Availability
An efficient powerplant begins with one of these Chevrolet Performance LS9 engine controller kits. They include all the components required—such as the ECU and harness—to get your legendary beast powered up and running according to your custom specifications. Nothing's better for your Chevy than genuine components to make your project a success. Operate your LS9 engine with a controller kit from Chevrolet Performance.
Not Yet Reviewed
$2,307.22
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$2,349.95
—
$3,399.95
$2,113.95
—
$3,058.95
Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors
Not Yet Reviewed
$2,201.99
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
Ford Performance Parts 2015-17 Coyote 5.0L control packs take the complexity and mystery out of wiring a late model 5.0L Coyote engine! Here are the specs: * Designed to run 2015-17 5.0L 4V Ti-VCT Coyote auto transmission engines with 6R80 Mustang GT 6-speed auto transmission. Manual transmission engines require engine harness GU5Z-12A581-EF, available from your local Ford dealer. * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal that eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors * PCM with Ford Performance calibration requires return-type fuel system. Will not work with returnless fuel system
( 2 )
$2,162.99
Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system
( 1 )
$2,462.99
Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full ECU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 3 )
$2,083.99
—
$2,149.99
Take the complexity and mystery out of wiring your late model, 2018-2023 5.0L Mustang Coyote engine with the Ford Performance Coyote 5.0L control packs! These engine management systems are designed to run Ford Performance 5.0L Mustang Coyote engines. 2018-2023 Coyote 5.0L control packs features: * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal which eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system * Supercharged versions, modified engines, and modified applications require custom calibration Note: Not for use with 2018+ F-150 Engines. Installation of this PCM in a 2018+ Mustang GT will result in a no-start condition.
Not Yet Reviewed
$2,346.99
Looking to add a Ford Performance Parts crate engine to your custom built vehicle? Take the complexity and mystery out of wiring your new build with Ford Performance Parts crate engine control packs! Features include: * Unique controls pack harnesses to replace stock body harnesses; designed for custom-built vehicles * OBD-II diagnostic ports to assist in vehicle calibration uploads and diagnosis of problems * PCMs with Ford Performance Parts performance calibration (custom calibration required on some engines and for aftermarket intake systems) * Electronic throttle control accelerator pedals, eliminating throttle cable routing problems * Power distribution modules * Requires return-type fuel system, will not work with returnless fuel system
( 1 )
$2,323.99
Haltech's Nexus R3 ECU combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Product features: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: (1) Nexus R3 VCU
Not Yet Reviewed
$2,399.00
Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with the Ford Performance Parts Gen 4X 5.0L Coyote Control Packs with 2018-20 10R80. They provide a straightforward solution for installing and running a Gen 4X Coyote crate engine in custom vehicle builds, particularly with a 2018-20 Mustang or F-150 10R80 transmission. These control pack kits come with a power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors, providing many of the necessary components needed for a successful installation. Product Overview and details: * This control pack is specifically designed to run the M-6007-M50H 5.0L Coyote crate engine with a 2018 to 2020 Mustang or F150 10R80 transmission * Includes a PCM (Powertrain Control Module) with a unique Ford Performance calibration specifically designed to optimize performance of the Gen 4X Coyote with the specified 10R80 automatic transmission * Includes Electronic Throttle Pedal eliminating cable routing issues * Unique control pack harness replaces the stock body harness and is designed for custom vehicle installation * Includes an OBD-II diagnostic port for trouble-shooting/code reading, which is essential for diagnosing potential issues and uploading calibrations * Includes power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors * Requires return-type fuel system Important Notes: This control pack is intended for competition or off-highway use only and may violate laws and regulations regarding motor vehicle emissions if used on public roads. Not for use with any production F-150 or Mustang Coyote engine. Installation of PCM in a production Mustang will result in a no-start condition.
Not Yet Reviewed
$2,317.99
Unlike controllers from regular-production vehicles (which may or may not come with a used engine), Chevrolet Performance uniquely calibrates their LT5 engine controller kits for installation in older vehicles. They arrive with many features required for late-model production vehicles in the "off" position to prevent triggering diagnostic trouble codes, which could also affect performance or require additional calibration adjustments. LT5 engine controller kits offer all the required components to plug into the engine and get it running—from the controller itself and the accompanying wire harness to the mass airflow sensor, oxygen sensors, and even a throttle pedal assembly for engines equipped with an electronic throttle body. Chevrolet Performance LT5 engine controller kits also include detailed instructions to help you do it right the first time, even if you have no experience!
