Availability
Showing In Stock Items. Show All 21 Items.
On Sale
Painless Performance manifold heater relays help the manifold heater to vaporize fuel in the intake manifold when the engine is cold. This will help with cold starts and idling until the engine is up to operating temperature. This kit allows a manifold heater to be used if you are rewiring your Jeep using a Painless chassis harness, using a later style manifold on an older Jeep, or if the factory relay was cut from your Jeep at some point in time by you or a previous owner.
( 1 )
$39.99
$35.99
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 61 )
$28.99
On Sale
These FAN-THOM II electric fan relay kits come with a threaded thermostat that screws into the engine block or intake manifold for a clean and professional look. These kits provide protection for your electric fans and wire harnesses. They supply constant voltage, protect against voltage and amperage spikes, and prevent the fan from back-feeding voltage through your vehicle's wire harnesses. These kits include: * SPST 40 amp relay * 30 amp circuit breaker * Thermostatic switch * Relay base with harness * Crimp-on terminals * Mounting hardware
( 77 )
$46.99
$42.29
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
When you need to replace or repair electrical connectors on your vehicle, Standard Motor pigtails are a great choice. Standard offers pigtails for everything from your alternator and manifold air temperature sensor … to headlight switches and window motors. These factory-type replacement assemblies are available for thousands of specific applications. Choose the Standard Motor parts needed for your make/model.
( 4 )
$23.99
—
$33.99
FAST wiring harness adapter pigtails (P/N 308031) adapt an older TPI/MAP sensor to a modern connection, such as a Metripack/LS-style harness. The sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. The MAP sensors relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy.
( 4 )
$23.95
ICT Billet LS3 MAP sensor connector component kits are compatible with 2009-and newer GM LS Gen 4 Series engines - "Bosch" style sensors. They replace broken, worn-out, or missing harness connectors for the MAP sensor. Kits include connector, retainer, terminals, and seals. * Compatible with 3-wire Gen 4 LS3 "Bosch" style, bolt-down sensors * Not compatible with LS Gen 3 clip-in sensors or "Brick" style sensors
Not Yet Reviewed
$22.99
Summit Bucks
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 37 )
$25.99
—
$39.99
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 11 )
$22.99
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 3 )
$21.99
—
$29.99
On Sale
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$22.99
—
$25.99
ICT Billet has your engine swap covered with their ECM wiring connector kits. These terminals, retainers, and connectors are all designed to work with OE sensors and factory connectors for the easiest installation possible! This is one area that you don't want to use poor quality components—which are subject to crimps, twisting, and unseated terminals. If the wiring has conductivity issues, your engine will run poorly, and the problem is hard to diagnose. ICT Billet has built its reputation on dependable, high-quality parts. Order the kit preferred for your application.
Not Yet Reviewed
$22.99
On Sale
Holley wiring harness connectors provide one-stop shopping for your wiring needs. Along with their extensive line of wiring components, Holley offers a tremendous assortment of genuine OEM connectors to hook up your wiring project properly, securely, and completely. They're available individually and in packs of 10—with most including pins, seals, and TPA. Finish wiring your Holley-powered machine with their quality wiring harness connectors.
( 9 )
$49.95
Electrical connections keep your vehicle moving forward—and all accessories operating smoothly. When a switch fails, you've got problems. Pioneer offers a variety of replacement switches for various functions and applications. These direct-fit units will restore the performance you need.
Not Yet Reviewed
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
