Availability
Morimoto X3B LED third brake flash modules can be added to your X3B brake light setup to automatically pulse the brake light optics 3x before staying on when you step on the brake pedal. Though the standard optics and powerful 3W LEDs in the X3B brake lights are already highly visible day and night, the addition of this module makes sure that followers will notice when you step on the brakes. This feature has become standard on many of the most modern trucks and cars. The X3B Rapid Flash module is 100 percent plug-and-play with the Morimoto X3B brake lights and can be connected in seconds. It is not compatible with other aftermarket products or OEM units.
Not Yet Reviewed
$36.00
American Autowire memory retainer assemblies are an auto-resetting breaker that keeps your clock and tunes active, while still keeping the car from being started with the master disconnect switch off. Master disconnect switches are great for security, but you hate resetting your clock and radio presets every time you turn that switch. Creative car guys used to wire a low-amp fuse jumper to keep the basic systems on when the master disconnect switch was off, but every time you forget to switch it back to "on" before starting, the car the fuse would pop. These assemblies simply install between the two posts of the master disconnect switch to maintain the circuit for up to 2 amps continuous or 4 amps max load.
( 5 )
$32.30
—
$41.80
ARB LINX wiring harnesses are optional accessory wiring that will assist in integrating seamlessly with your vehicle and a LINX accesory interface.
Not Yet Reviewed
$33.95
These Standard Motor Products replacement coolant level sensors provide the PCM with an analog input signal, along with an oxygen sensor, to go into the closed loop mode of controlling the fuel mixture. They are designed to provide actual engine temperature information to the PCM. The PCM then feeds the sensors a fixed reference voltage of usually 5 volts when the engine is on. The resistance in the sensors is high when cold, and drops as the sensors warm up, to alter the voltage signal back to the PCM. Are you experiencing temperature problems with your vehicle? Try one of these Standard Motor Products replacement coolant level sensors to eliminate any chance of problems.
( 4 )
$28.99
Aeromotive VaporWorx GM fuel module plugs with wiring pigtails feature genuine Delphi connector, terminals, and seals with 12-gauge/20-gauge XLPE cross-linked insulated wiring. Each of the wires are 12 in. long.
Not Yet Reviewed
$30.75
MechMan indicator light module connectors are for use on GM vehicles with MechMan alternators and equipped with a 2-pin regulator and a RVC (Regulated Voltage Control) sensor. Simply plug module into your vehicle's factory harness and tie out of the way. This will eliminate the check charging system code (battery light). These are especially popular for the customer who wants to bypass the RVC system so that they can run a stand-alone alternator. The reason for this is that when run in the factory form on these model vehicles there will be fluctuating voltage and normally, they will charge at a lower voltage. Although this is all normal since the PCM is controlling the voltage in order to acquire max fuel economy, some will opt to go with a standalone unit to acquire a higher and more stable voltage.
Not Yet Reviewed
$29.99
Aeromotive VaporWorx fuel module plug kits are available for specific Ford and GM fuel modules, as well as other similar fuel pump modules. Each kit will be slightly different per application, featuring Delphi/Aptiv components for power and fuel level sensor (if the OEM fuel level sensor is used), and typically includes plug body, terminals, and seals. Wire is not included. Select the VaporWorx fuel module plug kit needed for your application. Note: When crimping wire to terminal, do not allow the end of the wire to extend past the end of the crimping wings. The terminal will not seal correctly if the stripped wire extends past the crimping zone.
Not Yet Reviewed
$25.45
—
$38.15
Caspers Electronics sealed 12 V to 5 V converter modules are designed to facilitate converting a 12 V feed into a 5 V output. They are especially useful when adding things like pressure transducers, MAP sensors, TPS sensors, or any other 5 V powered items to your existing wiring. They are completely sealed and weatherproof, and will allow for a 5 V feed without having to splice into any wires. Simply provide the modules with a switched 12 V feed and ground to give you 5 V out on the 3rd wire. Package includes: * Module * AT06-4S connector * Seal plug * Three 16-18AWG terminals * Instructions
Not Yet Reviewed
$38.99
Denali Electronics LED headlight module "All-On" adapters permit the use of low beam and high beams simultaneously. Exclusive to the Denali M5 and M7 LED headlight modules, the adapters offer simple plug-and-play installation "inline" between the modules and your motorcycle. Improve lighting on the sides of the road, directly in front of the motorcycle, and over 500 ft. down the road when your headlights are "All-On" with Denali adapters.
