Availability
Showing In Stock Items. Show All 117 Items.
Holley Sniper EFI oxygen sensors are the best replacements for your system. When you need to service your Sniper EFI throttle body, Holley's list of parts include these O2 sensors to maintain a proper reading of oxygen levels in the exhaust. These replacement Bosch wideband sensors feature anti-seize pre-applied to sensor threads.
( 54 )
$160.95
Summit Bucks
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 316 )
$105.99
—
$271.99
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$165.50
—
$315.95
$148.95
—
$261.14
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 71 )
$106.95
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$290.15
$136.53
—
$261.14
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$280.10
$183.81
—
$252.09
FiTech offers a variety of accessories and components for Go EFI Systems including oxygen sensors. These sensors are for replacing or upgrading existing parts and help to keep your vehicle running at top performance with long-term durability and reliability. Maintain fuel efficiency and emissions standards with the FiTech oxygen sensor best suited for your application.
( 6 )
$111.00
On Sale
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
$121.72
—
$200.97
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 39 )
$116.95
—
$129.95
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$239.25
$145.58
—
$215.32
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
March Performance alternators combine reliable amperage with stunning good looks. They are available in a choice of amperages and finishes, including polished, chrome, and black, for Ford, GM, and Mopar applications. These one-wire alternators look great in any engine compartment and provide the power you need. Additional features of March Performance alternators include: * Easy-to-connect * High-quality neoprene-sealed bearings for long life * Ultra-low cut-in voltage regulator maintains amperage at low idle speeds * High-tech rotors and stators, built with higher copper and steel content, deliver the greatest output with the best reliability * Pulley and nose cover sold separately (most models)
( 60 )
$114.99
—
$262.99
Manufacturer Rebate
To maintain your vehicle's top performance, you need the proper idle and rpm from your Holley-style 4-barrel carburetor. Innovate throttle position sensors will ensure that you are in the zone. Plus, installation is straightforward. Rely on Innovate to keep your vehicle running properly.
( 8 )
$106.99
On Sale
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$214.80
—
$223.30
$193.32
—
$200.97
Maintain optimum idle and rpm with Holley throttle position sensors. They are available for standard Holley carburetors and Holley's Pro-Jection. The sensors use quick-connect Weatherpack connectors, so installation is a snap.
( 14 )
$119.95
—
$131.95
Painless Performance Second Generation Camaro PowerBraid kits help you finish the job right. They are complete kits that can be used with multiple 2nd Gen Camaro harnesses. Each kit contains all of the appropriate diameter wrap, ties, and tape. PowerBraid is a flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables. The woven construction provides good drainage while maintaining superior abrasion resistance. The split loom design has a minimum overlap of 25 percent to allow for easy installation and optimum wiring protection.
( 1 )
$174.99
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 57 )
$102.99
—
$181.99
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$149.95
—
$158.95
The engineers at BBK have added to their arsenal of EFI performance parts with these mass airflow sensors. Starting with an all-new 356 aluminum casting, each unit is powdercoated and then fully CNC-machined to exact specifications. They are then fitted with one of BBK's new electronically calibrated mass air sensor modules (except where noted), to ensure an accurate air/fuel ratio for the best possible performance potential. Dyno testing has shown horsepower gains, while maintaining an accurate air/fuel ratio.
( 23 )
$269.99
Ron Francis Wiring hot rod battery cable kits are far superior to standard or welding cables. These flexible cables have less voltage drop and more current-carrying capacity than lesser-quality cables. Designed with a quality lug that stays round longer, these hot rod battery cable kits maintain a tight seal and resist corrosion for a long life. Ron Francis Wiring high-temperature, cross-link, one-gauge hot rod battery cables have color-coded rubber protective boots that further enhance your clean and orderly engine compartment. These kits include enough positive and negative cable to mount clear back in the trunk! These battery cable kits include a crimping tool, shrink tubing, and extra lugs for a complete installation.
( 12 )
$113.63
—
$236.13
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$208.99
$101.99
—
$278.99
Mopar Replacement crankshaft position sensors are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured from quality materials, their selection of sensors provides the perfect choice to repair and maintain your Mopar ride with the proper information to be used by the engine management system. Order the sensor designed for fitment with your make and model.
( 3 )
$107.50
—
$167.99
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$100.99
—
$226.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
