Availability
Showing In Stock Items. Show All 191 Items.
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$65.99
—
$66.99
$37.50
—
$40.50
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$49.95
—
$61.69
$33.93
—
$49.05
On Sale
The MSD magnetic pickups are the same high-output assemblies that are currently found in all MSD distributors. They're made to replace defective or damaged pickups in all MSD distributors.
( 116 )
$49.95
$44.95
—
$46.09
On Sale
MSD crank trigger distributor rotors keep your distributor running like new. Molded from strong, durable Rynite material, these rotors are designed specifically for use with MSD crank trigger distributors. The rotor tip is secured with a screw for high rpm racing applications.
( 6 )
$57.49
$51.75
On Sale
Mallory constructed these distributor caps from innovative, space-age plastic. Mallory distributor caps combine the high dielectric strength required for today's high-energy ignition systems with highly impact-resistant qualities to prevent damage.
( 104 )
$59.89
$36.55
—
$53.95
Make sure that you have the right distributor gear for your steel billet roller cam. Our bronze distributor gears from are made from high-quality aluminum bronze alloy and are precision-machined for smooth, reliable operation.
( 11 )
$40.99
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$57.49
$39.50
—
$51.75
On Sale
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 133 )
$27.72
—
$53.05
$24.95
—
$47.75
Billet Specialties distributor hold-down clamps are just what you need to hold down your distributor in style. They are the perfect way to give your engine compartment that finishing touch.
( 84 )
$43.95
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 104 )
$28.99
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 378 )
$22.99
—
$54.99
On Sale
Mallory constructed these distributor rotors from an innovative, space age plastic that combines the high dielectric strength required for today's high-energy ignition systems and high impact-resistant qualities to prevent damage. Plus, they use corrosion-resistant brass inserts and stainless steel rotor springs to provide an unrestricted energy flow.
( 40 )
$26.55
$22.49
—
$23.90
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$23.99
—
$38.99
On Sale
These MSD replacement distributor reluctors will fit your MSD Pro-Billet Chevrolet distributors. They are made up of a special material to pick up the signal inside of the distributor. They come available for standard or marine-type distributors.
( 10 )
$46.10
$41.49
On Sale
Replace your worn out, damaged, or missing gear with one of these Crown Automotive distributor gears. They're made from quality materials and built to OEM specifications, ensuring a direct fit. Most of these kits include the distributor and camshaft gear, and are compatible with various Jeep models, in particular.
( 20 )
$22.99
—
$37.99
$20.69
—
$34.19
On Sale
MSD has the replacement distributor parts that you need. Don't replace a worn or broken part with another substandard piece. MSD is on the leading edge of production and design and they have one of the strongest reputations in the industry. Look to MSD for reliability, consistency, and the quality products that your ride deserves.
( 22 )
$65.35
$21.05
—
$39.04
On Sale
When you need to replace your worn-out or burned cables, MSD offers all of the cables you will ever need. You could also use these cables to connect your MSD unit to your distributor.
( 68 )
$29.83
Summit Bucks
ACDelco GM Genuine Parts distributor caps are a GM recommended replacement for your vehicles original component. These original equipment distributor caps have been manufactured to fit your GM vehicle, providing the same level of performance, durability, and service live you expect from General Motors.
( 34 )
$34.99
—
$48.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 113 )
$20.99
—
$39.50
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$46.09
$41.48
Fast HEI Distributor lockout kits allow you to lock the advance mechanism in your GM HEI distributor. By replacing parts designed for timing advancements as the engine speed increases on street cars, your racing engine (which spends little time at low rpms) will gain performance enhancement. Beat the competition with an assist from Fast HEI Distributor lockout kits.
( 8 )
$20.95
On Sale
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 151 )
$39.50
$21.05
—
$39.04
Mopar offers these distributor caps for a variety of applications. These sets are direct replacements for your stock distributor cap, and are designed to make your ignition perform like new again.
( 4 )
$32.79
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 25 )
$47.99
—
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
