Availability
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,149.99
—
$1,499.99
On Sale
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$1,599.95
$1,049.95
—
$1,599.95
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$1,202.00
$1,021.70
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 4 )
$1,495.00
Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems
( 10 )
$1,014.99
Haltech offers a variety of data acquisition components, including the iC-7 OBD-II Color Display Dash. With a crisp, clear and full-color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. The OBD-II iC-7 is preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: Preconfigured to connect directly (via CAN) to most late model vehicles (appx. 2008-on) using the factory OBD-II port * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (includes spare pins for input wiring), OBD-II to DTM-4 CAN cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag
Not Yet Reviewed
$1,195.00
On Sale
The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.
( 1 )
$1,349.95
$1,006.95
—
$1,213.95
On Sale
FAST EZ-EFI 2.0 Multi-Port Retro-Fit kits allow owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower—because the systems are based on each customer's supplied injectors. The next generation of the revolutionary self-tuning EZ-EFI has been upgraded with more features than ever before. Yet it maintains ease of use that doesn't require a laptop or tuning experience. As with the original EZ-EFI, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 tunes itself as you drive. The new high-quality wiring harness (with a sleek mesh-type loom) uses commonly available late model OEM sensors for accuracy and durability. The EZ-EFI 2.0 has an updated hand-held, as well, featuring the industry's first color touch screen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS—meaning there are nearly limitless mounting options (suction cup mount is included with all kits). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits—and all kits work with wet nitrous systems, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition features an EZ-Solution option, meaning that it is plug-and-play with FAST Dual-Sync distributors for electronic timing control, or can be used with an EFI distributor of your choice and a FAST crank trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor where timing is set manually. Experience the advantage of fuel injection without the headaches; order a FAST EZ-EFI 2.0 Multi-Port Retro-Fit kit.
( 10 )
$1,589.95
$1,430.96
On Sale
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,222.95
$1,100.66
—
$1,210.95
COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group
( 7 )
$1,195.00
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 54 )
$1,225.99
—
$1,505.99
$1,162.99
—
$1,428.99
On Sale
DiabloSport Trinity 2 EX Platinum PCM swaps saves factory settings and returns easily to stock. Trinity T2 Platinum PCM swaps are designed for those who want the best of both worlds, pre-loaded, high performance tunes in addition to custom tuning capability. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows you like to bolt-on upgrades and extract every bit of horsepower out of your vehicle. That is where CMR custom tuning comes in. Their nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. These kits offer the most advanced performance programmer and monitoring setup of its kind. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Taking advantage of DiabloSports cutting-edge PCM Swap program allows you to focus on the sleek, new look with T2, while enjoying power and improved drivability, and the swap process is seamless, affordable, and best-in-class.
( 2 )
$1,099.95
FAST XIM ignition modules are an easy and effective way to install your FAST XFI fuel injection system on your distributor-less, ignition-type EFI engine. These modules are available alone or in an ignition kit with a wiring harness included. The installation is a simple plug and play with factory-type connectors to plug into the factory sensors. You're ready for XFI fast with FAST XIM ignition modules.
Not Yet Reviewed
$1,007.94
—
$1,131.95
COBB Tuning Volkswagen Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Volkswagen ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Volkswagen Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Volkswagen specific features (availability varies by model): * Adjustable Traction Control: Adjust target slip on the fly and maximize tire grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level between 3000 and 8000 RPM; enabled in COBB OTS maps * Launch Control: Adjust on the fly with six pre-configured RPM slots to dial-in based on track conditions and vehicle configuration; enabled in OTS Maps and configurable within Accesstuner Pro
( 1 )
$1,195.00
Kleinn spare tire horns are the perfect solution for Super Duty diesel truck owners who have lifted their truck and are running oversize tires, installed an aftermarket bumper or added a behind the bumper winch. The horns mount on a custom designed bracket that mounts where the factory spare tire would normally mount. The kits include the Demon Model 730 steel triple train horns, a heavy-duty 100 percent duty cycle waterproof air compressor, 3-gallon air tank and every part needed for simple, bolt-on installation. This is the loudest, largest, and most aggressive train horn on the market, bar none, however, this system is fully upgradable to be even louder by adding a Kleinn Ultra BlastMaster valve upgrade kit (sold separately) for a truly earth-shaking experience.
