Availability
Showing In Stock Items. Show All 9 Items.
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$1,599.95
Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware
( 1 )
$1,699.95
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$1,699.95
Racepak IQ3SL Street Logger dash recorders add data-logging to the popular IQ3S Street display dash. These add-on data acquisition accessories make an ideal solution for vehicles that need full road instrumentation, as well as the ability to record data—combining all functions into one easy-to-use unit! Standard data—such as speed, odometer, turn signals, hi/low beam and parking brake indicators—are displayed, along with programmable shift and warning lights. In addition, these dash recorders feature internal processing to read data from OBDII and most aftermarket ECU and EFI systems. This makes the IQ3SL Street Logger a great option for modern cars or vehicles with modern EFI engine swaps. Racepak IQ3SL Street Logger dash recorder features include: * Displays standard road functions * User-defined shift light output * Displays up to 28 inputs via four page * Shielded, low-luster display for better sunlight viewing * Blue dimmable backlight * Metric and English capable * Gear Indicator * CAN-based and OBDII compatible (adapter cables available) * Four user-defined alarms * Connects to any Racepak V-Net data logger * User-defined 5-character sensor input names * Optional GPS module for speed
Not Yet Reviewed
$1,699.95
Computech custom 8-cylinder thermocouple kits come with your choice of either weld-in or clamp-on EGT probes. The EGT probes are 3/16 in. and can stand up to the most extreme temperatures. Your custom 8-cylinder thermocouple kits are available in either the Chevy (1, 3, 5, 7) and (2, 4, 6, 8) configuration or Ford (1, 2, 3, 4) and (5, 6, 7, 8) configuration. Each EGT probe has a custom-length lead, allowing the probes to plug in cleanly to the EGT modules. These Computech custom 8-cylinder thermocouple kits allow for the removal of the headers without having to take out the thermocouple sensors or un-wire.
Not Yet Reviewed
$1,599.95
Racepak LDX Logger dash data recorders combine data acquisition with Racepak's advanced instrumentation! They also take full advantage of the capabilities of V-Net technology. In addition to the wiring harness that imports signals from the engine rpm, drive-shaft rpm, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button, you can view the displayed functions by scrolling through four separate screen pages on the dash. Each page contains five user-programmable digital displays, plus the constant engine rpm bar graph. Selecting which functions will appear on each page is done through your Racepak Datalink software. The dash features output ports to connect a shift light and an external warning light. Shift points can be programmed using the screen of the dash or your software. You're also able to assign limits for the warning lights and the parameters for the dash-mounted mode buttons. Minimum and maximum levels that were attained during a recording can also be displayed. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through an included 6 ft. serial cable. The screen is backlit for nighttime use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.
Not Yet Reviewed
$1,549.95
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,649.95
—
$2,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
