Filters
HalTech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a HalTech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a HalTech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors
Not Yet Reviewed
$1,995.00
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,579.95
—
$1,929.95
The new Racepak V300SD Easy Access Data Loggers include all the features and benefits of their successors, but now also include built-in pre-configured data analysis channels, enabling you to make quick decisions based on real data between rounds at the track. Equipped with a door car harness, these units are commonly used for Pro Stock, Pro Modified, Sportsman drag classes, and Land Speed. They come with DataLink software. Easy Access loggers no longer require the use of a security key, allowing you to look at your data with any laptop that has the latest version of Datalink V5 installed. * Out-of-the-Box, this system will data log: - Engine RPM - Drive Shaft RPM (Requires driveshaft collar, sold separately) - Accelerometer G-Meter - Lateral G-Meter - Battery Voltage * List of pre-configured data analysis math channels included in the DataLink V5 software: - Engine vs. Driveshaft Ratio - Clutch percentage slip - Clutch Slip Ratio - Trans Ratio - RR, LR, RF, LF Shock Velocity - Average Air/Fuel Ratio - Average Exhaust Gas Temperatures - CC's Per Turn (for Fuel Flow) - Track Time - G-Meter MPH, G-Meter Distance (Feet) - 60 ft., 330 ft., 660 ft., 1000 ft., 1320 ft. Clock Markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch Percentage Slip, Trans Ratio, Shock Velocity, Average AFR (Air/Fuel Ratio), Average EGT (Exhaust Gas Temperature), G-Meter MPH, and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 Hard-wired Analog; 4 Hard-wired Digital; and 3 Internal Sensors (Battery Voltage, Accel/Decel G-Meter, and Lateral G-Meter)
Not Yet Reviewed
$2,110.95
Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware
( 1 )
$1,578.95
The next evolution of Racepak display has arrived. Building on the foundation of the legendary Racepak displays that came before, the new 12.3 in. dash offers unparalleled customization and visibility. The high-resolution, high-brightness, high-contrast, and full-color capacitive touch screen lets you see your Racepak data like never before. Swipe through a variety of multi-purpose layouts on-the-fly! You can use one of the eight pre-configured screen layouts or build your own. Product features: * Plug-and-play support for all Racepak VNet loggers and devices, such as the V300SD, Sportsman, and G2X PRO * Capable of monitoring any VNET channel being broadcast from your Racepack datalogger or device * Dedicated CAN connection for Holley EFI (build V4 100 and newer) * 8 default background skins pre-loaded with unlimited options for importing custom layouts * User definable channel alarms and warnings can be used for oil pressure, AFR, or any other channel on your VNET stream * Quickly swipe between multiple active screens for warmup, race, or whatever you want to monitor * No stylus required, capacitive touch, just like your smart phone * Weatherproof aluminum housing featuring flexible mounting options * Manual or auto-brightness features for easy viewing day or night * Built-in GPS with odometer function (antenna included) * Expandable storage via USB (16GB memory stick included) * 6x 1/4 in.-28 mounting holes for surface or flush mounting, with high-quality hardware included * Includes everything needed for installation * USB keyboard and mouse functionality makes it quick and easy to setup new layouts * Upgradable with future software enhancements
Not Yet Reviewed
$1,999.95
Take control of your exhaust temperatures using one of these Racepak four channel air fuel controllers. They are available for either the left or right side of the engine and feature easy plug-in connections. Sensors sold separately.
Not Yet Reviewed
$1,636.95
Racepak IQ3 data recorders represent an entirely new concept in data logging dashes. By placing the 32-channel data logger, 512 MB memory card, GPS board, and 3-axis G-meter inside the dash, every feature of the data system is now located in one central location. This means that only one small cable will transmit the data from all the sensors to the rear of the dash. This eliminates the need for a sensor harness, greatly reducing installation time, complexity and overall weight. The programmable shift lights are protected from sunlight by a molded shield above the lights, while the low-glare LCD display is well recessed in the housing to provide viewing in all light conditions. The rear of the dash contains the connectors for the external GPS antenna and V-Net sensor cable—plus the power, ground, and engine rpm external programming button harnesses. All data is stored in a MicroSD memory card located in the front of the dash between the programmable shift lights. This design insures easy access to the memory card for data download.
