Availability
Showing In Stock Items. Show All 33 Items.
On Sale
Try a completely modular battery amperage management system--i-BAR battery terminal adapters from XS Power. i-BAR adapters allow you to fit your XS Power battery to several applications, creating SAE posts for your domestic or import, GM side posts, a combination of both, or marine applications! These integrated battery amperage rails are great for car audio enthusiasts, allowing you to create a system for multiple connections, with as many as four top posts with side terminals. Compatible with all XS Power batteries (some may require additional adapters), i-BAR battery terminal adapters from XS Power are a clean, easy way to add multiple cables and power up your ride.
( 32 )
$22.49
—
$54.99
$20.24
—
$50.59
On Sale
These Taylor 2-post battery disconnect switches positively shut off all of the current from the batteries in the event of a short or an accident. They meet NHRA safety requirement rule 8:4 for power cut-off switches. The Taylor 2-post battery disconnect switches are especially useful when charging and include a vinyl decal.
( 22 )
$48.80
—
$59.80
$43.92
—
$53.82
On Sale
These Painless Performance remote battery junction terminal kits are a safe and convenient way to create attaching points for the firewall or trunk. They include one red positive and one black negative terminal block with 3/8 in. studs to allow for the connection of battery cables through a bulkhead.
( 14 )
$44.99
$40.49
On Sale
Mount XS Power battery terminal adapters to get things started. They offer several styles of battery post and stud adapters to fit your vehicle or boat XS Power battery. Brass short and tall style post adapters with M6 threads, zinc plated adapters, and brass stud adapters with stainless wingnuts are ready to work with most of their deep-cycle batteries. Order the style best suited for your application. Get the juice flowing in your land or water machine with battery terminal adapters from XS Power.
( 46 )
$44.99
—
$54.99
$40.49
—
$50.59
On Sale
Keep your XS Power battery in place with their line of XS Power battery mounts. These hold-downs feature lightweight aluminum construction for durability. The mounts are available in a variety of styles to accommodate numerous XS Power battery models.
( 4 )
$54.99
$49.49
—
$50.59
On Sale
Taylor 4-post battery disconnect switches positively shut off all of the current from the batteries in the event of a short or an accident. They feature two additional terminals for other hookups, and meet NHRA safety requirement rule 8:4 for power cutoff switches.
( 5 )
$50.90
$45.81
On Sale
Trail-Gear battery boxes will keep your battery in place, even on the toughest rocks and trails. They're offered in single or dual configurations, shipped unfinished, and can either be welded or bolted into place. TG battery boxes are made from steel—and once they've been installed, you simply remove three bolts to lift the top off for easy battery replacement. Mounting options include where your OEM battery was or behind your seat/cab, depending on application. An unsecured battery can lead to sparks, burn marks, fire, etc. Avoid those issues with a Trail-Gear battery box, available for a variety of sizes and styles.
( 56 )
$49.99
$42.49
On Sale
Crown Automotive battery trays make the perfect replacement for your rusted, deteriorated stock original. Manufactured from sturdy materials, these battery trays help to eliminate battery shifting and movement.
( 9 )
$22.99
—
$46.99
$20.69
—
$42.29
On Sale
Taylor brass compression battery cable terminal kits are designed for a fast and easy install. Simply strip your battery cable, apply the fitting, and screw it into the battery terminal. These brass terminals and compression fittings are cadmium plated for corrosion resistance.
( 46 )
$28.10
—
$40.20
$25.29
—
$36.18
On Sale
Crown Automotive offers battery hold-down bracket kits for a variety of applications, including many Jeep models from the 1980s, '90s, and 2000s. Each kit includes bracket, rods, and nuts. The components are machined from steel with a protective black coating. They're made in accordance with factory specifications to ensure proper fitment and long-lasting performance. These replacements meet or exceed OE quality standards.
Not Yet Reviewed
$36.99
$33.29
On Sale
RT Off-Road battery trays feature corrosion-resistant stainless steel construction, offering an optimal fit, function, and finish for your Jeep. RT Off-Road provides different tray options that use existing hardware or in a kit with clamp and bolt. Select the option you prefer.
Not Yet Reviewed
$56.99
$51.29
On Sale
These Scott Drake battery hold-down J-bolt kits include the correct length J-bolts and nuts to properly hold the battery down in place. They are available in your choice of standard steel or durable stainless steel.
( 30 )
$23.75
$21.38
On Sale
Racing Automotive Group remote battery jumper terminals come together as a pair and are red and black, meant to be used as the positive (+) and negative (-) connection for charging the battery. These posts provide remote access to the battery for charging when installed and wired correctly. They have insulated covers to prevent accidental contact from parts with opposing polarity. (Note: Charging posts may require drilling 1 1/4 in. holes for installation and accept 3/8 in. ring terminals for wiring. Additional mounting brackets are sold separately.)
Not Yet Reviewed
$39.99
$35.99
On Sale
Master disconnect switches from Painless Performance allow you to easily disconnect your battery with a flip of the switch. They're available with or without a mounting panel.
( 14 )
$44.99
$40.49
On Sale
Painless Performance 8-point distribution blocks are used anywhere power or ground distribution is necessary. These blocks offer a place for common grounding points and a common place to source power. Painless 8-point distribution blocks feature one main stud that makes it easy to supply power or ground directly to the block. They have eight screws positioned around the stud, making it easy to redirect the main source to components on your chassis harness. The blocks come with either a 3/8 in. main stud (red) or 5/16 in. main stud (black), plus self-tapping mounting screws are provided with each kit. You'll have no more worrying about overloading battery terminals with numerous feeds to different components with these distribution blocks from Painless Performance--the people who make wiring your project... well, painless!
