Availability
Showing In Stock Items. Show All 12 Items.
Scott Performance high performance spark plug wire sets feature 10mm 30 ohm fiberglass jacketed wire with helically wound alloy cores. The plug/distributor boots are high-temp silicone materials and the terminals are stainless steel. All spark plug wire sets are handmade and individually tested to assure quality and performance. They're available in different colors and multiple configurations to provide the perfect fit for your engine. Order the spark plug wire set suited for your application.
( 47 )
$155.56
—
$162.43
On Sale
PerTronix Flame-Thrower Ceramic Hi-Temp universal spark plug boots protect against direct heat, withstanding up to 2,000 degrees F. These universal boots provide the very best protection for applications with tight fitting headers or exhaust manifolds, and they fit typical 8mm spark plug wires. Pertronix offers the Flame-Thrower Ceramic Hi-Temp boots in several boot angle configurations individually and in sets of 8 to retrofit an entire spark plug wire set. Each kit includes pure silicone plug(s), wire bushing(s), spark plug terminal(s), and high-temperature ceramic boot(s).
( 36 )
$123.60
$111.24
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$167.95
$107.05
—
$199.95
Denso ignition wire sets fit right, look right, and work perfectly. Their end caps are identical to OE and are designed to "click" into place for easy installation and a secure fit. An installer can feel and hear that a solid connection has been made, even in a difficult-to-see location. Through a patented process, the terminals are attached with an extremely strong connection ensuring the cable and boot will not separate during removal and installation. Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. Denso 7 and 8mm ignition wire sets are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40 to 428 degrees F and pass tests covering everything from electrical properties, to shrinkage, to chemical resistance, and accelerated life testing. Features and benefits of Denso Ignition Wire Sets include: * High-temperature silicone jacket to withstand heat, cold, chemicals, and moisture * Reinforcing member for added strength and terminal retention * Silicone insulation for superior dielectric and heat performance * Conductive silicon layer on 7 and 8mm wires for high-temperature performance and EMI/RFI noise suppression * Fiberglass braid for maximum strength on 7 and 8mm wires * Carbon-impregnated fiberglass core for superior conductivity on 7 and 8mm wires * Core reinforced with KEVLAR® on smaller diameter wires * Conductive layer impregnated with Ferrite on smaller diameter wires * Wire-wound layer on smaller diameter wires to suppress EMI/RFI noise * Superior dielectric and thermal qualities * Factory-original fit, appearance, and performance * World-class chemical and oil resistance
( 10 )
$110.99
If you're running headers with close tolerances or have an engine bay with little room, Summit Racing™ ceramic ignition wire sets are the cure for burnt and melting boots. Their ceramic coating acts as a heat mirror, reflecting infrared energy and heat away from the plug boot—and it's engineered to resist flaking and peeling. The 8mm spiral core silicone wires deliver maximum energy to the spark plugs with built-in RFI suppression for your street-driven vehicle. These affordably priced wire sets are true performance upgrade replacements for OE types. They're available (assembled or non-assembled) with different terminal and boot ends for fitment on a range of vehicle applications.
( 90 )
$107.99
—
$122.99
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$261.95
On Sale
MSD 8.5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs. This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.
( 13 )
$210.95
$116.95
—
$199.95
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 649 )
$226.50
$203.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
