Availability
Showing In Stock Items. Show All 28 Items.
Nitrous Express throttle position activation switches are more durable and contain short circuit protection not found in other similar products. Constructed to work with most EFI vehicles, these switches are designed to trigger a relay at 1/2 amp max current draw, at or near wide open throttle.
( 7 )
$151.06
NOS has you covered with their specialty switches. They have both standard dashboard mount and remote mount switches to fit practically any application. Activating nitrous systems and other accessories has never been easier.
( 12 )
$127.95
Activate and deactivate circuits at pre-programmed rpm "windows" with these Nitrous Express switches. They are especially useful for nitrous-equipped engines because the nitrous system can be shut down just before the engine's high-rev limit. They include a ground to activate a circuit and can handle up to 1.5 amps.
( 3 )
$253.85
On Sale
Nitrous Outlet ProMax progressive controller fuel pressure sensors allow your ProMax controller to see accurate fuel pressure. They feature an 1/8 in. NPT male thread for an easy connection to the pressure source. Nitrous Outlet ProMax fuel pressure sensors read up to 100 psi and include wiring pigtail.
( 1 )
$123.99
$105.39
You don't want to be blasting nitrous into the engine if fuel pressure is below what is required to supply the required extra fuel. Control fuel pressure with NOS pressure safety switches!. These switches prevent your nitrous system from engaging when the fuel pressure is below a safe level. The easy-to-install NOS versions for all carburetor and direct port nitrous systems are preset at 4 psi and most are adjustable from 4 to 7 psi (non-adjustable also available). Have an EFI application? NOS offers safety switches preset at 50 psi that are adjustable from 30 to 70 psi. Stay safe with Nitrous Oxide Systems pressure safety switches.
( 6 )
$111.95
—
$119.95
Nitrous Express gauge pod switch panels make it possible to have key nitrous controls at your fingertips! These billet aluminum custom panels fit snugly into any 2 1/16 in. gauge pod, with a bracket on the back side to keep them from twisting. The panels are laser-etched for the included switches: Nitrous, Bottle Heater (both with LED indicator lights), Purge, and Bottle Opener. Why fumble around searching for the correct nitrous oxide controls—they're now within arm's reach with Nitrous Express gauge pod switch panels, available in universal and application-specific models.
( 2 )
$101.92
—
$164.36
On Sale
Nitrous Outlet switch panels are designed to give you a clean look—and make using multiple nitrous-related options easier to manage with the use of large, easy-to-reach switches. These panels are constructed of water jet-cut aluminum and have a black anodized finish and a custom fit. They'll work with any brand of nitrous system and accessories, and with no drilling needed, will mount to your cup holder, ashtray, or console, depending on the application.
( 18 )
$137.99
$117.29
—
$147.99
Tired of probing your vehicle's harness for rpm, TPS, Mass Air Flow, and vehicle speed? Nitrous Express Signal Synchronizers make finding all of these signals easy, converting them into a useable format for nitrous controllers, water methanol controllers, data loggers, or any other electrical device that needs to see a PWM or 0 to 5 V signal. The TPS signal feature is especially beneficial for installing a nitrous controller in newer vehicles that do not have traditional TPS and rpm signals, and wiring a Nitrous Express Signal Synchronizer could not be easier; just plug the unit into your compatible vehicle's OBD2 port and let it go to work for you!
Not Yet Reviewed
$181.90
ZEX has taken their patented TPS activation circuit and placed it in easy-to-install, stand-alone units. These programmable TPS switches allow anyone with a non-ZEX nitrous system to enjoy the benefits of using their throttle position sensor to reliably activate their nitrous system at wide-open throttle.
( 4 )
$104.95
On Sale
Whether your engine has forced induction or is naturally aspirated, Holley MAP sensors will keep your engine performing at its best. They're available in 1, 2, 3, 3.5, 5, and 7-bar models, with a variety of psi ranges. Choose the style preferred for your application.
( 18 )
$199.95
$179.95
The universal remote button and spiral cords from B&M are great all-around units and are ideal for bracket racing. They are designed for use with trans-brake, launch control, and nitrous systems. The switch contains self-cleaning terminals and a 1 lb. spring for a light "snap" feel. They are rated at 12 amps.
( 8 )
$113.95
B&M remote mushroom cap button and cord assemblies are ideal for racers who wear heavy gloves and cannot feel the light microswitch, or those who race with multi-hit delay boxes. They contain a lightweight spiral cord and self-cleaning terminals, and have a bounce-free operation. They are also ideal for Full and Pro Tree applications.
