Availability
Showing In Stock Items. Show All 35 Items.
Want to maximize the performance of your current HP Tuners setup? HP Tuners offer computer programmer accessories, from USB cables to OBD-2 cables, EIO plugs, and more. These quality hardware components can be used as replacements for worn or misplaced originals, or to upgrade your existing setup.
( 17 )
$34.99
—
$49.99
HP Tuners M8 HPTNET cables are conveniently offered as standalone replacements or spares to keep your GM E41 ECM upgrade kit running smoothly. Identical to the one included in the kits, they ensure seamless communication and operation during ECM upgrades. Whether you've misplaced or damaged your existing cable, or simply need an extra, HP's M8 HPTNET cable is ready to meet your needs.
Not Yet Reviewed
$29.99
Take advantage of your BRP vehicle's full potential with an HP Tuners OBDII adapter cable. Plug the gray insert directly into your BRP's diagnostic port and the black OBDII-end into your MPVI2, MPVI2+, or MPVI3 interface for full functionality. This OBDII adapter cable is required for tuning any supported BRP vehicles, including Can-Am and Sea-Doo.
Not Yet Reviewed
$49.99
On Sale
The Edge accessory system (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the evolution CS or CTS. This means Edge can create optional accessories that can be added to the products by the owner at any time. An optional exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. These replacement (or add-on) EGT leads are computer chip programmer input cables. Get the most from your specific accessory system with lead probe cables.
( 2 )
$46.68
$42.01
On Sale
Manufacturer Rebate
AutoMeter OBD-II Signal Splitters provide remote mount connections for additional devices. These units are low-profile splitter/pass-throughs, and are ideal for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation. They also provide additional, easy-to-access connection points for other onboard devices requiring access to the OBD-II data stream. Other features of AutoMeter OBD-II Signal Splitters are: * Connects to existing vehicle OBD-II port, providing two remote mount connections * 10 in. straight through leads with strain reliefs between 16-pin male and female connectors compatible with J1962 OBD-II Standards * Please note: device and vehicle compatibility may vary. Signal splitter designed to maintain OBD-II data signal integrity across two remote connection points, but does not correct for data bus termination, traffic conflicts, or compatibility of attached devices.
( 11 )
$41.99
$37.79
Banks Power universal OBD II splitters allow you to connect two devices to the OBDII port. The plug is a right angle for minimal interference. Notes: * For use with Banks devices and retractable steps * Not intended for use with Banks devices AND third-party OBD monitors * Most ECMs will only communicate with one diagnostic device at a time. Using a splitter will result in the vehicle's ECM having to choose between devices. One of your devices will not operate properly.
( 2 )
$30.00
Looking for a safe, simple way to mount your FiTech color touch screen tuner? FiTech's Premium magnetic handheld mounts provide an easy and effective way to secure the touch screen controller. They allow you to mount the touch screen nearly anywhere in your car with a sturdy, adjustable stand equipped with two extremely strong magnets to firmly secure the handheld through vibrations, shocks, bumps, and even during spirited track laps! FiTech Premium magnetic handheld mounts are supplied with the injection molded stand, a mounting disc to apply to the dash or console, and a mounting plate designed specifically for the FiTech color touch screen handheld monitor. You can position the tuner where you can easily view the engine parameters and tuning of your FiTech EFI system.
( 3 )
$51.00
On Sale
Keep an eye on your X4 and the road ahead with SCT suction cup mounts for your windshield. These mounts securely hold your programmer with an industrial-strength suction cup, allowing you to safely monitor critical system data without blocking your view. You don't want to hold your X4 while driving, and often there's no passenger to assist you. The solution is quick, easy, and economical--SCT suction cup mounts.
( 7 )
$22.99
$21.99
Open up the power of your diesel engine using Bully Dog GT diesel unlock cables. They feature pre-terminated connections and hook up directly to your Bully Dog GT diesel tuner.
( 2 )
$36.99
On Sale
Edge A-Pillar display mounts have been specifically engineered for an OEM look and fitment to place your monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup-style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and are paintable for a customizable look. Features: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual t-slot mount included * Works with all CTS3 devices including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
Not Yet Reviewed
$59.69
$53.75
On Sale
Bully Dog RAM suction cup mounting kits position your performance device for the best in-use experience possible. Featuring a strong and effective suction cup, stout arms, and a custom T-slot adapter, each of these kits is specifically designed to work with your GT or WatchDog unit. Brace your device on the proper pedestals for secure, safe usage--Bully Dog RAM suction cup mounting kits.
( 1 )
$27.99
$25.19
On Sale
Edge cast aluminum pillar display mounts offer a more permanent and vehicle-specific mount for their CTS3 based devices. The mounts are specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. They provide a sturdy mounting location to replace Edge's standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and can be painted for a custom finish, if desired. Order the model recommended for your vehicle. Additional details: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual T-slot mount included * Works with all CTS3 devices, including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
( 3 )
$49.95
$44.95
On Sale
COBB Tuning anti-glare film kits will reduce glare by about 25 percent on your V3 screen. The kits consist of high-definition protective film and a cleaning kit for your Accessport V3. The film has a light matte finish and is highly scratch and fingerprint-resistant. Cut the glare and keep your Accessport clean with COBB film kits.