Not Yet Reviewed
$1,369.95
COBB Tuning Nissan Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your GT-R. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps—or use custom mapping for any modification level. The Accessport V3s will be the last engine management solution you'll ever need. They are also available with TCM flashing. Order the programmer designed for your year/submodel application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * In vehicle mount with on/off switch * Faster, easier to use * Interchangeable faceplates
Not Yet Reviewed
$1,035.00
—
$1,460.00
COBB Tuning Porsche Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your sports car. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. The Accessport V3s will be the last engine management solution you'll ever need. Programmers are also available with PDK flashing, and will allow you to tune both the engine and transmission control units in your supported Porsche. Order the unit designed for your year, model, and engine application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * COBB tuning is included, with enough space for 100 calibrations * In-vehicle mount with on/off switch * Interchangeable faceplates
( 1 )
$1,160.00
—
$1,265.00
On Sale
After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more
( 1 )
$1,599.95
$1,149.95
—
$1,649.95
On Sale
Juice up your rig with Attitude from Edge Products! Plus, get the added value of the new CS2 monitor! Edge Juice with Attitude CS2 programmers control the timing and duration of injector firing for your rig to deliver maximum performance, improved drivability, and better fuel economy. These plug-in modules are easy to install and come with factory-style connections. You'll be driven with on-the-fly adjustability and monitoring capabilities at your fingertips. You can monitor vital engine data, enhance your towing performance, and customize your Attitude to fit that of your own with the included Mystyle software. You control your rig's attitude with the right juice--Edge Juice with Attitude CS2 programmers.
( 2 )
$1,049.95
Racepak IQ3s displays are complete replacements for your factory dash cluster. The digital gauges provide a visual for speed, turn signals, fuel level, high beam, parking brake, time, odometer, trip, and much more. Plus, IQ3s displays can connect to Racepak's optional GPS module, where mechanical speed input is not available. And, last but not least, they look fabulous! Racepak IQ3s street dash digital gauge feature points include: * Display standard road functions * Display up to 28 inputs via four pages * Blue backlight * Gear indicator * Eight user-defined alarms * User-defined 5-character sensor input names * User-defined shift light output * Shielded, low-luster display for sunlight viewing * Metric and English capable * CAN-based and OBD2 compatible * Connect to any of Racepak's V-Net data loggers
( 6 )
$1,299.95
The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,283.75
Caspers Electronics complete 86/87 engine wiring harnesses are 100 percent electronically inspected and designed to work exactly like your original harness—only better! These Caspers exclusive harnesses are OEM designs with modern-day improvements, like better wire routing, sealed automotive spec relays, separate positive feeds through the harness, and a factory fit and finish. Features and benefits: * Uses correct color-coded automotive-grade TXL oxygen-free copper wire throughout * All color coding conforms to OEM specifications. Tracers were added in certain wiring to correctly identify during build * All connectors used are GM factory-specified OEM connectors * Five fuse links are installed (original design used only three fuse links, two shared) * The harnesses use individual ground wires for every electrical ground in the harness (no internal splices) to assist in the electrical integrity of the grounds * Grounds are extended to allow placement on intake bolt instead of bell housing bolts * Hard plastic wiring channel that is located under coil pack has been eliminated and replaced with round conduit * Most of the taping has been replaced with hard plastic conduit clips to eliminate unravelling * Extensive under-taping is applied to the wiring bundles for build integrity * All internal splices are ultrasonically welded for improved connection integrity * Several connections have been lengthened to improve fit over OEM harness * New design oval conduit clips are supplied, produced with improved material * Plated metal clips are supplied to facilitate installation * All relays have been replaced with 21st century automotive sealed relays * Fan delay relay has been eliminated to address electrical reliability issues inherent in its design
Not Yet Reviewed
$1,099.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$1,000.99
—
$1,614.99
No matter what machine your racing, the AiM EVO4 data logger is the tool you'll need to improve set-up and on-track performance. These data acquisition units feature integrated GPS, a built-in triaxial accelerometer, and direct connectivity to hundreds of aftermarket and factory ECUs. EVO4 pulls data from analog inputs, digital inputs, and rpm input—as well as from the internal GPS, accelerometer, and ECUs. Lap times transmitted from the infrared receiver and the internal temperature of the system can also be obtained. EVO4's advanced expansion and sampling capabilities provide the flexibility of recording data from a variety of sensors and sources. Complete, compact, and expandable; the AiM EVO4 data loggers are exceptional points in which to build perfection for winning performance.
Not Yet Reviewed
$1,349.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
