Availability
Showing In Stock Items. Show All 25 Items.
On Sale
These Taylor 2-post battery disconnect switches positively shut off all of the current from the batteries in the event of a short or an accident. They meet NHRA safety requirement rule 8:4 for power cut-off switches. The Taylor 2-post battery disconnect switches are especially useful when charging and include a vinyl decal.
( 21 )
$48.80
—
$59.80
$41.65
—
$53.82
On Sale
MSD Ignition waterproof relay harnesses are ideal for use on electric fuel pumps, water pumps, cooling fans, off-road lights, and any other application that is exposed to muddy or wet conditions. Each is built with rugged connectors and pigtail harness with long leads and heavy-duty gauge wire. The connectors have wires molded in rubber and a gasket for a leak-proof seal. Features: * Waterproof relay with pigtail harness and sealed connector * Metal bracket for mounting underhood or just about any other location * Ideal for marine, dirt track cars, and off-road trucks and Jeeps * Works in normally open or normally closed circuits
( 10 )
$34.17
$22.21
On Sale
PerTronix power relays enable maximum ignition performance! Adding or upgrading to Ignitor electronic ignition systems requires a full +12 V power connection, which means bypassing the OE resistance wire. So, where is it? Buried! Having PerTronix power relays means that you won't have to dig through the wiring harness and replace wires any longer. These universal-designed relays work with most battery ignition systems, and they're compact, so your engine bay will look the same. They'll minimize conducted voltage spikes by isolating the ignition power source from other high-current equipment. They'll also provide consistent full-battery voltage and eliminate problems from worn-out and corroded ignition switches, connectors, and wires. Get the most from your Ignitor ignition systems with easy-to-install power relays.
( 26 )
$49.30
$44.37
On Sale
Silver Sport wire connectors are available in different pigtail versions to complete wiring of your transmission. These SST OEM-quality connectors will restore and maintain proper working order of your transmission's reverse lights, speed sensors, and lockouts with a simple splice and plug-and-play.
( 5 )
$24.95
$22.46
On Sale
Taylor 4-post battery disconnect switches positively shut off all of the current from the batteries in the event of a short or an accident. They feature two additional terminals for other hookups, and meet NHRA safety requirement rule 8:4 for power cutoff switches.
( 5 )
$50.90
$45.81
On Sale
Shafer's Classic Reproductions ground strap kits will properly ground your automotive electrical system. Their selection features strong copper woven straps, and the kits include fasteners. Get your classic vehicle grounded with one of Shafer's strap kits.
( 3 )
$29.99
$26.99
On Sale
Aeromotive VaporWorx GM fuel module plugs with wiring pigtails feature genuine Delphi connector, terminals, and seals with 12-gauge/20-gauge XLPE cross-linked insulated wiring. Each of the wires are 12 in. long.
Not Yet Reviewed
$30.75
$27.68
On Sale
Don't take chances with old, questionable, or faulty turn signal switches that can be a danger to you and others. Scott Drake replacement turn signal indicator switches are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These units include wiring and are available for a variety of classic makes and models. Trust your vehicle's electrical system needs to Scott Drake.
( 89 )
$92.35
$50.79
On Sale
You already have the wire and Holley EFI ECU connector kits have the rest of what you need to rewire your EFI installation. Fully terminate your own custom main harness with Holly EFI ECU connector kits. Features include: * Pre-terminated J1A/J1B Tyco Superseal connectors * 20 to 22 gauge pre-terminated wires * 16 to 18 gauge pre-terminated wires * Cavity plugs
( 4 )
$52.69
$28.98
On Sale
SCT X4 OBD II cables will keep you connected to your vehicle. The cable that came with your X4 is missing, or maybe it's damaged. No problem--SCT has HDMI/OBD II replacements that will once again allow you to easily and quickly install your X4 to the port on your vehicle. Power up your device with genuine SCT Performance X4 OBD II cables.
