Availability
Showing In Stock Items. Show All 76 Items.
Summit Bucks
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$22.99
—
$47.99
On Sale
Painless Performance manifold heater relays help the manifold heater to vaporize fuel in the intake manifold when the engine is cold. This will help with cold starts and idling until the engine is up to operating temperature. This kit allows a manifold heater to be used if you are rewiring your Jeep using a Painless chassis harness, using a later style manifold on an older Jeep, or if the factory relay was cut from your Jeep at some point in time by you or a previous owner.
( 1 )
$39.99
$35.99
Clearance
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$31.99
$20.99
—
$52.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$20.99
—
$51.99
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
Delphi air charge temperature sensors offer a durable OE replacement you can rely on! Built with the latest OE technology, these sensors are a one-piece design that eliminates internal connectors and failure points for more reliable service. Delphi temperature sensors have rugged plastic shells and thermistor pre-mold subassemblies or brass. Plus, they eliminate electrical interference. Get accurate readings--replace your original equipment with Delphi air charge temperature sensors.
( 2 )
$30.99
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 61 )
$28.99
Hella MAP sensors accurately measure the air/fuel ratio of your engine and helps provide the data to the ECM. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$39.99
—
$49.99
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$45.99
On Sale
Taylor V8 vertical wire loom kits allow ignition wires to be run vertically along your valve cover and away from your exhaust manifold or header heat. These kits fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six vertical brackets
( 63 )
$40.20
—
$50.90
$36.18
—
$45.81
On Sale
Are you in need of quality replacement components for the Sniper 92mm/102mm throttle body on your Sniper EFI fabricated manifold for GM LS1/LS2/LS3/LS6/LS7 model? Check out what Holley Sniper has to offer, including these throttle position sensors. These quality replacements are sure to do the trick!
( 7 )
$44.66
$40.19
Moroso's Super Looms wire looms can help keep your engine bay looking neat and orderly—as well as prevent ignition crossfire by keeping the plug wires spaced apart. These looms place your spark plug wires safely out of the way of hot headers or exhaust manifolds. They feature chrome plated brackets for stout valve cover mounting, and high temperature plastic separator looms to securely grip the spark plug wires. Moroso Super Looms are available in a variety of colors and styles for fitment with most engines.
( 122 )
$28.99
—
$50.99
Summit Racing™ offers high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes—and the computer uses this information to measure engine load so that the ignition timing can be advanced or slowed as needed. The World's Speed Shop® designed these devices to fit most GM engines, including the LS Series. Summit Racing Equipment® MAP Sensors feature factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$36.99
On Sale
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$35.65
$32.09
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
Caspers Electronics camshaft position sensor adapter harnesses allow the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connection located at the back of the intake manifold. These harnesses are perfect for LS2 motor conversions—and are compatible with the PCM harness in LS1 Corvette and F-Body cars. They are fully plug-and-play with factory connector and sensor. The high-temperature nylon loom remains flexible, while not melting sitting on top of the motor.
( 7 )
$29.79
On Sale
These Taylor V8 horizontal wire loom kits allow ignition wires to be run horizontally along your valve cover and away from your exhaust manifold or header heat. They fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six horizontal brackets
( 31 )
$50.90
$45.81
Made For You horizontal wire looms keep your plug wires routed neatly and securely away from hot exhaust manifolds or headers. They also eliminate the headaches of maintaining polished aluminum looms and they won't rust or bend either. Made from 6-6 zytel nylon, these sets hold your spark plug wires horizontally alongside your valve cover for a clean, high-tech look. They include wire separators, horizontal mounting brackets, and stainless steel mounting hardware.
( 14 )
$55.95
Moroso universal wire looms keep your spark plug wires where they belong. They'll prevent burning wires with headers or exhaust manifolds, keep your engine neat and orderly, and prevent crossfire by keeping the wires spaced apart. They feature chrome plated brackets for stout valve cover mounting and high temperature plastic looms. They're available in a variety of colors and styles.
( 14 )
$23.99
—
$24.99
On Sale
These FAN-THOM II electric fan relay kits come with a threaded thermostat that screws into the engine block or intake manifold for a clean and professional look. These kits provide protection for your electric fans and wire harnesses. They supply constant voltage, protect against voltage and amperage spikes, and prevent the fan from back-feeding voltage through your vehicle's wire harnesses. These kits include: * SPST 40 amp relay * 30 amp circuit breaker * Thermostatic switch * Relay base with harness * Crimp-on terminals * Mounting hardware
( 77 )
$46.99
$42.29
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$20.99
—
$24.99
Auto Metal Direct offers spark plug wire retainers for a variety of applications. These reproduction wire separators are designed to exact OE specifications to provide a perfect fit and finish. Unsecured spark plug wires not only look unkempt, they can easily be damaged by exhaust manifolds or headers—leading to performance problems and unnecessary repairs. Order the set recommended for your vehicle, and give your engine bay a fresh look at low cost.
( 3 )
$32.99
Caspers Electronics MAP sensor harness adapters make change happen--easily! Whether you want to convert your LS1/LS2 to an LS3/LS9 MAP, adapt to early or late models, or use the factory sensor location under the hood for your XFI/Fast to GN adapters, Caspers offers a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly.
( 3 )
$24.79
Summit Bucks
Top Street Performance MAP sensor extension harnesses help you complete your Velocity intake set-up. They convert an LS1/LS2-style MAP sensor to the later LS3-style. The harness works with Gen IV MAP sensors found in LS3, LS9, LSA, and Top Street Velocity intake manifold applications.
( 1 )
$29.62
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
