Availability
Showing In Stock Items. Show All 53 Items.
Don't take chances with old, questionable, or faulty intake air temperature sensors that can send misleading information to you and your vehicle's computer. Standard Motor Products offers replacements designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These intake air temperature sensors are available for a wide range of makes and models, and some units also include a wiring harness. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 11 )
$104.99
—
$112.99
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$149.96
—
$322.46
$134.96
—
$290.21
Whether you're looking for a cylinder head temperature, intake manifold temperature, exhaust gas temperature (EGT), or fluid temperature sensor, Racepak thermocouple sensors have you covered. Racepak also offers adhesive thermocouples that eliminate the need for bung and other sensor mounting methods, making them ideal for a number of surface temperature readings such as shock housing, engine block, fuel tank, fuel pump, electric motor, and battery temperature. These Type-K thermocouple assemblies (Nickel-Chromium/Nickel-Aluminum) are precisely designed for their specific applications and must be used with the appropriate thermocouple amplifier module (sold separately). All probes are terminated with a male 2-pin mini-connector.
Not Yet Reviewed
$158.95
—
$159.95
Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.
( 6 )
$225.19
—
$279.65
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 29 )
$133.00
On Sale
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 32 )
$167.99
—
$189.99
$151.19
—
$170.99
On Sale
Give some more spark to your ignition system using these Professional Products LSX high performance coil packs. They provide a maximum voltage of 40 kV and the longest spark duration available. The coil packs fire 1/8th as many times as the old single coil systems, providing eight times as long for the coil to regenerate power for the next spark. On multiple coil setups like these LSX high performance packs, longer spark duration is highly desirable to ensure that 100 percent of the intake charge is ignited—for maximum power throughout the entire rpm range.
( 20 )
$129.99
—
$296.99
$116.99
—
$267.29
On Sale
The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.
( 11 )
$184.95
$131.95
—
$166.45
MSD sport compact coils are direct bolt-in replacements that intensify the spark output of your ignition, helping your air/fuel intake charge burn more completely. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring.
( 38 )
$125.95
FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.
Not Yet Reviewed
$159.00
Summit Bucks
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$118.99
Moroso ignition coil mount brackets are designed for use with Moroso valve covers, but can be drilled to be used with other valve covers, or to remote-mount coils in a different location. These coil bracket kits may be used to relocate the LS coil between the top of the valve cover and the intake, and when used with Moroso valve covers, the valve cover can be removed and installed without disturbing the coils or brackets. Two versions are available: one for LS1/LS6 coils and the second for LS2, LS3, LS7, L92, L98, and L99 coils. The kits include black anodized aluminum brackets and hardware (one kit does one LS engine).
( 1 )
$163.99
2009+ Gen III Hemi engines rolled off the showroom floor with Variable Valve Timing (VVT). Both the Terminator X and Terminator X Max ECUs will allow you to control and tune the VVT with the use of Holley EFI Gen III Hemi VVT harnesses. These plug-and-play harnesses (to the factory sub-harness) provide control of VVT solenoid under the intake manifold.
Not Yet Reviewed
$125.95
On Sale
Put some more juice into your ignition system with these Professional Products Ford Powerfire ignition coil packs. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution. The coil packs are available for 2-valve, 3-valve, and 4-valve Ford engines.
