Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
7 Results Found For "device"
Showing In Stock Items. Show All 14 Items.
Not Showing Customizable Items. View Customizable Items.
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
On Sale
Edge Pulsar MD Modules
Edge Pulsar MD modules unlock the full potential of your medium-duty diesel truck with an unparalleled blend of power, efficiency, and control, enhancing your driving experience, whether it's used for work or for play. Engineered with precision and innovation, Edge Pulsar MD modules are equipped with advanced tuning capabilities, delivering a noticeable boost in horsepower and torque, and providing drivers an exhilarating yet reliable performance upgrade. Experience the thrill of improved throttle response and power while maintaining the highest levels of engine safety and durability by continued use of the factory defuel and ECM monitoring systems. Seamlessly integrated into the vehicles on-board ECM and steering wheel controls, Pulsar MD modules offer a hassle-free installation process that requires no complex modifications or ECM flashing. This means the device is easily removed, returning the truck to stock settings in minutes. The plug and play functionality ensures that users can enjoy the benefits of enhanced performance and feature control like speedometer calibration for larger tires, without compromising the integrity of their vehicles factory settings. Elevate your driving adventure with Edge Pulsar MD. Features: * Five adjustable on-the-fly power levels: -- 1. Economy 25hp/70tq -- 2. Heavy towing 60hp/125tq -- 3. Light towing 90hp/180tq -- 4. Drive 95hp/255tq -- 5. Extreme 120hp/280tq (peak to peak gains) * Gains up to 135hp/300tq at 2,550 rpms * Speedometer calibration for tires up to 50 in. * Gained 2.1 seconds in 0 to 60mph tests * Command Manual Regeneration * Read and clear DTCs * Uses steering wheel controls to adjust levels and features
Not Yet Reviewed
$1,126.95
$1,013.95
On Sale
DiabloSport Modified PCMs
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$1,024.95
—
$1,399.95
On Sale
DiabloSport Modified PCM and inTune i3 Packages
After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more
( 1 )
$1,177.95
—
$1,649.95
$1,059.95
—
$1,483.95
On Sale
DiabloSport inTune i3 PCM Swaps
DiabloSport inTune i3 PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Select the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
Not Yet Reviewed
$1,649.95
$1,483.95
AEM Electronics Tesla Sport Large Drive Unit Control Boards
Install a Tesla Sport Large Drive Unit (LDU) in any vehicle—and achieve complete control with AEM EV's Sport LDU Inverter Control Board (P/N 30-8410) and an AEM VCU! This system provides full control of the LDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. The Tesla LDU currently comes in two versions, Base and Sport. AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's Sport LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. NOTE: The Inverter Control Board must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla Sport LDU. This system is designed for conversion and motorsports vehicles with Tesla Sport LDU swaps. It will not control a Tesla Sport LDU in a Tesla OE chassis.
Not Yet Reviewed
$1,075.95
AEM Electronics Tesla Small Drive Unit Control Boards
AEM Electronics Tesla small drive unit control boards allow you to install a Tesla SDU in any non-OEM application, unlocking complete control when paired with an AEM VCU. The system provides full control of the SDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. AEM EV's Tesla inverter control boards act as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's SDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. Note: Inverter control boards must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla SDU. This system is designed for conversion and motorsports vehicles with Tesla SDU swaps. It will not control a Tesla SDU in a Tesla OE chassis. Features: * Programmable, direct replacement for Tesla SDU inverter control board (ICB) * Allows for customized control of torque and regenerative braking curves, torque rates, and motor spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications * SDU board works with both front and rear variants of the Tesla SDU
Not Yet Reviewed
$1,126.95