Not Yet Reviewed
$25.00
$21.25
On Sale
COBB Tuning Scosche MagicMount Pro Accessport V3 dash mounts are magnetic V3 mounts with interchangeable trim. MagicMount Pro systems can secure your V3 unit to the top of your dash, steering column, or any other convenient location. The cradle-free design uses high-powered magnets to secure your device where you use them most, and their adjustable angle with enhanced soft touch rubber locknut provides secure positioning and optimal viewing. Just hover your Accessport near the magnetic surface of Scosche MagicMount Pro and it instantly locks in place.
Not Yet Reviewed
$30.00
$25.50
CURT offers replacement charging cables for their Tire Linc tire pressure monitoring system for trailers. The cable assembly is intended to plug into the Tire Linc repeater module to connect the unit to a standard wall outlet (P/N 57019) or a trailer's 12 V power supply (P/N 57018). This package includes the wiring harness and a 2-amp fuse. (The complete Tire Linc system is not included.) Additional notes: * Designed to charge Tire Linc TPMS repeater * Wire leads connects to trailer 12V DC power * Compatible with CURT Tire Linc tire pressure monitoring system (P/N 57009) * 3 in. long cable * USB charging block can plug into a 120 V or 240 V outlet (outputs 5 V DC) – Model 57019 only
Not Yet Reviewed
$29.99
—
$49.99
SCT Livewire TS+ pod adapters allow you to make use of any existing 2 1/16 in. gauge pods. Designed specifically for Livewire TS+ gauge tuners, these adapters make convenient A-pillar mounting a snap. The T-slot and optional ball mount design ensure a quick and easy installation of your tuner. Procure a clean and secure mounting location with SCT Livewire TS+ pod adapters.
Not Yet Reviewed
$28.99
On Sale
SCT Livewire TS+ window mounts are designed specifically to help utilize all of the innovative features of your Livewire TS+ tuner/programmer. Use these mounts to attach your module to the vehicle window, so you can easily and safely read the display at a glance. You can affix the Livewire TS+ vertically or landscape-style for the perfect viewing angle. Keep your real-time gauges and data monitoring safely visible with SCT Livewire TS+ window mounts.
Not Yet Reviewed
$25.79
$23.21
On Sale
Edge Products offers simple, inexpensive, non-expandable EGT sensors for your diesel rig. If you're not going to be adding optional accessories and you just want the basics and good quality, Edge EGT sensors are for you. Simply, Edge exhaust gas temperature sensors allow you to accurately monitor critical temperatures and prevent engine damage. Make sure that the added power of your rig isn't creating excessive heat with Edge EGT sensors.
( 4 )
$57.79
$52.05
On Sale
DiabloSport Trinity analog harnesses are designed to make hooking up external sensors much easier. This includes things like boost gauges, air/fuel meters, and EGT sensors. DiabloSport takes their products seriously and it shows, having each and every product inspected not only by machine, but also by their staff. DiabloSport Trinity analog harnesses not only make it possible for you to improve complex computer systems, but they're also easy to use.
( 1 )
$46.30
$25.47
On Sale
Bully Dog BDX windshield mounts are not your average device mounts. Uniquely designed for the Bully Dog BDX, they feature a heavy-duty suction cup base that securely adheres to windshield glass. Four ultra-strong neodymium magnets ensure your BDX device stays front-and-center, no matter what terrain you're on. The included 90 degree HDMI elbow not only eliminates potential strain on your port, but also ensures your wires stay tucked away perfectly for the cleanest setup around. Bully Dog BDX windshield mounts are the perfect match for mounting a BDX device to your heavy-duty rig.
Not Yet Reviewed
$29.99
$26.99
Get access to even more vehicle data using HP Tuners Prolink+ cables to wire in up to two analog signals and one CAN bus signal simultaneously. Prolink+ cables are designed specifically for MPV12+ and MPV13. Specifications: * Two dedicated 0 to 5 V analog inputs * One CAN bus input--500kbps * 100Hz sampling rate * M8 connector to 5 wire harness * For MPVI2+ and MPVI3 interfaces Note: MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.
( 8 )
$49.99
DIYAutoTune TunerStudio tuner cables bring a whole new level of tuning refinement to your car, truck, or motorcycle. This Serial to USB port adapter works properly with all TunerStudio versions. It is highly recommend that the adapter be used if you're tuning a PC/laptop that doesn't have a DB9 Serial connector. Or, you can use another adapter with a genuine FTDI chipset (which this uses). Note: This adapter includes a 2 ft. extension cable, but is only recommended for use if you have vibration issues with the adapter plugged directly into your laptop. USB cable runs are more susceptible to noise than RS232. Therefore, in such instances, it's highly recommended to use the DIYAutoTune 6 ft. tuning cable in combination with this adapter for best results.
( 4 )
$28.99
Get the latest updates for your programmer with one of these Summit Racing™ PC interface cable kits. These kits include everything you need to power your programmer, as well as the interface so you can connect to your home PC or laptop to get the latest updates. Don't get stuck in the dark with an out-of-date tune when you can get the latest using these Summit Racing™ PC interface cable kits.
( 1 )
$29.99
Summit Bucks
2018+ Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners. Z Automotive double bypass kits overcome that obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module. The quick plug-and-play installation takes under 5 minutes—with no wire splicing or cutting. The double bypass harnesses will also work on 2011-17 Chargers/300s and 2015-17 Challengers, for those who want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
( 3 )
$55.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
