Computers, Chips & Programmers Ignitions & Electrical

On Sale

DiabloSport Modified PCMs

DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!

5.0 out of 5 stars ( 2 )

$1,024.95

—

$1,399.95

On Sale

FiTech Ultimate LS Standalone ECUs

FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.

3.8 out of 5 stars ( 51 )

$1,202.00

$1,081.80

Summit Racing™ Megasquirt Engine Management Combos

Optimize your engine for the best performance and operation with our Summit Racing™ Megasquirt Engine Management Combos. These combo kits provide you with the flexibility to precisely tune your engine—which will make a noticeable difference in its attitude from startup to wide-open throttle!

5.0 out of 5 stars ( 1 )

$1,099.97

Edge EZ Modules with Insight CTS3

Edge EZ modules with Insight CTS3 provide plug-in power that is almost like having a full-time pit crew on the dash! Want more pull, better throttle response, and real-time visibility without turning your truck into a science project? These modules combine plug-and-play performance with a 5 in. touchscreen monitor so you can add power and keep tabs on the vitals at the same time. They are designed to install using factory-style connections with no cutting/splicing and no complicated tuning, and capable of returning the vehicle to stock status when removed with no ECM flash footprint. The full-color touchscreen plugs into the OBD-II port with no wiring required, displays dozens of parameters, and lets you swipe between screens. You can use the built-in performance testing (0-60, 1/4-mile), do Wi-Fi updating, data logging, and get alerts to help protect your ride when temperatures or pressures climb. Whether you are towing, commuting, or playing, Edge EZ Modules with Insight CTS3 help you dial it in and keep it in check. More product features and notes include: * Most EZ applications offer multiple power levels you can adjust on-the-fly through the Edge smartphone app, plus an adjustable throttle booster so you can tailor pedal feel for towing, commuting, or weekend fun * Diesel-friendly monitoring features like manual DPF regen and live data monitoring on supported applications * Power gains, power levels, included mounts, and emissions legality vary by application; check the specific part number for details and any CARB EO/compliance notes

Not Yet Reviewed

$1,013.95

On Sale

Edge Juice Modules with Attitude CTS3 Programmers

Edge Products' Juice modules with Attitude CTS3 programmers are the ultimate tuner for the average diesel owner and horsepower junkies too! Featuring state-of-the-art CTS3 technology, the Juice with Attitude offers a whole new realm of features to continue pushing the limits of on-the-fly power, control, and monitoring. This in-cabin controller not only monitors vital vehicle parameters but allows you to shift-on-the-fly by controlling the Juice module for maximum control and power gains. If you own a diesel truck and you're looking for complete control over your driving experience, look no further than Juice with Attitude CTS3 programmers. Additional product attributes: * Slim, sleek case with state-of-the-art swipe technology * 5 in. full color, high-resolution touchscreen with the latest swipe technology (with one-touch easy menu navigation) * Light sensitivity meter to dim screen as ambient light decreases * HDMI style plug for power and linking EAS accessories * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge layouts, including on-the-fly power level adjustment on screen * Wi-Fi updates and notification center * Multiple power levels for mileage, towing, daily driving, performance, and extreme power curves * Additional Hot Unlock available for some applications for an additional power level * Up to 180 hp and 400 torque gains, depending on application * Dynamic built-in safety features like EGT backdown, cold engine protection, transmission slip backdown and more Note: Some features may vary by make/model/year. Configure your vehicle to search for parts and features specifically for your application.

Not Yet Reviewed

$1,349.95

—

$1,599.95

$1,213.95

—

$1,438.95

On Sale

Edge Pulsar LT Module with Insight CTS3 Programmers

The Edge Pulsar LT with Insight CTS3 Programmer is a new inline module for various Chevrolet and GMC applications—offering complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT offers you the ability to adjust throttle response, tire size, gear ratio, TPMS, and your top speed limiter. (Pulsar LT for Duramax applications can also be used to command a manual DPF regen cycle, automatic transmission relearn, clear DTC's and high idle the engine.) It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Stepping it up one notch, this kit also includes the industry-leading Insight CTS3 monitor for all the live data you could ever ask for. The Insight is the most preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. It's the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. CTS3 is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install. This is the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle. It can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle. A vehicle-specific A-pillar display mount is also included for a sleek, more permanent way to mount the CTS3 in the cab of your truck. These mounts offer an OE look, while keeping the monitor within easy reach without obstructing your view of the road. Order the model recommended for your vehicle and engine application. Product features: * Calibrate Tire Size (29 in. - 50.9 in.) * Adjust Throttle Response * Modify Gear Ratio (2.00 - 6.99) * Change Top Speed Limiter (98 - 140 mph) * Clear Diagnostic Trouble Codes * Transmission Relearn * Manual Regen * Reprogram TPMS Threshold (40 - 99 psi) * Simple Installation Process * Does Not Modify ECM

