Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Sensors
Showing In Stock Items. Show All 396 Items.
Chevrolet Performance MAP Sensors
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$46.99
On Sale
Holley MAP Sensor Adapters
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$41.22
$36.90
—
$47.24
Delphi Camshaft Position Sensors
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$20.99
—
$49.99
ACDelco Replacement Throttle Position Sensors
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 21 )
$46.99
ACDelco GM Genuine Parts Manifold Absolute Pressure Sensors
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 25 )
$22.99
—
$48.99
On Sale
Holley Sniper Throttle Position Sensors
Are you in need of quality replacement components for the Sniper 92mm/102mm throttle body on your Sniper EFI fabricated manifold for GM LS1/LS2/LS3/LS6/LS7 model? Check out what Holley Sniper has to offer, including these throttle position sensors. These quality replacements are sure to do the trick!
( 7 )
$45.78
$41.20
ACDelco GM Genuine Parts Engine Coolant Temperature Sensors
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 72 )
$22.99
—
$30.99
Dorman Engine Oil Pressure Sensors
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$29.99
—
$47.99
ACDelco Air Temperature Sensors
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$22.99
—
$44.99
Bosch Fuel Pressure Sensors
Bosch fuel pressure sensors accurately monitor fuel pressure in your vehicle to ensure a long and healthy life for your engine. Offering OE or better performance, their robust design delivers high resistance to engine vibrations. Get the right information to your vehicle ECU to keep your engine running strong, safe, and efficient. Order the Bosch replacement fuel pressure sensor designed for your specific application.
( 6 )
$39.79
On Sale
Holley Coolant Temperature Sensors
Holley offers several coolant temperature sensors designed for use with their Pro-Jection, Sniper, and other fuel injection systems. They feature brass construction with 3/8 in. thread and will provide the ideal fit and function to monitor your engine's coolant temperature. Select the one designed for your system.
( 19 )
$38.40
$34.56
—
$40.49
Summit Racing™ MAP Sensors
Summit Racing™ offers high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes—and the computer uses this information to measure engine load so that the ignition timing can be advanced or slowed as needed. The World's Speed Shop® designed these devices to fit most GM engines, including the LS Series. Summit Racing Equipment® MAP Sensors feature factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$36.99
Motorcraft Oil Pressure Switches
Motorcraft oil pressure switches will fix your jumpy gauge and prevent misreadings. Without the proper amount of oil, your engine will experience a lot of damage. If the oil light blinks or comes on, but the oil levels in the engine are fine, then a faulty oil pressure sensor may be to blame. Replace your faulty switch with genuine Motorcraft equipment, designed for durability and electrical performance.
( 14 )
$22.99
—
$23.99
ICT Billet Mass Airflow Sensor Mounting Flanges
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$29.99
—
$34.99
Summit Racing™ MAP Sensor Adapters
Summit Racing™ MAP sensor adapters enable you to use a Holley LS2 harness with LS3 engines. These adapters feature pre-terminated connectors and wiring for a direct plug-and-play installation.
( 4 )
$28.99
Delphi Engine Crankshaft Position Sensors
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$20.99
—
$48.99
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$23.50
—
$49.99
On Sale
Holley Sniper MAP Sensors
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$36.54
$32.89
ACDelco Gold Engine Coolant Temperature Sensors
ACDelco Gold engine coolant sensors are a high-quality aftermarket replacement component for many vehicles on the road today. These premium sensors are manufactured to exceed your expectations for fit and performance. Order the model recommended for your application.
( 44 )
$24.99
—
$27.99
ACDelco GM Genuine Parts Oxygen Sensors
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 105 )
$22.99
—
$49.99
Summit Racing™ Easy O2 Sensor Mounts
Summit Racing™ Easy O2 sensor mounts simplify the addition of wideband to your car! Not a welder? No problem--our 304 stainless steel oxygen sensor mounts are easy to install. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp—no welding is necessary! Add O2 sensors with our no-hassle Summit Racing™ Easy O2 sensor mounts, available for a variety of pipe diameters.
( 55 )
$43.99
Bosch Premium Original Equipment-Type Oxygen Sensors
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 178 )
$39.79
—
$48.99
Standard Motor Crankshaft Position Sensors
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$20.99
—
$49.99
On Sale
Hooker Clamp-On Oxygen Sensor Bungs
More simplistic EFI systems have made conversions extremely popular, but adding the sensor often means making major changes to your exhaust system. Hooker clamp-on oxygen sensor bungs are designed to work with your current exhaust for an easy installation. Drill an appropriate size hole in the indicated location, clamp on the 304 stainless steel bung, and install the sensor. Simplify EFI conversions with Hooker clamp-on oxygen sensor bungs.
( 30 )
$51.19
$46.07