( 59 )
$34.99
$31.49
On Sale
PerTronix power relays enable maximum ignition performance! Adding or upgrading to Ignitor electronic ignition systems requires a full +12 V power connection, which means bypassing the OE resistance wire. So, where is it? Buried! Having PerTronix power relays means that you won't have to dig through the wiring harness and replace wires any longer. These universal-designed relays work with most battery ignition systems, and they're compact, so your engine bay will look the same. They'll minimize conducted voltage spikes by isolating the ignition power source from other high-current equipment. They'll also provide consistent full-battery voltage and eliminate problems from worn-out and corroded ignition switches, connectors, and wires. Get the most from your Ignitor ignition systems with easy-to-install power relays.
( 27 )
$49.30
$44.37
On Sale
Made from high-grade copper and covered in a special heat-shrink that won't crack under high temperatures, these 67-piece wiring connector assortments exceed all UL and CSA requirements. The terminals feature built-in heat-activated adhesives to waterproof the connection and relieve wire strain—and they're completely impervious to gas, antifreeze, battery acid, diesel fuel, and saltwater. * Easy crimp-on style * For extreme conditions * Solderless wiring terminal assortment
( 4 )
$29.99
$26.99
On Sale
MechMan indicator light module connectors are for use on GM vehicles with MechMan alternators and equipped with a 2-pin regulator and a RVC (Regulated Voltage Control) sensor. Simply plug module into your vehicle's factory harness and tie out of the way. This will eliminate the check charging system code (battery light). These are especially popular for the customer who wants to bypass the RVC system so that they can run a stand-alone alternator. The reason for this is that when run in the factory form on these model vehicles there will be fluctuating voltage and normally, they will charge at a lower voltage. Although this is all normal since the PCM is controlling the voltage in order to acquire max fuel economy, some will opt to go with a standalone unit to acquire a higher and more stable voltage.
Not Yet Reviewed
$29.99
$25.49
On Sale
Quadboss bus bars alleviate multiple connections to battery terminals by allowing you to connect various power accessories. They have bases made of flame-retardant ABS plastic and bus material of tin-plated solid copper for maximum conductivity and resistance to corrosion. Features include: * Electrical power distribution (conducts electricity) * Stud design provides direct terminal-to-bus contact for low-resistant connection * Stainless steel studs allow high-torqueing for excellent electrical contact * Continuous amperage of 130 amps AC, 150 amps DC * Maximum voltage rating 300 V AC, 48 V DC
( 1 )
$24.24
$21.82
On Sale
MechMan indicator light harnesses prevent the "check battery" light from coming on in the dash. Offered individually as well as supplied with all MechMan hairpin alternators for a range of GM trucks and SUVs, they accept oval GM alternator plugs. The longer blue wire gets connected to an ignition switched 12 V+ source to turn the alternator on and off with ignition and prevent the indicator light from coming on. MechMan harnesses can also be modified and hardwired to ignition 12 V+ for engine swap applications where the stock alternator harness is not available.
Not Yet Reviewed
$29.00
$24.65
On Sale
Morimoto HD relay harnesses are your ultimate solution for a flawless HID lighting upgrade. Tired of flickering headlights? These relay harnesses ensure a steady voltage supply directly from your car battery to HID ballasts, eliminating those annoying distractions. Designed with precision, each harness guarantees longevity and performance, preventing any compromises. Their plug-and-play setup, industry-standard compatibility, and fail-safe design make installation a breeze. Note: One harness controls both headlights. Features and benefits: * Steady illumination: Delivering consistent voltage for flicker-free HID lighting * Enhanced performance: Outperforms halogen bulbs with powerful HID illumination * Plug-and-play: Easy installation with user-friendly design for enthusiasts and beginners * Fail-safe design: Individual relays per side prevent complete headlight failure * Universal compatibility: Compatible with various vehicle lights—low beams, high beams, and fog lights
Not Yet Reviewed
$50.00
$40.00
On Sale
Irregular sparks emitting from your plugs could be a sign of ignition coils failing. Crown Automotive replacement ignition coils can end your stalling, starting, or misfiring issues. Your ignition parts are subjected to a lot of wear and tear, thanks to the intense electricity passing through them. If broken coils are not replaced, it can cause long-term damage to your car's engine and exhaust systems. Replacement components from Crown will boost your battery power and give you enough voltage to activate spark and keep your motor running.
( 5 )
$22.99
—
$52.99
$20.69
—
$47.69
On Sale
To power your off-road LED lighting, you will need a wiring harness to connect to your vehicle's battery. Diode Dynamics offers many different off-road light wiring harnesses designed for use with their Stage Series/SS Series light bars and pods. Stage Series lights without backlight functionality use a 2-pin harness, while lights with a backlight will use a 4-pin wiring harness. The harnesses connect directly to your vehicle's battery and allow you to power your off-road lighting. Each harness has a switch and uses high-capacity wiring, along with Deutsch DT connector(s) for simple plug-and-play installation. A waterproof fuse is included to safeguard the electrical systems in your light. Heavy-duty harnesses also include relay and an OEM auxiliary switch adapter to control lights for vehicles with a factory-installed Auxiliary Switch Bank. Set the "Stage" with the appropriate off-road lighting harnesses from Diode Dynamics.
Not Yet Reviewed
$39.95
—
$59.95
$31.96
—
$47.96
On Sale
When you need a solid connection between your battery and the starter, Quadboss starter solenoids give you a reliable switch that will be there for many riding days. Nothing is worse than having perfect riding weather and your quad won't start. You have checked the battery, and it's still good, so now you want to make sure that you have a good starter solenoid. They have models designed to your manufacturer's OEM specs, so there's no need for modifications for the install.
Not Yet Reviewed
$26.18
—
$51.40
$23.56
—
$46.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