Not Yet Reviewed
$4,921.66
—
$5,228.80
Haltech Nexus S3 ECUs feature cutting-edge technology and innovative features. Designed for the next generation of automotive enthusiasts and professionals, these state-of-the-art ECUs seamlessly combine powerful engine control with a range of additional functionalities, making them versatile and comprehensive solutions for everything from everyday driving to high-performance racing. The Nexus S3s are fully compatible with myriad of Haltech devices, and with high-speed USB and Wi-Fi connectivity, you'll experience seamless communication between the ECU and your tuning device. Haltech Nexus S3 ECU kits include Nexus S3 ECU, mounting bolts, USB-C cable and dust cap, Quick Start Guide and wiring diagram. Inputs/outputs: * 8 Peak/hold injector drivers (can be used as low side drive outputs) * 8 Low current ignition outputs (can be used as low side drive outputs) * 6 Low side drive outputs, PWM capable (DPOs) * 4 Push-pull / half bridge outputs (8A, PWM capable), e.g. for electronic throttle * 1 ECR output * 11 0 to 5V analog inputs with redundancy for electronic throttle and switchable 5V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 Synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs * 1 On-board wideband controller, supporting NTK and LSU4.9 * 1 On-board 4-bar MAP sensor * 2 CAN ports with switchable termination
Not Yet Reviewed
$2,094.99
Chevrolet Performance DR525 engine controller kits operate DR-525 racing engines and are strictly for off-road usage. They include throttle pedal for electronic throttle body communication. Chevrolet Performance DR525 engine controllers are factory-sealed units, incorporating a tamper-proof design to comply with rules mandated by the NMCA. Included in the kits: * Engine control module (flashed and locked with the appropriate calibration) * Engine harness * Accelerator pedal * Mass airflow (MAF) sensor * MAF sensor mounting boss * MAF mounting screws and washers * Oxygen sensors * Oxygen sensor mounting bosses
Not Yet Reviewed
$2,478.01
Haltech Nexus R5 VCUs with plug and pin set combines the functionality of a power distribution module, a data logger, a dual channel wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Features: * 18 Injector drivers * 12 Ignition drivers * 12 8 amp outputs * 4 25 amp outputs * 23 AVI analog inputs with redundancy for electronic throttle and switchable 5 V pullup * 10 SPI synchronous pulsed inputs * 8 DPO low side drive outputs * 2 onboard wideband controllers, supporting NTK and LSU4.9 * 3 CAN ports with switchable termination Nexus R5 kits include: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna RP-SMA 108mm * Mounting bolts * USB-C cable * USB-C dust cap * Plug and pin set: -- AMP 26-pin key 1 and 3 -- 34-pin key 1 and 2 -- DTP-4
Not Yet Reviewed
$4,498.00
Haltech's Nexus R3 VCU with plug and pin set combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Product details: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: -- (1) Nexus R3 VCU -- Plug and Pins: AMP 34 Pin 4 Row 3 Key Superseal -- Plug and Pins: AMP 34 pin 4 Row 4 Key Superseal -- Plug and Pins: Male Deutsch DTP-06-4S - Black connector (25 amp) VCU features: * Controlled via NSP (Nexus Software Programmer) * Long term learning * Stepper motor control * 4D closed loop boost control * Closed loop CO2 control * Rotational idle * Launch control * Traction control * Anti-lag * Dual knock control * Trans brake control * Race timer * Multi-stage fuel injection * Multi-level engine protection * 6-stage nitrous control * 4-sensor variable cam control * Intake air bleed control * Flat shift control * Shock travel and ride height control * Advanced torque management * On-board Wi-Fi * On-board data-logging (128MB) * AUTOMATIC TRANSMISSION CONTROL -- Ford AODE/4R70W -- GM 4L60E -- GM 4L80E -- Toyota A340E -- Lenco -- Liberty
Not Yet Reviewed
$2,535.00
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
These Chevrolet Performance 556 hp LSA engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LSA supercharged Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,183.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
