Availability
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 546 )
$1,015.55
—
$1,528.55
Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems
( 10 )
$1,014.99
Painless Performance 26-circuit 1969 direct-fit Camaro harnesses are complete for a trouble-free, headache-free install. True to their name, Painless delivers these kits with virtually every connector installed on the harness out of the box. They cover all common options, plus a fully integrated ground circuit. Included are provisions for the RS headlights and taillights, cowl hood, and even a complete console harness! The 26-circuit 1969 Camaro harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * 120+ page manual full of color schematics, photos, and step-by-step instructions
( 10 )
$1,069.99
Don't take chances with old or questionable relays that can leave you stranded. ACDelco replacement relays are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's needs to ACDelco.
( 15 )
$1,265.99
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 45 )
$1,003.99
—
$1,505.99
ARC has designed these Flat Touch switch panels with no electronic parts, making them unaffected by EMI and RFI interference. They are available in your choice of 4, 8, or 12-switch configurations and utilize the newest technology in components rated at up to 1 billion cycles. The ARC Flat Touch switch panels feature 40 amp relays, and each switch has an internal selector to allow for on/off or momentary switching. Included with the switch panels are a variety of race words that allow you to tailor the switches to your specific vehicle. The unique backlit design lights up red when the switches are off and then changes to light green when in use. With their weatherproof design, the ARC Flat Touch switch panels are ideal for open-cockpit applications. They also have a simple jumper connection that selects either 12 V or 16 V operation. Weighing in at under .5 lbs., the ARC Flat Touch switch panels provide weight savings, making them an excellent choice for your race car.
( 84 )
$1,012.99
—
$1,077.99
Casper Electronics has made several thousand engine control harnesses for the Grand National since their first one in 1996. Caspers Electronics GN-to-Holley engine harnesses are built to the highest standards, ensuring correct operation from the get-go and the reliability you'd expect from an OEM harness. With a strong focus on upgradability and reliability down the line, much of these harnesses are modular, allowing upgrades over time by simply plugging in the appropriate harness. Gain the benefit of decades of experience building engine control harnesses; select Caspers harnesses for your build. Benefits and notes: * All wire used is automotive spec 125 degrees C rated, brand new, crosslinked TXL and SXL wire cut by machine * All terminations are done by press and continual in-process inspection occurs throughout production * All harnesses are electronically inspected for point-to-point continuity, as well as resistance and serial numbered Please note: These harnesses are non-returnable.
Not Yet Reviewed
$1,495.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$1,000.99
—
$1,662.99
The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,254.35
Scott Drake underdash wiring harnesses feature all brand new parts with no care needed, including the fuse block, clips, lamp sockets, and all molded plugs. They're made of superior-quality materials to give you the long-lasting durability and performance you expect, and are made to exact specifications to ensure a perfect fit and finish. Order the harness designed for your classic 1960s muscle car.
( 5 )
$1,099.95
—
$1,149.95
Caspers Electronics complete 86/87 engine wiring harnesses are 100 percent electronically inspected and designed to work exactly like your original harness—only better! These Caspers exclusive harnesses are OEM designs with modern-day improvements, like better wire routing, sealed automotive spec relays, separate positive feeds through the harness, and a factory fit and finish. Features and benefits: * Uses correct color-coded automotive-grade TXL oxygen-free copper wire throughout * All color coding conforms to OEM specifications. Tracers were added in certain wiring to correctly identify during build * All connectors used are GM factory-specified OEM connectors * Five fuse links are installed (original design used only three fuse links, two shared) * The harnesses use individual ground wires for every electrical ground in the harness (no internal splices) to assist in the electrical integrity of the grounds * Grounds are extended to allow placement on intake bolt instead of bell housing bolts * Hard plastic wiring channel that is located under coil pack has been eliminated and replaced with round conduit * Most of the taping has been replaced with hard plastic conduit clips to eliminate unravelling * Extensive under-taping is applied to the wiring bundles for build integrity * All internal splices are ultrasonically welded for improved connection integrity * Several connections have been lengthened to improve fit over OEM harness * New design oval conduit clips are supplied, produced with improved material * Plated metal clips are supplied to facilitate installation * All relays have been replaced with 21st century automotive sealed relays * Fan delay relay has been eliminated to address electrical reliability issues inherent in its design
Not Yet Reviewed
$1,099.99
Standard Motor Products offers a full line of these replacement switches for your power windows. You can count on Standard Motor Products for the replacement parts that you need.
