Availability
Summit Bucks
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$22.99
—
$51.99
On Sale
Painless Performance manifold heater relays help the manifold heater to vaporize fuel in the intake manifold when the engine is cold. This will help with cold starts and idling until the engine is up to operating temperature. This kit allows a manifold heater to be used if you are rewiring your Jeep using a Painless chassis harness, using a later style manifold on an older Jeep, or if the factory relay was cut from your Jeep at some point in time by you or a previous owner.
( 1 )
$39.99
$35.99
Nitrous Pro Flow wide-open throttle switch assemblies ensure that your nitrous system is activated only at wide-open throttle—for safety and to prevent engine damage. These switch assemblies easily mount to the carburetor stud and are adjustable to provide consistent nitrous activation. Order the style preferred for your application.
( 1 )
$32.40
Clearance
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$31.99
$20.99
—
$52.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$20.99
—
$51.99
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
Delphi air charge temperature sensors offer a durable OE replacement you can rely on! Built with the latest OE technology, these sensors are a one-piece design that eliminates internal connectors and failure points for more reliable service. Delphi temperature sensors have rugged plastic shells and thermistor pre-mold subassemblies or brass. Plus, they eliminate electrical interference. Get accurate readings--replace your original equipment with Delphi air charge temperature sensors.
( 2 )
$30.99
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 61 )
$28.99
Hella MAP sensors accurately measure the air/fuel ratio of your engine and helps provide the data to the ECM. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$39.99
—
$49.99
NGK Spark Plugs offers NTK MAP sensors for a wide range of applications. They provide manifold pressure information to the engine control unit (ECU). This data is then used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing. The sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing. NTK sensors undergo extreme testing conditions that include thermal shock, vibration, and OBD verification. Order the model recommended for your vehicle.
Not Yet Reviewed
$27.99
—
$56.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$20.99
—
$49.99
Spectra Premium manifold absolute pressure (MAP) sensors work with your intake air pressure to define the proper air and fuel quantities required for the ignition cylinders. They measure the vacuum of the intake manifold (which fluctuates according to engine load) relative to the barometric pressure. Spectra Premium MAP sensors ensure premium performance and durability for you and your ride! Additional features include the following: * Anti-seize thread coating pre-applied on all parts * OE-level reliability and function * All sensors undergo several cycles of thermal shock to ensure reliability in all road conditions * Fit and road-tested to ensure ease of installation and real-world performance * Complete end-of-line testing
Not Yet Reviewed
$24.99
—
$50.99
If you're suspecting a faulty MAP sensor, Beck/Arnley has your answer--these direct replacement MAP sensors! Keeping your ECU updated with the manifold absolute pressure is critical to efficient fuel economy. Faulty sensors sending out the wrong signals can lead to poor overall engine performance and disrupt fuel consumption. Beck/Arnley MAP sensors are fast, easy replacements that require no modifications and are the perfect replacement.
( 1 )
$38.99
—
$49.99
On Sale
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$20.99
—
$44.99
Summit Bucks
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$23.99
—
$49.99
Summit Bucks
Clearance
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 38 )
$20.99
—
$45.99
Bostech MAP sensors provide reliable, accurate measurements with extremely fast response times to ensure your vehicle runs as intended. These replacement sensors match the original equipment in fit and function. Order the model recommended for your vehicle application.
Not Yet Reviewed
$44.95
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$45.99
On Sale
Taylor V8 vertical wire loom kits allow ignition wires to be run vertically along your valve cover and away from your exhaust manifold or header heat. These kits fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six vertical brackets
( 63 )
$40.20
—
$50.90
$36.18
—
$45.81
On Sale
Are you in need of quality replacement components for the Sniper 92mm/102mm throttle body on your Sniper EFI fabricated manifold for GM LS1/LS2/LS3/LS6/LS7 model? Check out what Holley Sniper has to offer, including these throttle position sensors. These quality replacements are sure to do the trick!
( 7 )
$44.66
$40.19
Moroso's Super Looms wire looms can help keep your engine bay looking neat and orderly—as well as prevent ignition crossfire by keeping the plug wires spaced apart. These looms place your spark plug wires safely out of the way of hot headers or exhaust manifolds. They feature chrome plated brackets for stout valve cover mounting, and high temperature plastic separator looms to securely grip the spark plug wires. Moroso Super Looms are available in a variety of colors and styles for fitment with most engines.
( 122 )
$28.99
—
$50.99
Summit Racing™ offers high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes—and the computer uses this information to measure engine load so that the ignition timing can be advanced or slowed as needed. The World's Speed Shop® designed these devices to fit most GM engines, including the LS Series. Summit Racing Equipment® MAP Sensors feature factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$36.99
On Sale
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$35.65
$32.09
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
