Availability
Showing In Stock Items. Show All 547 Items.
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 7 )
$132.99
—
$179.99
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement HalTech sensors are used to measure fluid pressure and temperature. Available in different psi ranges, each sensor includes matching plug and pins, and is individually electronically tested before packaging. Select the psi needed.
Not Yet Reviewed
$160.00
Nitrous Outlet ProMax progressive controller fuel pressure sensors allow your ProMax controller to see accurate fuel pressure. They feature an 1/8 in. NPT male thread for an easy connection to the pressure source. Nitrous Outlet ProMax fuel pressure sensors read up to 100 psi and include wiring pigtail.
( 1 )
$123.99
ACDelco GM Genuine Parts fuel pressure sensors send readings to the powertrain control module, which uses the data to adjust fuel delivery parameters. These true GM OE sensors are factory-recommended replacements, manufactured to provide the performance, durability, and service life you expect from General Motors. Monitor your fuel system accurately with the model designed for your application.
( 3 )
$105.99
—
$123.99
Dorman secondary air pressure sensors effectively measure fuel pressure in the fuel rail, alerting both the EVAP system and the fuel system to leaks. Restore engine performance with Dorman sensors. Features include: * Stops and prevents rough idle * Replacement shuts off the "check engine light" * Restores fuel efficiency * Rigorous quality control measures have been undertaken to ensure parts conform to product standards
( 2 )
$130.99
—
$137.95
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$104.99
—
$257.99
Fleece Performance fuel heaters ensure optimal fuel flow and combustion in engines, especially in cold climates. They are for use in Fleece's heated fuel filter kits, including PowerFlo lift pumps with a heater provision on the filter base. Fuel heater specifications: * At typical fuel flow rates a temperature increase between 4 to 8 degrees F will occur across the heating element * Temperature switching points: -- ON: 28.4 degrees +/- 5.4 degrees F -- OFF: 48.2 degrees +/- 5.4 degrees F
Not Yet Reviewed
$139.00
For accurate fuel tank pressure readings, Dorman fuel tank pressure sensors are just the thing. Replacement of the fuel tank pressure sensor reliably monitors pressure in the vehicle's fuel tank. Also, the fuel tank pressure sensor will allow the vehicle's EVAP monitors to run properly.
Not Yet Reviewed
$225.95
Dorman fuel pressure sensors effectively measure fuel pressure in the fuel rail, alerting both the EVAP system and the fuel system to leaks. Restore engine performance with Dorman sensors.
( 1 )
$104.99
—
$152.99
Summit Bucks
As a leading OE manufacturer, Delphi offers a comprehensive range of sensing and actuating solutions for improved emissions control, fuel economy, and drivability—including fuel injection pressure sensors. Delphi fuel injection pressure sensors provide accurate, clean signal input to your vehicle's ECM. So, when it's time to replace, choose Delphi fuel injection pressure sensors. They're designed to meet your OE requirements and those of your wallet. Select the sensor model for your application needs.
Not Yet Reviewed
$222.99
Keep your vehicle in top running order with Standard Motor fuel vapor vent pressure sensors. Fuel vapor vent pressure sensors monitor the fuel vapor pressure in your EVAP system, keeping your check engine light off and your car running down the road.
( 1 )
$141.99
—
$197.99
Love your LS engine but hate the sight of coil packs? Top Street Performance LS ignition coil covers will hide the coil packs and dress up your engine bay. They are composed of TIG-welded 6061 T-6 aluminum, available polished or with a clear or black powdercoat finish, and come complete with mounting hardware and a billet aluminum oil filler neck and cap. Conceal unsightly coils with TSP LS ignition coil covers.
( 3 )
$167.54
—
$202.46
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$222.95
Dress up your LS engine and hide the stock coils with a set of these Eddie Motorsports LS ignition coil covers. Designed to look similar to a Big Block Chevy valve cover, these components mount to the factory coil brackets and come complete with a billet aluminum oil filter extension, screw-in cap, and all of the necessary fasteners. Coil covers are 3.625 in. tall x 19.625 in. long and will fit 4.8L, 5.3L, 6.0L and 6.2L LS engines. They are available in multiple finishes.
( 11 )
$195.00
—
$235.00
You have an alternative choice for flex fuel sensors—Innovate ethanol content sensors! While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. Innovate content sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections. For all your high performance needs, choose Innovate.
( 1 )
$117.99
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$117.95
Ford Performance Parts ignition coil covers dress up 5.0L 4V Ti-VCT Coyote and almost any 4.6L/5.4L/5.8L DOHC engines with coil-on-plug ignition systems. They're available in a variety of finishes and logos—for applications from 1996 and up. Let the competition know you're serious about performance!
( 13 )
$108.99
—
$126.99
Holley EFI benchtop harnesses are designed for benchtop testing and setup of HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes. They are great for ECU diagnostics that do not require a running engine, firmware updates, or 7 in. dash calibrations. The harness has pre-terminated connectors for the following sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI connectors for a Sniper main harness. Also includes a power switch for quick setup in your workspace. Power and ground flying leads need to be connected to your battery or power supply (not included). Key features: * Terminated connectors for multiple EFI inputs * Included power switch allows for a quick "install" on your test bench * Optimal for ECU diagnostic, firmware updating, and pre-configuring dash layouts * Works with HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes * Has pre-terminated connectors for these sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI main harness connectors
Not Yet Reviewed
$231.95
You don't have to be intimidated when changing over from a carbureted system to electronic fuel injection. These FAST EFI sensor kits provide you with everything you need to make the conversion. They include a manifold absolute pressure (MAP) sensor, coolant temperature sensor (CTS), air temperature sensor (ATS), and a throttle position sensor (TPS). The sensors are manufactured from quality materials, are available for both Ford and GM-style systems, and include a wide variety of applications. The kits work great on normally aspirated, as well as supercharged, turbocharged, 4, 6, and 8-cylinder engines. Now you can take the mystery out of EFI by using one of these complete FAST EFI sensor kits.
( 1 )
$137.95
—
$140.95
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$101.99
—
$260.99
OTB Gear ignition coil covers have taken a page from the classic "old school fins" book. Not only are they great looking, they have some worthwhile features—such as a standoff rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. The covers are mounted with 1/4 in.-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft-grade A356 aluminum, they're available with a natural finish or polished to a very high sheen. Some models feature chromed coils.
( 2 )
$149.00
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$119.95
—
$149.95
Clayton Machine ignition coil covers stylishly hide the LS engine coil packs. Unlike the plastic or fiberglass versions, these covers are machined from 6063 T-6 aluminum and can be ordered in black or grey powdercoated finishes; they're also available unfinished so you can customize them to match your vehicle. The covers fit GM LS engines utilizing existing coil bracket mounting points, and are ideal for LS crate motors. (Unless a cutout is fabricated or aftermarket alternator and brackets are used, they will not clear factory high mount alternators, like those found on Corvettes.) Clayton Machine ignition coil covers can be used with relocated coil packs for a lower profile appearance, and are best suited for aftermarket serpentine pulley systems. Additionally, they're available with or without the oil fill hole.
( 11 )
$310.95
AEM Electronics Wideband UEGO Controller Air/Fuel ratio gauge components are designed to be used with AEM wideband UEGO controller air/fuel ratio gauges. Whether you need to replace your sensor or cable, these parts will help you to get your gauge back in working order.
( 23 )
$145.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
