Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
62 Results Found For "Cams"
Showing In Stock Items. Show All 82 Items.
MSD Replacement Cam Sync Distributor Hall Effect Pickups
MSD replacement cam sync distributor Hall effect pickups are perfect for refreshing the timing pickup on your engine. These kits include an LED operation light that makes for quick indexing. Also included is the mating connector with terminals and seals for an all-around rebuild. Make sure your ignition is firing correctly when it supposed to be firing with high-quality replacement components like MSD cam sync distributor Hall effect pickups!
Not Yet Reviewed
$119.95
Mopar Replacement Camshaft Position Sensors
Mopar Replacement camshaft position sensors are affordable, reliable, and built to last. They're also a smart choice to keep your Chrysler, Dodge, Plymouth, Ram, or Jeep running smooth and efficiently. These genuine OE replacements provide the proper function, as well as the right fit to make your install hassle-free. Order the model designed for your specific vehicle application.
( 3 )
$111.99
—
$136.99
Crown Automotive Oil Pump Drive Assemblies
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
Holley Cam Sync Sensor Kits
Timing is everything. Holley EFI cam sync sensor kits provide the components to set your engine's power curve for optimum performance. The complete kits include a sensor, stainless steel flying magnet target with high-temperature rare earth magnet, connector, pins, seal, and washers. The kits are also available without the flying magnet target and washer; plus, the components are also available individually. Eliminate ignition timing variations and mis-adjustments with Holley cam sync sensor kits. Features include: * 3-wire Hall effect camshaft sensor generates digital square-wave signal * Can work with internal and external cam drive systems (i.e. gear, chain, and belt drive systems with or without timing cover) * Can operate from 8 to 20 V * M12x1 threads for finer gap adjustability; approximately 1.5 in. length
Not Yet Reviewed
$188.95
Denso Camshaft Positioning Sensors
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$113.99
—
$162.99
Dorman Camshaft Position Sensor Wiring Harnesses
Dorman camshaft position sensor wiring harnesses offer a reliable, durable, and cost-effective repair solution for damaged original equipment parts. The wiring harnesses, and the accompanying pigtail connectors, are designed to match the appearance and function of the original hardware on specified applications. They are specifically designed to restore proper engine function by ensuring a secure and accurate signal transfer to the engine control unit (ECU). This is crucial for precise ignition timing, optimized fuel injection, enhanced fuel efficiency, reduced engine emissions, prevention of misfires, rough idling, or stalling conditions, and overall engine performance.
Not Yet Reviewed
$119.99
FuelTech Cam Sync Bracket Kits
FuelTech cam sync bracket kits are a mounting bracket and magnetic kit designed only for use with a raised cam BBC when utilizing a camshaft belt drive and requires MSD ignition Hall Effect pickup (sold separately). The mounting hardware is included in the bracket kit for installation. Please note that some modifications may be required to correctly fit your application.
Not Yet Reviewed
$129.00
Standard Motor Camshaft Position Sensors
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 15 )
$102.99
—
$231.99
Holstein Parts Camshaft Sensors
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$100.99
—
$170.99
Delphi Camshaft Position Sensors
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$100.99
—
$150.99
Hella Camshaft Position Sensors
Hella camshaft position sensors will work along with your crankshaft sensor to determine the exact position of the crankshaft drive, and letting your engine control unit know when the first cylinder is in the top dead point. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$103.99
—
$111.99
Beck/Arnley Camshaft Position Sensors
How fast is your cam spinning and why is it important to know? Beck/Arnley camshaft position sensors enable you to accurately measure camshaft speed. This speed determines when your air/fuel mixture should be ignited in your engine cylinders and sends data from your camshaft to your engine management system to keep your vehicle running smoothly and more economically. When you need to replace your camshaft position sensors choose parts made right from Beck/Arnley.
