Availability
Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet
( 1 )
$2,167.43
Banks Power Ford 2011-2015 6.8L V-10 Class A Motorhome PowerPack systems eliminate factory restrictions with free-flowing intake and exhaust components to boost performance, efficiency, and engine life, while adding hefty power—all at a modest cost. They also stretch your driving time between fill-ups! The PowerPack components work in concert to optimize power, torque, mileage, and durability. After years of real-world Research and Development on the open road, the folks at Banks Power know what it takes to efficiently get every extra ounce of horsepower and torque out of your 6.8L Ford V-10 engine in order to get your Class-A Motorhome running at its full potential. With its free-flowing components and mandrel-bent tubing that dramatically reduce back-pressure, your Ford Class-A Motorhome will instantly gain an overall improvement in horsepower, torque, throttle response and fuel economy.
Not Yet Reviewed
$2,769.00
—
$3,269.00
Banks PowerPack systems optimize your Ford 1994-97 7.3L Powerstroke engine for maximum airflow, horsepower, torque, and efficiency in one convenient package. Banks Power manufactures these kits from quality materials to ensure performance and durability. Kits include: * Ottomind computer programmer (PowerPak calibration) * Ram Air filter and service kit * Techni-Cooler intercooler assembly with TwinRam manifold inlet * Powdercoated steel boost tubes * Monster stainless steel 3.5 in. tailpipe * 4.0 in. stainless steel exhaust tip * Transcommand transmission management module * Dynafact pyrometer * Boost gauge assembly
Not Yet Reviewed
$3,549.00
—
$3,849.00
On Sale
Cobb Tuning 2015-2021 Subaru WRX NexGen Stage 2 Redline Carbon Fiber Power Packages were created to re-establish the modification and upgrade paths for supported vehicles that have been impacted by the removal of downpipes, providing similar performance and excitement. These power packages aim to provide significant, emissions-compliant performance upgrades by combining a high-flow intake, a more efficient intercooler, an improved charge pipe, a precise boost control solenoid, and a comprehensive tuning solution with the Accessport V3, all while retaining the stock catalytic converter. By combining the Accessport with the high-flow intake, more efficient intercooler, improved charge pipe, and precise boost control, these COBB Tuning Subaru WRX NexGen Stage 2 Redline Carbon Fiber Power Packages deliver meaningful, repeatable power gains over stock and previous Stage 1 and 1+Intake tunes. Features and benefits: * Application-specific for 2015-2021 Subaru WRX models * Constructed from high-quality materials * Offers significant power gains * The in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time * Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts) * More processing power, memory, and storage to flash faster while saving all your maps and logs * Simple ECU flashing with gauge package! Package includes the following: *(1) Accessport V3—this is the core tuning device that flashes an optimized map onto the vehicle's ECU, allowing it to take advantage of the increased airflow and boost from the other components * (1) Redline Carbon Air Intake kit—this high-flow intake system replaces the stock airbox and intake, providing smoother and greater airflow to the turbocharger, which requires a tune to properly calibrate the mass airflow sensor * (1) Intercooler kit includes a much larger intercooler than stock unit significantly increases air cooling efficiency and airflow, which is crucial for maintaining performance and preventing heat soak in turbocharged cars * (1) 3-port Boost Control Solenoid provides more precise and consistent control over boost pressure, leading to more reliable and repeatable power delivery * (1) Charge pipe kit—replaces the stock plastic pipe with a more durable, stronger, and better-looking part to ensure smooth airflow into the intercooler * (1) COBB badge
Not Yet Reviewed
$2,865.00
$2,435.25
COBB Tuning Ford Stage 2 Power Packages are bundles of power with an accent of style. A step up from the Stage 1 Plus kits, Stage 2 packages provide not only the amazing Accessport V3 and flow-enhancing air intake systems, but also include front-mount intercoolers and a custom chrome, OEM-quality COBB vehicle badge. Some power packages also include rear motor mounts for added traction. And for those who want more power but live in CARB states, COBB offers appropriate power packages with CARB-approved Accessport V3s. No matter which you choose or need for your Fiesta, Focus, or Mustang, COBB Tuning Stage 2 power packages will deliver aggressive, but safe calibration, consistent power delivery, and enhanced sensory feedback.
Not Yet Reviewed
$2,340.00
—
$2,720.00
Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors
Not Yet Reviewed
$2,201.99
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system
( 1 )
$2,462.99
These Chevrolet Performance Parts LS 376/525 hp engine controller kits are designed for controlling your GM LS 525 hp engine. They include a new controller, engine harness, mass airflow meter, mass airflow meter mounting boss, accelerator pedal assembly, two oxygen sensors, two oxygen sensor mounting bosses, and an instruction manual.
( 1 )
$2,225.39
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 3 )
$2,083.99
—
$2,149.99
Take the complexity and mystery out of wiring your late model, 2018-2023 5.0L Mustang Coyote engine with the Ford Performance Coyote 5.0L control packs! These engine management systems are designed to run Ford Performance 5.0L Mustang Coyote engines. 2018-2023 Coyote 5.0L control packs features: * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal which eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system * Supercharged versions, modified engines, and modified applications require custom calibration Note: Not for use with 2018+ F-150 Engines. Installation of this PCM in a 2018+ Mustang GT will result in a no-start condition.