( 1 )
$2,322.95
The new Racepak V300SD Serialized Data Loggers include all of the features and benefits of their predecessors, but now also include built-in pre-configured data analysis channels—allowing you to make quick decisions based on real data between rounds at the track. The new secured loggers protect your vital system data with a serialization number that is unique for each individual logger. This feature also allows you to quickly organize logs between rounds. V300SD units are commonly used for Pro Stock, Pro Modified, Sportsman drag race classes, and Land Speed. DataLink software is included. Kits are available for car doors, dragsters, motorcycles, or with universal 20 ft. harness. * Out-of-the-Box, this system will data log: -- Engine RPM -- Driveshaft RPM (requires driveshaft collar sold separately) -- Accelerometer G-Meter -- Lateral G-Meter -- Battery voltage * List of pre-configured data analysis math channels are included in the DataLink V5 software: -- Engine vs. driveshaft ratio -- Clutch percentage slip -- Clutch slip ratio -- Trans ratio -- RR, LR, RF, LF shock velocity -- Average air/fuel ratio -- Average exhaust gas temperatures -- CC's per turn (for fuel flow) -- Track time -- G-Meter MPH, G-Meter distance (feet) -- 60 ft., 330 ft., 660 ft., 1,000 ft., 1,320 ft. clock markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch percentage slip, trans ratio, shock velocity, average AFR (air/fuel ratio), average EGT (exhaust gas temperature), G-Meter MPH—and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 hard-wired analog; 4 hard-wired digital; and 3 internal sensors (battery voltage, accel/decel G-Meter, and lateral G-Meter)
Not Yet Reviewed
$2,193.95
AiM Sports MXG 1.2 Strada digital displays bring full color and ease-of-viewing for all your critical vehicle data. Constructed from high-quality materials and finished to the most stringent standards, these digital displays put everything you need to know about your ride all in one place. Customizable displays, easy plug-and-play compatibility, and multi-system management set this display apart from the competition. Order the model with options you prefer. Features include: * High-contrast 7 in. TFT color display * Customizable gauges/display configuration * CAN system expandable for add-ons such as SmartyCam, LCU-One, TC hubs, GPS and more * 10 total digital and analog inputs * Direct compatibility with more than 1,000 ECUs * Integrated shift light array * Programmable alarms and warning LEDs
Not Yet Reviewed
$1,599.00
Racepak IQ3SL Street Logger dash recorders add data-logging to the popular IQ3S Street display dash. These add-on data acquisition accessories make an ideal solution for vehicles that need full road instrumentation, as well as the ability to record data—combining all functions into one easy-to-use unit! Standard data—such as speed, odometer, turn signals, hi/low beam and parking brake indicators—are displayed, along with programmable shift and warning lights. In addition, these dash recorders feature internal processing to read data from OBDII and most aftermarket ECU and EFI systems. This makes the IQ3SL Street Logger a great option for modern cars or vehicles with modern EFI engine swaps. Racepak IQ3SL Street Logger dash recorder features include: * Displays standard road functions * User-defined shift light output * Displays up to 28 inputs via four page * Shielded, low-luster display for better sunlight viewing * Blue dimmable backlight * Metric and English capable * Gear Indicator * CAN-based and OBDII compatible (adapter cables available) * Four user-defined alarms * Connects to any Racepak V-Net data logger * User-defined 5-character sensor input names * Optional GPS module for speed
Not Yet Reviewed
$2,241.95
Summit Racing™ data acquisition kit and dash panel Pro Packs provide reliable, efficient, and affordable performance for today's professional and sportsman racers alike! These kits pair up a dash panel designed for perfect fitment in your specific vehicle, together with a cutting-edge digital gauge unit that monitors up to dozens of automotive parameters. Some models feature Racepak instrumentation, and others include interactive Holley controls. Order the Pro Pack assembled for your application.