Not Yet Reviewed
$28.99
$26.09
On Sale
PerTronix dual wall heat shrink tube kits contain waterproof sleeves in a variety of lengths, diameters, and colors. Their adhesive-lined inner wall seals and protects against moisture and corrosion. The polyolefin tubing is easy to shrink with a heat gun. Add a layer of insulation and protection for your wiring connections and other components. Additional product details: * Temperature rated at -49 degrees to 257 degrees F * Shrink temperature: Start at 158 degrees F; completely shrunk at 248 degrees F * Shrink ratio 3:1 * Max electrical rating: 600 V
Not Yet Reviewed
$33.60
$30.24
On Sale
Mr. Gasket weatherproof connector kits contain an assortment of wiring components that are ideal for all high performance and racing wiring applications. The high-quality connectors and seals provide a reliable, OE-style wiring connection. These 232-piece kits offer a selection of 14 connectors with 1 to 4 terminals per connector, and crimp terminals and seals that work with 12-20 gauge wire. The connectors are compatible with those on most high performance electrical components (i.e. MSD Distributors, Holley distributors, EFI Systems, and many OE sensors and components). A plastic storage case keeps everything organized. What's in the box: * (5) 1-pin connectors (male and female) * (3) 2-pin Connectors (male and female) * (4) 3-pin connectors (male and female) * (2) 4-pin square connectors (male and female) * (2) 4-pin flat connectors (male and female) * (120) crimp terminals—male and female for 12-20 gauge wire * (80) seals for 12-20 gauge wire * Plastic storage case
( 1 )
$95.85
$52.72
On Sale
Doug's Headers electric cutout replacement wiring harnesses are pre-wired harnesses with an illuminated rocker switch supplied for easy installation. Un-cork your exhaust with the flip of a switch from your dash. Features include: * Electric exhaust cutouts are available in various diameters * Stainless steel construction * Rugged gear reduction 12 V DC motor and rotating gate for a leak-proof seal every time the cutout is opened and closed * Ideal for race tracks that don't require mufflers * No leaky gasket sound; no exhaust flow obstructions when fully opened
Not Yet Reviewed
$55.65
$50.08
On Sale
Proper wiring allows for proper operation. Maradyne heater switch kits are the appropriate wiring kits for your Maradyne heaters. They offer the switch kits alone or with wire harnesses. The kits include the switch, switch plate, control knob, and nuts; the complete kits also include a wire harness, insulated terminal ends, and tie wraps. Select the correct heater switch kit from Maradyne.
( 2 )
$51.93
$46.74
On Sale
Aeromotive VaporWorx fuel module plug kits are available for specific Ford and GM fuel modules, as well as other similar fuel pump modules. Each kit will be slightly different per application, featuring Delphi/Aptiv components for power and fuel level sensor (if the OEM fuel level sensor is used), and typically includes plug body, terminals, and seals. Wire is not included. Select the VaporWorx fuel module plug kit needed for your application. Note: When crimping wire to terminal, do not allow the end of the wire to extend past the end of the crimping wings. The terminal will not seal correctly if the stripped wire extends past the crimping zone.
( 1 )
$25.45
—
$38.15
$22.90
—
$34.34
On Sale
Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!
Not Yet Reviewed
$89.95
$49.47
On Sale
Maradyne 3-position switches are modern-style units for 2-speed (high-low) Durango and Havasu auxiliary heaters. They will work with any 2-speed heater and are designed for dash or wall mounting. Maradyne 3-position switches include switch, knob, and bezel.
( 1 )
$26.99
$24.29
On Sale
Maradyne 4-position switches are modern-style units for 3-speed (high-medium-low) Maradyne Stoker and Heat 5000 auxiliary heaters. They will work with any 3-speed heater and are designed for dash or wall mounting. Maradyne 4-position switches include switch, knob, and bezel.
( 1 )
$26.43
$23.79
On Sale
These Taylor waterproof sealed switches are a must for any type of racing where switches may be exposed to moisture and dust. These switches have internal O-rings and plasticized bodies to protect against moisture, dust, and vibration.
( 1 )
$40.20
$36.18
On Sale
PerTronix terminal kits include high-quality electrical connectors to help complete each circuit securely. Available for different applications, each terminal kit provides you with a variety of different components to make sure each electrical job is finished with the correct connection. Order the PerTronix terminal kit that is best suited to fit your specific project needs.
( 1 )
$34.15
$30.74
On Sale
HV (high-voltage) contactors are widely used in electric vehicles (EV) and hybrid electric vehicles (HEV). AEM Electronics offers a couple of choices in this area with their Rincon Power high-voltage contactors. One is a low-cost, pre-charge solution that meets RoHS 2011/65/EU and is PCB (printed circuit board) mountable. The other is hermetically sealed with gas fill and has an integrated coil economizer to reduce coil holding power. It meets RoHS 2011/65/EU, is CE certified, and IEC60947-4-1 compliant. Choose the one needed for your application.
Not Yet Reviewed
$56.65
$31.16
On Sale
AEM Electronics' CCU AC input connector plug and pin kits are the replacement connectors for their EV combined charging units. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV CCU with their plug and pin kits.
Not Yet Reviewed
$59.89
$32.94
On Sale
AEM Electronics' CCU HVDC output connector plug and pin kits are the replacement connectors for their EV combined charging units. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV CCU with their plug and pin kits.
Not Yet Reviewed
$76.25
$41.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