Not Yet Reviewed

$1,126.95

—

$1,299.95

$1,013.95

—

$1,168.95

On Sale

Edge Pulsar Insight CTS3 Programmers

The Edge Pulsar Insight CTS3 Programmers are an advanced monitor and tuning combo that eliminates the need for ECU swaps, fuel pressure boxes and other underperforming tuning products. With simple installation, huge performance gains and the crisp insight display, this Edge Products tuner and monitor combo is all you need for the street. The Pulsar allows you to change power levels on-the-fly, without having to shut-off the vehicle and the module delivers up to 90 hp and 156 TQ and has a transmission relearn feature for the increase in power. Along with the relearn feature, the module also has transmission slip backdown to decrease power when clutch slip is detected in the transmission and allows you to recalibrate the speedometer for wheel, tire and gear changes through the Insight CTS3. The Insight CTS3 portion of this tuner/monitor combo has a sleek housing with a full-color high-resolution capacitive touch screen with haptic response. The Insight CTS3 can display power level, while monitoring rpm, boost psi, mph, gear, ECT, EGT and much more. Built-in safety features such as EGT backdown, high-idle adjustment, cold engine protection, gear change backdown, injector balance rates and much more can be monitored by the Insight. Key features of Pulsar Insight CTS3 programmers: * Wi-Fi updateable * Built-in turbo timer * Adjustable high-idle setting * Five on-the-fly adjustable power levels * Speed limiter adjustments * TPMS pressure adjustments * Enhanced throttle response with built-in throttle sensitivity control * Updates for Pulsar are managed through the Insight instead of requiring a laptop computer

Not Yet Reviewed

$1,299.95

—

$1,449.95

$1,168.95

—

$1,303.95

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,364.95

—

$1,377.95

Mopar Replacement ABS Modules

Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.

5.0 out of 5 stars ( 14 )

$1,047.99

On Sale

Edge EZX Modules With Insight CTS3

The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.

5.0 out of 5 stars ( 1 )

$1,149.95

—

$1,399.95

$1,033.95

—

$1,258.95

On Sale

DiabloSport Modified PCM and inTune i3 Packages

After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more

1.0 out of 5 stars ( 1 )

$1,177.95

—

$1,649.95

$1,059.95

—

$1,483.95

AiM Sports MXP 1.3 Strada Data Loggers with Street Icons

The AiM MXP 1.3 Strada with Street Icons data loggers combine a high-contrast TFT display with essential road-legal indicators (turn signals, high beams, oil) and advanced data logging capabilities. They replace standard gauges, offering customizable dashboards, ECU connectivity, and configurable RGB alarms for both street and track performance. The MXP 1.3 Strada data loggers are ideal for daily driven performance cars, track-day vehicles, or for use in modernizing older instrument clusters. Key benefits of the MXP 1.3 Strada with Street Icons: * Dual functionality—the "Street Icons" allow you to wire analog inputs to simulate traditional vehicle warning lights, such as hazard lights, high beams, and turn signals, making it ideal for road-going or dual-purpose vehicles * Superior visibility—with 6-inch TFT screen offers 50 percent more display area than 5-inch screens and includes an ambient light sensor to automatically adjust brightness * Customizable alarms and shift lights—includes 5 (standard) or 6 (1.3 model) configurable RGB alarm LEDs and a 10-LED shift light array, so you can set custom colors, flashing frequencies, and accompanying text messages for each alarm * Massive ECU compatibility—can support over 2,000 industry-leading ECUs via CAN, RS232, or K-Line connections; this allows you to display dozens of channels (RPM, speed, water temperature, oil pressure, gear) with as few as two cable connections * Expandable system, while the Strada itself is a display-only unit (it does not log data natively), it can be upgraded to a full data logger by adding the AiM Strada Logger kit (sold separately); unit also supports expansions like the GPS09c module for track mapping and SmartyCam for video overlays * Camera integration—features two analog camera inputs, allowing the display to function as a rearview mirror or backup camera triggered by a button or specific event

Not Yet Reviewed

$1,499.00

Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits

Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.

Not Yet Reviewed

$1,126.95

On Sale

DiabloSport Pulsar Module/Trinity 2 MX Performance Monitor Kits

DiabloSport Pulsar module/Trinity 2 MX performance monitor kits offer the ultimate combination of on-the-fly adjustable performance and digital monitoring, Installing in minutes, the Pulsar modules are in-line computers that connect directly to your vehicle's PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the PCM, Pulsar can control signals to optimize performance gains, throttle response, MDS controls, mileage, and more. Even better, the Pulsar offers several performance levels that are changed by using your vehicle's cruise control +/- buttons on the steering wheel. Power levels are displayed on the dash. The Trinity 2 MX is an eye-catching, 5 in. full color capacitive touch screen that gives you the sharp, crisp graphics and limitless monitoring, so you can keep a close eye on your vehicle's vitals. They feature an auto-dimming screen and a customizable background display. Take full control of your vehicle with DiabloSport Trinity 2 MX/Pulsar kits. Choose the kit designed for your vehicle.

