpm, driveshaft rpm, fuel psi, oil psi, water temp, and single EGT probe Computech DataMaxx LCD dash function features: * 10 channels per screen * Unlimited screen configurations * Customizable shift and warning lights * SD memory card port * Variable speed playback (1/10x, 1/4x, 1/2x, 1x, 2x, 4x, 10x, 100x) * Single cable connection * Day/night brightness modes * Eliminates need for conventional gauges

4.0 out of 5 stars ( 1 )

$2,349.95

Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management Systems

Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design

4.0 out of 5 stars ( 1 )

$2,379.95

—

$2,505.95

COBB Tuning Porsche Accessport V3 Computer Programmers

COBB Tuning Porsche Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your sports car. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. The Accessport V3s will be the last engine management solution you'll ever need. Programmers are also available with PDK flashing, and will allow you to tune both the engine and transmission control units in your supported Porsche. Order the unit designed for your year, model, and engine application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * COBB tuning is included, with enough space for 100 calibrations * In-vehicle mount with on/off switch * Interchangeable faceplates

5.0 out of 5 stars ( 1 )

$2,010.00

—

$3,595.00

AiM Sports MXS 1.3 Data Loggers

The Aim Sports MXS 1.3 data loggers are a compact, full-color TFT display offering high-contrast viewing for small cockpits. The MXS 1.3 data loggers provide comprehensive data acquisition from ECUs, GPS, internal accelerometers, and sensors, while also offering Wi-Fi connectivity, customizable alarm LEDs, and broad expandability for performance tuning. Roof mountable versions are also available. Choose the AiM MXS 1.3 data logger model that best suits your specific needs. Key purposes, features and benefits: * The MXS 1.3 is designed for compact cockpits where space is limited but high-level data analysis is required * The unit is housed in an anodized aluminum case and is waterproof (IP65 or IP67 depending on model selected) * Superior visibility and design—the data logger features a 5 -inch TFT high-contrast display with an ambient light sensor that automatically adjusts backlight brightness for optimal viewing in various lighting conditions * Advanced Data Acquisition—the system collects data from over 2,000 different ECU protocols, GPS09c module, internal 3-axis accelerometer and gyro, and eight analog/digital inputs * Highly configurable display—users can create custom screens, choosing from a wide library of page styles to display RPM, speed, water temp, oil pressure, and lap times * Convenient connectivity and data review—device features integrated Wi-Fi for wireless data download and configuration up to 50 meters away (the system uses Race Studio 3 software to review and analyze performance data) * Safety and performance tools—includes 6-8 fully configurable RGB alarm LEDs for critical alerts, plus two digital outputs for automating external systems like fans or pumps * Expansion capabilities—the device supports up to 8 expansion modules (such as SmartyCam 3, TC Hub, or Lambda controller) via CAN network * The MXS 1.3 is designed for easy installation, using motorsport-grade connectors to ensure reliable operation in high-performance applications * The roof-mounted module version minimizes signal obstruction, ensuring faster and more accurate track mapping, positioning, and lap times

Not Yet Reviewed

$2,899.00

American Autowire Classic Update Series Wiring Harness Kits

American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location

4.7 out of 5 stars ( 571 )

$2,564.05

11 Results Found For "support"