( 21 )
$116.99
—
$252.99
$105.29
—
$227.69
On Sale
Holley EFI Gen III Hemi VVT and SRV harnesses offer control. 2009+ Gen III Hemi engines rolled off the showroom floor with Variable Valve Timing (VVT). Now, both Holley Terminator X and Terminator X Max ECUs will allow you to control and tune the VVT with the use of the plug-and-play VVT harness. But the fun does not stop there! If you are using a stock intake manifold that came from the factory with the Short Runner Valve (SRV), Holley also has a plug-and-play sub harness that will allow you to utilize the SRV actuator and capitalize on its low rpm torque benefits. Features: * Plug-and-play with the factory Gen III HEMI VVT sub-harness, and any Holley EFI HEMI main harness connecting to the power tap and input/output connectors * Provides control of VVT solenoid under the intake manifold * SRV (Short runner valve) connector pre-wired into the sub harness allowing you to simply plug into the factory SRV actuator in the intake manifold
Not Yet Reviewed
$163.95
$147.55
On Sale
Bully Dog sensor docking stations offer an unparalleled glimpse into the comparative health of your vehicle. These accessories for the GT and Watch Dog product lines make it easy to install aftermarket automotive sensors onto your modern vehicle, and then display those specific values. They support a multitude of different measuring device types, including pressure (oil and/or boost), speed, and temperature sensors (exhaust, transmission and/or air intake). Bully Dog sensor docking stations are a superb, easy way for you to instantly check on the well-being of your vehicle.
( 1 )
$156.99
$141.29
On Sale
Every engine swap has a few minor clearance issues that must be resolved for a slick and straightforward engine installation. Thankfully, Hooker offers battery tray relocation kits that will allow you to move a battery from the driver's side to the passenger side for air intake and air filter clearance. The battery trays are laser-cut, formed from steel for a factory look, and feature a black powdercoated finish for corrosion protection. The mounting hardware is provided to offer an easy bolt-on installation. Order the model you need.
Not Yet Reviewed
$173.95
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$123.95
—
$279.95
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$103.99
—
$261.99
Hella mass airflow sensors will correctly calculate the intake air mass in your internal combustion engine. The efficient running of your engine depends on several things, and these sensors are one of those important parts. They are quality-built, direct replacements for your malfunctioning or damaged mass airflow sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$103.99
—
$221.99
Fleece Performance valve cover conversion harnesses are available to convert your 6-pin injector connector to a 4-pin or vice versa. These harnesses are designed for early or late rocker box styles, plug into the factory harness, are designed to run on backside of engine, and the factory connector goes under the intake shelf. They produced in-house at Fleece with their manufacturing process including fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts needed. Select the harness designed for your truck's rocker box style.
Not Yet Reviewed
$139.99
Make room for larger intakes or clean up your engine bay by installing a Hybrid Racing battery relocation tray in front of the gearbox. These brackets also work with and are part of the Hybrid Racing 3.5 in. cold air intake kit. Additional notes: * Fits OEM or smaller batteries * Gain engine bay real estate * Laser-cut steel, black powdercoat finish * Fits: -- 2007-10 Acura CSX Type S -- 2006-11 Civic Si (FA5/FG2) -- 2007-10 Civic Type R FD2 (requires modification) -- 2007-10 Civic Type R FN2 (requires modification)
Not Yet Reviewed
$103.54
The manifold absolute pressure (MAP) sensor is part of many engine electronic control systems. It delivers instantaneous manifold pressure information to the engine's electronic control unit (ECU). The data provided by the MAP sensor is used to calculate air density and determine the engine's air mass flow rate. This data determines the required fuel metering and ignition timing for optimum engine performance. Denso manifold absolute pressure sensors provide superior air and fuel regulation with leading edge sensing technology. As one of the first companies to produce engine management sensors, Denso continues to bring new technology to the industry. Key features of Denso manifold absolute pressure sensors include: * Meets or exceeds OEM specifications * Manufactured with the highest quality materials * Efficiently measures the pressure of the intake manifold * Engineered to fit the first time * Enhances performance and fuel economy by replacing a failing MAP sensor
Not Yet Reviewed
$209.99
—
$247.99
Bosch Manifold Absolute Pressure (MAP) sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance. Each model features an extremely sturdy design with special coatings for resistance of harmful chemicals inside the intake manifold. Bosch continually improves their MAP sensor designs with the latest chip technology, and they're engineered to meet or exceed your vehicle's original equipment specifications (performance, drivability, economy, and emissions). Dozens of styles are available for specific vehicle and engine applications. Don't let your engine's performance suffer—replace your faulty MAP sensor with the reliability of Bosch.
Not Yet Reviewed
$144.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