Not Yet Reviewed

$1,549.95

$1,393.95

On Sale

DiabloSport Trinity 2 MX Performance Monitor/Pulsar LT Module Kits

DiabloSport Trinity 2 MX performance monitor/Pulsar LT module kits bring together the ultimate in vehicle control and monitoring. Packaging their one-of-a-kind in-line module with their most advanced digital gauge solution, these DiabloSport kits make it possible for you to easily adjust throttle response levels, tire size adjustment, TPMS options, speed limiter, and more without tuning or modifying your vehicle. They also include a vehicle-specific T2 pillar mount and the necessary hardware. The Pulsar LT connects directly to the vehicle computer system and makes its changes in-line with the other modules. Utilizing steering wheel controls, Pulsar LT owners can make all the changes they desire at any time, driving or parked. The Trinity 2 MX is an eye-catching, 5 in. full color capacitive touch screen that gives you the sharpest graphic display available, so you can keep a close eye on your vehicle's vitals. They feature an auto-dimming screen and a customizable background display.

Not Yet Reviewed

$1,299.95

$1,168.95

Chevrolet Performance Automatic Transmission Controllers

These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.

5.0 out of 5 stars ( 1 )

$1,244.59

On Sale

DiabloSport Trinity 2 Platinum/Modified PCM Performance Kits

DiabloSport Trinity 2 Platinum/modified PCM performance kits are designed for those who want the best of both worlds: pre-loaded, high performance tunes and custom tuning capability. They feature the Trinity 2 high-resolution, 5-inch capacitive touch screen with full swipe functionality, industry-leading gauge designs, jaw dropping power potential, and a powerful, yet simple, user interface. These performance kits also include an easy-to-install unlocked PCM to accept the tune and keep your stock PCM safe and unaltered. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows enthusiasts like to bolt-on upgrades and extract every bit of horsepower out of their vehicles. That's where CMR custom tuning comes in. DiabloSport's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport Trinity 2 Platinum/modified PCM performance kit best suited for your ride!

5.0 out of 5 stars ( 1 )

$1,499.95

$1,348.95

Manufacturer Rebate

AutoMeter InVision 8.8 in. LCD Dashes

AutoMeter InVision 8.8 in. LCD Dash delivers a clean, modern instrument solution for a wide range of custom, retromod, and performance applications. Featuring a high-resolution 8.8 in. LCD display, it consolidates essential vehicle information into a single, easy-to-read interface designed to complement any interior style. Built for flexibility, the InVision 8.8 in. LCD Dash supports a broad range of drivetrains and sensor configurations, making it ideal for custom installations and aftermarket builds. With intuitive customization, integrated indicators, and trusted AutoMeter engineering, it provides modern digital functionality without limiting your design or layout choices. Features: * Monitors speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in a high resolution and colorful display * 8.8" LCD display with five user selectable screens and color customization *High beam & turn signal indicators as well as user selectable warning light * All kits include a wiring harness and sending units for water temperature and oil pressure as well as a joystick for dash customization * Adjustable RPM range and displays in imperial or metric measurements * Helps protect your vehicle with visual and audible alarms - low fuel level/oil pressure/voltage and high-water temperature * Speedometer easily calibrates to OEM or aftermarket vehicle speed sensors and the tachometer is capable of calibrating to many engine types * 7 user-selectable fuel level resistance ranges to pair with original and aftermarket sending units * Tachometer capable of calibrating for 1-, 2-, 3-, 4-, 5-, 6-, 8-, 10-, or 12-cylinder engines

Not Yet Reviewed

$1,189.99

COBB Tuning Ford Accessport V3 Programmers

COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group

4.29 out of 5 stars ( 7 )

$1,195.00

On Sale

Edge Pulsar V3 with Edge Insight CTS3

The all-new, redesigned, L5P Duramax Pulsar V3 is the most advanced L5P performance product on the market, without question. The addition of the industry-leader in digital gauges provides the potent power and visibility combo that has no competition. The Insight CTS3 is a category killer in the digital gauge segment with its high-res 5 in. color touch screen with full swipe capability and edge-to-edge graphics. When the Pulsar V3 and the CTS3 Insight are paired, you get more than just impressive gauges—you gain full control over the Pulsar, including power level adjustment, transmission slip protection on/off, EGT backdown adjustment, high idle adjustment, throttle sensitivity adjustment, and more! Now you can pair two of the best options on the market to get full control over the performance of your L5P Duramax with the Insight CTS3 + Pulsar V3 kits. Product features: * Transmission slip protection (On/Off) * EGT backdown adjustment * Throttle sensitivity adjustment * Cold engine backdown enable/disable * Shift backdown enable/disable * High idle adjustment 700-1100 rpm * Turbo timer time and EGT * On-the-fly adjustable levels with the touch of a button * Full color, 5-capacity touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot up directly to gauge screen upon key cycle * Read/Clear trouble codes * Full data monitoring * Data logging * Expandable accessory system * Wi-Fi updateable