( 6 )
$131.95
On Sale
Hurst Roll Control button switches have the edge with a microswitch and cords. These switches deliver immediate and accurate releases with a capacity of 10 amps. The included wire makes installation hookup a snap.
( 19 )
$139.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$349.95
$192.95
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 59 )
$151.92
—
$207.92
On Sale
MSD rpm-activated window switches allows you to take control of your nitrous. You can activate and deactivate circuits at pre-programmed rpm "windows" and they are especially useful for nitrous equipped engines, because the nitrous system can be shut down just before the engine's high-rev limit. They include a ground to activate a circuit, and can handle up to 1.5 amps.
( 26 )
$286.95
$199.95
—
$258.25
The Lingenfelter Performance Engineering STOV-004 is a vehicle speed-based switch that can be used to enable or disable devices based on vehicle speed—much like an RPM switch or RPM window switch, but instead based on vehicle speed. The STOV-004 also provides a 0-5 volt analog output corresponding to vehicle speed that can be used to provide a vehicle speed signal to many other add-on devices. These switches can accept the vehicle speed output signal from most engine control modules and can also connect directly to many common speed sensors. The Lingenfelter STOV-004 can also provide a stage/gear shift output for boost controllers and other devices that need to see a gear shift position switch output to change stages. Product features: * Accepts a wide range of pulse count frequencies from 100 to 60,000 pulses per mile (PPM) * Works with ECM output signals and stand-alone Hall effect-type speed sensors * Easy-to-use vehicle speed learning mode using push-button switch in the back of the module * Set the PPM count even when you do not know the PPM configuration of the vehicle * Built-in vehicle speed sensor signal pull-up resistor that is enabled by a DIP switch setting inside the back cover for applications that require a pull-up resistor * Simplifies wiring * Easy to adjust high and low vehicle speed settings via four front-mounted 10-position switches * Provides switched outputs or window switch outputs based on vehicle speed * Provides ECM/PCM vehicle speed frequency to analog voltage conversion Available output types: * Normally ON ground * Normally OFF ground * Normally ON +12vdc * 0-5vdc/0-250 mph linear analog output Stage/gear shift output mode works with multi-stage boost and nitrous controllers including: * Turbosmart eBoost2 * NLR AMS1000 * Leash Electronics Boost Leash Gear-Based controller Benefits: * Easily adjustable activation point in 1 mph increments * Enable nitrous or an additional stage of nitrous-based on vehicle speed * Enable a boost controller for increased boost above a certain vehicle speed * Disable fans above a certain vehicle speed * Lock a torque converter clutch above a certain vehicle speed * Disable a 2-step once the vehicle is moving so that it does not activate on each gear change
( 2 )
$140.55
Shifnoid rpm-activated switches can be used to activate CO2 or electric shifters, nitrous oxide solenoids, shift lights, timing computers, or any other device that needs to be activated at a preset rpm. They accept plug-in modules, so you can set your specific rpm. The Shifnoid rpm-activated switches are 12 and 16 V compatible and have been designed to work on V8 engines.
( 4 )
$114.99
Granatelli Motor Sports Pro Series coil packs exceed your OEM expectations with increased performance. Pro Series 60,000 V coils provide more volts than factory and are intended for those running high compression engines and small nitrous kits. These coil packs increase horsepower and improve mileage and throttle response; plus, they are OBD-II computer safe. Thanks to Granatelli patent protected isolator rings, there's no RFI/EMI interference and 0 ohm resistance. Get incredible output with a set of Granatelli Motor Sports Pro Series coil packs.
( 5 )
$138.25
Relays are a required item whenever you want to use your XFI ECU to control a high-current device, such as a fuel pump or nitrous solenoid with one of its low-current outputs. FAST offers relays to cover many applications. When choosing a relay, it's very important that the relay current rating (shown in amps) be appropriate to the current requirements of the device you intend to control with it. So, if you're in need of a relay--think FAST relays.
( 3 )
$120.95
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$101.74
—
$101.75
Granatelli Motor Sports Pro Series DIS coil packs will add more punch to your car's ignition system. They are OBD-II computer safe but still increase power to the spark plug by up to 400 percent over stock. That extra power means a more efficient and consistent fuel burn, giving you up to 35 hp in forced induction/nitrous cars where spark blowout is common with factory coils. Let Granatelli Motor Sports help you get better fuel economy, better throttle response, and more power with these Pro Series DIS coil packs.
Not Yet Reviewed
$251.37
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