Not Yet Reviewed
$1,636.90
—
$1,826.90
HalTech offers a variety of data acquisition components and digital dashboard displays, including the iC-7 Stand-Alone Classic Kit. With a crisp, clear and full-color display, the iC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading options in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current HalTech ECUs via a CAN network. * Ideal replacement for individual analogue gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via HalTech iC-7 software and USB cable * Quick and easy installation into a Non-EFI vehicle * Coolant Temp Sensor - 1/8 NPT thread * Adapter - Brass 1/8 in. NPTF to 3/8 in. NPTF * Suits: Perfect for old-school hot rods, mechanically injected muscle, carbureted classics and everything in between, the HalTech stand-alone IC-7 Classic kit is ideal for anyone looking to simplify and modernize their analog gauge setup. Suits carbureted or mechanically injected vehicles and/or vehicles without an ECU. * Includes: 1 x HalTech iC-7 Dash. 1 x iC-7 Semi Terminated Harness. 1 x 1/8 NPT Coolant Temperature Sensor. 2 x 0-150 Psi Fuel/Oil Pressure Sensors. 1 x 3/8 NPTF to 1/8 NPTF Adapter.
Not Yet Reviewed
$1,875.00
Computech custom 8-cylinder thermocouple kits come with your choice of either weld-in or clamp-on EGT probes. The EGT probes are 3/16 in. and can stand up to the most extreme temperatures. Your custom 8-cylinder thermocouple kits are available in either the Chevy (1, 3, 5, 7) and (2, 4, 6, 8) configuration or Ford (1, 2, 3, 4) and (5, 6, 7, 8) configuration. Each EGT probe has a custom-length lead, allowing the probes to plug in cleanly to the EGT modules. These Computech custom 8-cylinder thermocouple kits allow for the removal of the headers without having to take out the thermocouple sensors or un-wire.
Not Yet Reviewed
$1,599.95
Racepak LDX Logger dash data recorders combine data acquisition with Racepak's advanced instrumentation! They also take full advantage of the capabilities of V-Net technology. In addition to the wiring harness that imports signals from the engine rpm, drive-shaft rpm, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button, you can view the displayed functions by scrolling through four separate screen pages on the dash. Each page contains five user-programmable digital displays, plus the constant engine rpm bar graph. Selecting which functions will appear on each page is done through your Racepak Datalink software. The dash features output ports to connect a shift light and an external warning light. Shift points can be programmed using the screen of the dash or your software. You're also able to assign limits for the warning lights and the parameters for the dash-mounted mode buttons. Minimum and maximum levels that were attained during a recording can also be displayed. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through an included 6 ft. serial cable. The screen is backlit for nighttime use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.
Not Yet Reviewed
$2,322.95
AiM Sports GS-Dash module displays are designed to show data sampled by the new generation of AiM loggers, EVO4S and EVO5; all data coming from your vehicle ECU, from the GPS, and from your sensors, as well as from the inertial platform. In their compact structure, the GS-Dash displays feature a wide 268 x 128 pixel display to maximize readability, and the screens can be backlit in one of many available colors. They feature incorporated light sensors that make brightness and contrast perfect in all light conditions. Additional details: * Totally in aluminum, with edge-to-edge glass and metallic push-buttons * Compact design makes the module suitable for small cockpit installation (i.e. bikes, formula cars) * Durable, water-resistant chassis * GS-Dash swaps among pages showing lap times and data: just choose data and create your pages * RPM and Lap Time page layout: displays RPM graph, lap time and three channels of your choice * Fully configurable shift lights allow you to choose color and value thresholds for their activation (can also be configured to show your best lap/split time or monitor rpm level) * Fully configurable alarm LEDs allow you to choose situation that generates the alarm, the LED behavior (blinking frequency and color) when alarm appears, and conditions for its switch-off * Key-data summary available at the end of each session: three best laps with the times, min/max speed and min/max rpms * Not compatible with the EVO4 AiM logger model
Not Yet Reviewed
$1,599.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