Not Yet Reviewed

$1,449.95

$1,303.95

On Sale

Edge Pulsar MD Modules

Edge Pulsar MD modules unlock the full potential of your medium-duty diesel truck with an unparalleled blend of power, efficiency, and control, enhancing your driving experience, whether it's used for work or for play. Engineered with precision and innovation, Edge Pulsar MD modules are equipped with advanced tuning capabilities, delivering a noticeable boost in horsepower and torque, and providing drivers an exhilarating yet reliable performance upgrade. Experience the thrill of improved throttle response and power while maintaining the highest levels of engine safety and durability by continued use of the factory defuel and ECM monitoring systems. Seamlessly integrated into the vehicles on-board ECM and steering wheel controls, Pulsar MD modules offer a hassle-free installation process that requires no complex modifications or ECM flashing. This means the device is easily removed, returning the truck to stock settings in minutes. The plug and play functionality ensures that users can enjoy the benefits of enhanced performance and feature control like speedometer calibration for larger tires, without compromising the integrity of their vehicles factory settings. Elevate your driving adventure with Edge Pulsar MD. Features: * Five adjustable on-the-fly power levels: -- 1. Economy 25hp/70tq -- 2. Heavy towing 60hp/125tq -- 3. Light towing 90hp/180tq -- 4. Drive 95hp/255tq -- 5. Extreme 120hp/280tq (peak to peak gains) * Gains up to 135hp/300tq at 2,550 rpms * Speedometer calibration for tires up to 50 in. * Gained 2.1 seconds in 0 to 60mph tests * Command Manual Regeneration * Read and clear DTCs * Uses steering wheel controls to adjust levels and features

Not Yet Reviewed

$1,126.95

$1,013.95

Holley Hilborn Universal Terminator X MPFI Systems

The Hilborn EFI-R manifold systems combine electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. Holley Hilborn Universal Terminator X MPFI systems provide cutting edge EFI technology, and are intended for the most serious naturally aspirated performance enthusiast. Each kit includes a CAN-USB tuning dongle, so you can tune your EFI system specifically for your engine via Holley's free Terminator X EFI software. Also included is a universal main harness, EV1 injector harness, Bosch LSU 4.9 wideband, input/output harness, and main power harness. These kits are for use with Hilborn EFI-R intake manifolds: * 300-800 for Big Block Chevrolet applications requiring 2 7/16 in. throttle bores * 300-801 for Big Block Chevrolet applications requiring 2 5/8 in. throttle bores * 300-807 for Big Block Chevrolet applications requiring 3 in. throttle bores

Not Yet Reviewed

$1,299.95

On Sale

Edge Pulsar Duramax Modules

Edge Pulsar Duramax modules are innovative in-line tuners that have totally changed the game when it comes to adding performance and keeping the ECU on the truck. No mail-in unlocks, no cross-shipment, or hassle. Pulsar supplies instant power, on the fly, with no flash tuning. Now with carb compliant EO coverage for sale in all 50 states! Features: * EO Number D-802-9 * Change five power levels on-the-fly using +/- cruise control buttons * Connects directly to ECU in engine compartment providing instant power * Built-in throttle sensitivity control for improved throttle response * High-idle user settings to adjust rpm during idle * Transmission slip backdown power will decrease if slip is detected * EGT Backdown power will decrease if EGTs exceed set limit * Provides the ability to recalibrate the speedometer for wheel/tire changes * Simple installation with no complex wiring harness or ECU flashing required * Ships with update cable

4.0 out of 5 stars ( 1 )

$1,126.95

$1,013.95

COBB Tuning Volkswagen Accessport V3 Programmers

COBB Tuning Volkswagen Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Volkswagen ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Volkswagen Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Volkswagen specific features (availability varies by model): * Adjustable Traction Control: Adjust target slip on the fly and maximize tire grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level between 3000 and 8000 RPM; enabled in COBB OTS maps * Launch Control: Adjust on the fly with six pre-configured RPM slots to dial-in based on track conditions and vehicle configuration; enabled in OTS Maps and configurable within Accesstuner Pro

5.0 out of 5 stars ( 1 )

$1,195.00

28 Results Found For "Performance"