( 37 )
$1,018.99
—
$1,296.99
The mission of Altronics PowerQuest switch panels is to equip your race car with performance electronics that are easy to use and affordable. These complete stand-alone systems replace your primitive mechanical "rocker" switches with state-of-the-art touch screens and solid-state digital switching technology. PowerQuest supplies you with six preset and two user-defined channels and each can be preset for 1-30 amps, which means that you will no longer be replacing blown fuses. There is no PC required for setup; everything is done through the touch screen buttons. Altronics PowerQuest switch panels bring you modern, efficient performance, many options, and ease of use, all at a competitive price--mission accomplished. Features include: * Press one button to start engine * Operate multiple electrical devices, including water, fuel, fan, lights, ignition, and other options * Automatic switches can be time-delayed to turn on after Start button is pressed--allows for easier engine cranking before ignition, and fuel is enabled with less risk of flooding * Resettable solid-state fuse allows you to preset 1-30 amps on each channel * Switches can be limit programmed (e.g., water pump will turn on when water temperature is above 120 degrees F) * Switches feature soft start option to eliminate in-rush current when load is first turned on * Switches can be set for momentary or toggle operation * Works with gloves * Water temperature sensor included
Not Yet Reviewed
$1,149.99
Ron Francis EXPRESS wiring systems make high performance wiring easier--even if you're not a pro! Their Ford powered EXPRESS wiring systems are built for your custom wiring applications and are delivered with all of the connectors and wiring that you need for your complete car, including the starter, alternator, steering column, and even the cooling fan relay! Ron Francis systems start with a terminal block crafted from polished stainless steel and include only high-temperature, fire-resistant, color-coded wiring, along with the highest quality terminals to do your wiring job right. And add-on accessories are not a problem, as a multi-connection battery junction block is included to reduce the number of wires going to your starter. Plus, their clear, color-coded instructions make your installation clean and professional. You can achieve successful results when you wire your Ford with Ron Francis EXPRESS wiring systems.
( 4 )
$1,264.15
Mopar Replacement instrument panel wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that Mopar Replacement instrument wiring harnesses will provide the fit, form, and function of OE specifications. Select the harness designed to fit your application.
( 1 )
$1,007.99
—
$1,537.99
Palmgren transformers are designed to provide reliable and safe power to your machines with built-in circuit breakers and thermal protection. With multiple voltage taps, you can easily adjust the voltage output to match the requirements of your machines. These step-down style transformers are an ideal solution for powering various machines and tools in your workshop. These 3 Phase units come in models with different input/output voltages. Choose the transformer model suited to match your machines requirements.
Not Yet Reviewed
$1,141.99
Mopar Replacement clips and multi-purpose retainers are genuine OE-replacements. These versatile clips are manufactured from quality materials and factory specs to fit and perform just like the originals. Restore, repair, or maintain your vehicle with the correct Mopar components.
( 3 )
$1,000.99
—
$1,575.99
Mopar Replacement transmission wiring harnesses carry power and signals to/from the solenoids and sensors. These direct-fit replacements are manufactured from quality materials, just like the originals, to fit just like the originals. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to restore and/or repair your Chrysler, Dodge, Jeep, or Ram properly and safely.
Not Yet Reviewed
$1,033.99
—
$1,575.99
HalTech Elite 2000/2500 ECU Nissan RB terminated engine harnesses offer the fastest and most cost effective way to wire your race car or engine conversion. Simply connect a handful of labelled wires and these plug-and-play harnesses allow you to be up and running in just a few hours. HalTech offers several configurations for Nissan's single and twin cam RB engines. Installing these harnesses in conjunction with a Haltech Elite ECU (available separately), opens the door to virtually limitless performance modification and tuning of your vehicle. The quick start guide will walk you through installation of the harness into your vehicle, and is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. Select the HalTech Elite 2000/2500 ECU terminated engine harness needed for your Nissan RB engine.
Not Yet Reviewed
$1,020.00
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech PRO550 V8 complete harnesses designed to install a FuelTech FT550 on mostly any racing V8 application. These plug-and-play harnesses comes pre-terminated to suit a V8 engine with all relays and fuses for a simple 3-wire battery hookup and ignition power. They have a 37-pin firewall connector to make installation an easy task and with the modular construction, adding individual coils is as easy as connecting add-on harnesses utilizing the built-in output connectors. Each connector has its own label and the connectors and harness insulation are heat, moisture, and oil-resistant.
Not Yet Reviewed
$1,199.00
These Pico wire connectors are designed to provide maximum current transfer. They are available in a variety of styles and sizes to help you build the best electrical connection possible. Don't get stranded by a faulty wire or electrical connection--pick up some of these Pico wire connectors for the ultimate in durability.
( 4 )
$1,027.99
—
$1,229.99
Motorcraft direct-fit battery cables provide exceptional quality and fit. The preferred choice of Ford Motor Company, these cables will provide the dependability and performance you have come to expect for your Ford, Lincoln, and Mercury vehicles. They're available in a variety of styles for different applications. The assembled cables feature corrosion-resistant terminal ends that are factory-crimped and shrink-wrapped to help provide protection from extreme underhood conditions.
( 1 )
$1,007.99
—
$1,492.99
Motorcraft offers electrical switches for a variety of vehicle functions, such as power seat adjustment, cruise control, door locks, window operation, open door warning, starter clutch, and windshield wipers. These factory-style replacements are economical and designed to restore original performance. They're available in numerous actuation styles. Order the model recommended for your vehicle and switch application.
( 2 )
$1,384.99
Dozens of sensors, lights, motors, and switches—nearly every accessory on your vehicle is powered through a wiring circuit. When any of those electrical components begin to fail, Motorcraft wiring connectors can help restore proper operation. For repairs or replacement on Ford, Lincoln, and Mercury vehicles, in particular, Motorcraft carries a full line of wiring pigtails and connectors for countless applications, using technologies that exactly replicate the OEM products. Depend on Motorcraft for precision electrical parts with the fit, form, and function you need!
( 8 )
$1,358.99
—
$1,399.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
