Availability
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,749.95
—
$1,999.95
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$1,999.95
DIYAutoTune MegaSquirt MS3Pro EVO standalone engine management systems are scaled up, more capable units due to the shared technology with their big brother, MS3Pro Ultimate. EVO ECUs by AMP EFI do not have peak and hold injector drivers, but they do share some increased I/O, an onboard 4-bar MAP, barometric pressure sensor, and 5 diagnostic LEDs. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro EVO ECUs will deliver winning control. MS3Pro EVO ECUs feature configurable inputs/outputs: * 10 high-impedance injector outputs * 8 logic level spark outputs * 3 PWM outputs * 2 digital outputs * 7 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro EVO standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$1,899.99
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$2,099.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