Not Yet Reviewed
$40.99
Diode Dynamics anti-flicker modules handle troublesome CANBUS systems used in the newest vehicles. They feature non-polar function, full power smoothing, and resistive and capacitive feedback to cancel the trickiest systems. These redesigned, modern versions of the old, generic "warning canceller" can be with 35 watt HIDs or any LED bulb to prevent flickering or bulb out errors in low beams, high beams, fog lamps, or daytime running lights. Diode Dynamics offers 9006, the most common size used and the universal size for HID ballasts, as well as other sizes for LED bulbs. Each delivers simple plug-and-play installation and are fully waterproof and shockproof. Choose one or a pair in the size you need. Fitments: * 9006 anti-flicker is compatible with 9012, 9005, H10, and 9145 size sockets * H11 anti-flicker is compatible with H8, H9, 880, and 881 size sockets * 5202 anti-flicker is compatible with H16 and PSX24W size sockets
Not Yet Reviewed
$49.95
United Pacific dual function LED control modules add more brightness and versatility to your headlamps with LED accent lights. These easy plug-and-play hookups will also add high/low functions so the accent lights can serve as auxiliary signal lights. You'll need one harness per headlamp. Get more from your headlamps with United Pacific dual function LED control modules.
( 3 )
$22.99
Digi-Tails taillight signal separator modules are for extracting brake and turn signals from a combined signal. These separator modules take two inputs: left brake/turn and right brake/turn—and have three outputs: brake, left turn, right turn. The module can be used with stock wiring to avoid running a brake wire from the brake light switch to the rear of vehicle, or from the turn signal switch to rear of the vehicle. Each output can handle the power required by multiple incandescent bulbs.
Not Yet Reviewed
$35.00
Dorman radiator fan control modules are direct replacements that restore cooling fan operation. They will allow the fan motor to have various speeds to provide the most efficient cooling at all engine operating conditions. The installation is an easy plug-and-play; plus, you can replace just the failed module and not the entire assembly, saving you money and time.
( 1 )
$38.99
ARC relay modules are available in 1 through 5-position units and should be used to purge or stage solenoid operations for fuel pumps. These modules feature a plug-in fuse and 40 amp relay, which can be operated by switching to 12 V or GND.
( 2 )
$38.99
HalTech offers a wide range of wiring components for automotive performance applications, including this Elite CAN adapter harness. HalTech Elite CAN cables are available in many lengths to connect DTM-4 to DTM-4, 8-pin Tyco, or OBDII, or a DTM4 receptacle to 16-pin Tyco. Choose the proper connectors and length needed.
Not Yet Reviewed
$47.00
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$48.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$20.99
—
$49.99
Oracle switchback turn signal Y-splitter adapters connect to your vehicle side plug and splits into two separate outputs. They offer plug-and-play connections for an easy installation. Split the output of your front grille turn signal/parking light circuit for additional devices with Oracle switchback Y-splitter adapters.
( 2 )
$23.85
If you're in need of a replacement relay, Dorman relays are a perfect choice. They are constructed of high-quality materials for long-lasting durability and made to exceed OEM specifications for accurate and maintenance-free operation. Dorman offers a comprehensive line of relay connectors for a wide range of applications.
( 8 )
$47.79
Dorman wiring connectors are designed to facilitate the flow of electrical current over a broad range of applications. The small components are available in a variety of styles to fit your specific application or universal fit needs. Choose Dorman wiring connectors for a reliable connection every time.
( 61 )
$21.99
—
$35.99
Davis Unified Ignition offers distributor wiring harnesses to keep the power flowing from your HEI distributor. These quality replacements are assembled with connectors. Service your ignition system with D.U.I. components.
Not Yet Reviewed
$44.99
ICT Billet has your engine swap covered with their ECM wiring connector kits. These terminals, retainers, and connectors are all designed to work with OE sensors and factory connectors for the easiest installation possible! This is one area that you don't want to use poor quality components—which are subject to crimps, twisting, and unseated terminals. If the wiring has conductivity issues, your engine will run poorly, and the problem is hard to diagnose. ICT Billet has built its reputation on dependable, high-quality parts. Order the kit preferred for your application.
Not Yet Reviewed
$21.99
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 26 )
$24.70
—
$33.25
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 60 )
$26.99
—
$38.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