Not Yet Reviewed
$2,346.99
Looking to add a Ford Performance Parts crate engine to your custom built vehicle? Take the complexity and mystery out of wiring your new build with Ford Performance Parts crate engine control packs! Features include: * Unique controls pack harnesses to replace stock body harnesses; designed for custom-built vehicles * OBD-II diagnostic ports to assist in vehicle calibration uploads and diagnosis of problems * PCMs with Ford Performance Parts performance calibration (custom calibration required on some engines and for aftermarket intake systems) * Electronic throttle control accelerator pedals, eliminating throttle cable routing problems * Power distribution modules * Requires return-type fuel system, will not work with returnless fuel system
( 1 )
$2,323.99
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$3,003.40
—
$3,961.31
Ford Performance Parts 7.3L gas engine control packs include components and harness to install a 2020 to present Super Duty 7.3L gas engine with a 10R140 automatic transmission in a vehicle. The unique control pack harnesses replace the production body harness designed for custom vehicle builds. These kits require use of a conventional return-type fuel system. Note: Installation of PCM in a production vehicle will result in a "no start" situation.
Not Yet Reviewed
$2,285.99
—
$2,396.99
Chevrolet Performance LS7 engine controller kits are calibrated to run your 2007-2013 LS7 crate engines. These module and harness kits are designed for easy plug-and-play installation, and are inclusive for all components needed to get your LS-family engine running. These Chevy Performance kits include: * Controller * Engine harness * Mass airflow meter and mounting boss * Accelerator pedal assembly * 2 oxygen sensors and bosses * Instruction sheet
Not Yet Reviewed
$2,189.98
These Chevrolet Performance 430 HP LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,167.43
These Chevrolet Performance 556 hp LSA engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LSA supercharged Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,183.46
On Sale
DiabloSport Trinity 2 Platinum/modified PCM performance kits are designed for those who want the best of both worlds: pre-loaded, high performance tunes and custom tuning capability. They feature the Trinity 2 high-resolution, 5-inch capacitive touch screen with full swipe functionality, industry-leading gauge designs, jaw dropping power potential, and a powerful, yet simple, user interface. These performance kits also include an easy-to-install unlocked PCM to accept the tune and keep your stock PCM safe and unaltered. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows enthusiasts like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That's where CMR custom tuning comes in. DiabloSport's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport Trinity 2 Platinum/modified PCM performance kit best suited for your ride!
( 1 )
$2,099.95
Ford Performance Parts 2015-17 Coyote 5.0L control packs take the complexity and mystery out of wiring a late model 5.0L Coyote engine! Here are the specs: * Designed to run 2015-17 5.0L 4V Ti-VCT Coyote auto transmission engines with 6R80 Mustang GT 6-speed auto transmission. Manual transmission engines require engine harness GU5Z-12A581-EF, available from your local Ford dealer. * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal that eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors * PCM with Ford Performance calibration requires return-type fuel system. Will not work with returnless fuel system
( 2 )
$2,162.99
Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with the Ford Performance Parts Gen 4X 5.0L Coyote Control Packs with 2018-20 10R80. They provide a straightforward solution for installing and running a Gen 4X Coyote crate engine in custom vehicle builds, particularly with a 2018-20 Mustang or F-150 10R80 transmission. These control pack kits come with a power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors, providing many of the necessary components needed for a successful installation. Product Overview and details: * This control pack is specifically designed to run the M-6007-M50H 5.0L Coyote crate engine with a 2018 to 2020 Mustang or F150 10R80 transmission * Includes a PCM (Powertrain Control Module) with a unique Ford Performance calibration specifically designed to optimize performance of the Gen 4X Coyote with the specified 10R80 automatic transmission * Includes Electronic Throttle Pedal eliminating cable routing issues * Unique control pack harness replaces the stock body harness and is designed for custom vehicle installation * Includes an OBD-II diagnostic port for trouble-shooting/code reading, which is essential for diagnosing potential issues and uploading calibrations * Includes power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors * Requires return-type fuel system Important Notes: This control pack is intended for competition or off-highway use only and may violate laws and regulations regarding motor vehicle emissions if used on public roads. Not for use with any production F-150 or Mustang Coyote engine. Installation of PCM in a production Mustang will result in a no-start condition.
Not Yet Reviewed
$2,317.99
Unlike controllers from regular-production vehicles (which may or may not come with a used engine), Chevrolet Performance uniquely calibrates their LT5 engine controller kits for installation in older vehicles. They arrive with many features required for late-model production vehicles in the "off" position to prevent triggering diagnostic trouble codes, which could also affect performance or require additional calibration adjustments. LT5 engine controller kits offer all the required components to plug into the engine and get it running—from the controller itself and the accompanying wire harness to the mass airflow sensor, oxygen sensors, and even a throttle pedal assembly for engines equipped with an electronic throttle body. Chevrolet Performance LT5 engine controller kits also include detailed instructions to help you do it right the first time, even if you have no experience!
Not Yet Reviewed
$4,921.66
—
$5,228.80
An efficient powerplant begins with one of these Chevrolet Performance LS9 engine controller kits. They include all the components required—such as the ECU and harness—to get your legendary beast powered up and running according to your custom specifications. Nothing's better for your Chevy than genuine components to make your project a success. Operate your LS9 engine with a controller kit from Chevrolet Performance.
Not Yet Reviewed
$2,307.22
Chevrolet Performance DR525 engine controller kits operate DR-525 racing engines and are strictly for off-road usage. They include throttle pedal for electronic throttle body communication. Chevrolet Performance DR525 engine controllers are factory-sealed units, incorporating a tamper-proof design to comply with rules mandated by the NMCA. Included in the kits: * Engine control module (flashed and locked with the appropriate calibration) * Engine harness * Accelerator pedal * Mass airflow (MAF) sensor * MAF sensor mounting boss * MAF mounting screws and washers * Oxygen sensors * Oxygen sensor mounting bosses
Not Yet Reviewed
$2,478.01
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