( 1 )
$100.99
—
$117.99
Dorman Camshaft Position Sensors
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$115.99
—
$185.95
MSD Synchronization Pickup Kits
To take advantage of the programmable Digital-7's Individual Cylinder Management system, a synchronization pickup must be incorporated so the ignition knows exactly which cylinder is firing. With this information, the MSD can begin your unique timing sequence through each cylinder! MSD offers two ways to accomplish this: Spark plug wire sync kits and cam sync pickups.
( 3 )
$182.95
—
$183.95
Holstein Parts Variable Valve Timing Solenoids
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$100.99
—
$239.99
Clearance
Beck/Arnley Variable Valve Timing Solenoids
Beck/Arnley variable valve timing solenoids are direct-fit OE replacements to facilitate ease of installation and factory-style performance. They're made of high-quality materials to withstand extreme conditions, and they undergo extensive testing to ensure reliability. The solenoids are available for a wide range of vehicle applications.
( 1 )
$105.99
—
$111.99
COMP Cams Melonized Distributor Gears
COMP Cams melonized distributor gears are designed to provide universal compatibility for any steel, cast iron, or ductile iron camshaft—but without the wear concerns of bronze options. They're less prone to wear, and feature better timing accuracy and higher strength than any other universally compatible distributor gears. Choose the shaft distributor diameter for your particular vehicle.
( 61 )
$103.95
—
$118.95
COMP Cams Composite Distributor Gears
COMP Cams composite distributor gears are manufactured from carbon ultra-poly composite to ensure superior strength and less wear. They're the latest in high-tech distributor gears designed around solving the wear issues associated with bronze gears in racing applications. The polymer gears are ideal for street roller applications--they feature virtually no wear, and they eliminate the problem of spark scatter associated with worn bronze gears. Composite gears have undergone stringent testing in various applications with positive results.
( 67 )
$151.95
—
$164.95
Howards Cams Composite Distributor Gears
Make bronze distributor gear wear a thing of the past with these Howards Cams composite distributor gears! NASCAR-proven technology yields precise timing and extended durability. They are precision-manufactured from carbon ultra fiber material and offer 300 percent more durability than bronze distributor gears when used with steel camshafts. Howards Cams composite distributor gears can be used with cast or billet cams.
( 8 )
$142.99
—
$149.99
MSD Cam Sync Generators
After an MSD DIS-2 series ignition control is installed on the waste spark ignition system of some vehicles, the ECM of the vehicle will not be able to receive a cam sync signal. These MSD cam sync generators produce a cam sync signal after startup for the factory ECM. This is done by detecting a cylinder that is under compression through its signal wire, which is wrapped around the designated spark plug wire.
( 2 )
$108.95
MSD Iron Camshaft Mounted Distributor Gears
MSD puts their years of experience to work in making these top-notch iron camshaft mounted distributor gears. Their high-grade ductile iron is micro-polished for a smooth and scuff-free finish, and then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these iron camshaft mounted distributor gears for tighter mesh to the distributor gear.
( 19 )
$129.95
Howards Cams Reluctor Wheels
Eliminate failure due to the reluctor slipping on the crankshaft with Howards Cams reluctor wheels. They feature a one-piece billet steel design and are held to the highest tolerances. Upgrade your vehicle with a Howards reluctor wheel.
( 2 )
$119.99
COMP Cams LS-Style Ignition Coil Mounting Kits
COMP Cams offer mounting kits that enable you to mate GM LS3 coils (vertical mounting kit) and FAST XR-1A LS-style coils (horizontal mounting kit) to COMP's billet valve covers. Manufactured from steel and E-coated for durability and a sleek appearance, these brackets are lightweight in design and the perfect complement to COMP Cams billet valve covers. Built to keep the coils off the engine to avoid dangerous "heat soak" conditions, they also allow for quick and easy access to the plug wires and coil harness. Order the kit recommended for your year/make and engine application.
Not Yet Reviewed
$217.95
COMP Cams Bronze Distributor Gears
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$117.95
