Availability
Showing In Stock Items. Show All 107 Items.
Dakota Digital OBD-II/CAN interfaces are designed to plug directly into your engine's diagnostic port, extracting transmission data from the OBD-II computer. They can output speed, rpm, and engine temperature. The interfaces decode the information supplied from the ECM and supply this information to the VFD3 rev. G, VHX and HDX control box instruments. * Module for use with Dakota Digital RTX, HDX, VHX, and VFD3 systems with a black control module.
( 59 )
$133.00
Innovate LC-2 Digital Wideband Lambda O2 Controller kits are ideal for applications such as dynamometers, data acquisition systems, stand-alone ECU's, and gauges. They feature self-calibrating circuitry to compensate for changes in temperature, altitude, and sensor condition. These units include a digital input/output, and two full-programmable analog outputs. It can be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with Innovates' Modular Tuning System (MTS). Additional features include: * Patented DirectDigital™ Wideband Technology * Wideband O² Compatible with all fuel types * Ability to calibrate O² sensor for maximum accuracy * Integrated dual-color status LED (Green/Red) * Two configurable linear 0-5v analog outputs * Positive lock connectors for all connections * Innovate MTS serial in/out * Serial connection to your PC * Real-time display data on screen and/or with powerful LogWorks software
( 11 )
$178.99
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$229.95
—
$259.95
HalTech offers a wide range of data acquisition components, including this GPS Speed Input Module for applications that require a digital speed signal. It also includes a GPS antenna matching male DTM-3 connector and pins. * Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU inputs, GPS update rate 10Hz, high accuracy 0.3 percent deviation, pulse compensation in tunnel, anti-GPS drift technology.
( 1 )
$130.00
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 26 )
$133.00
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$139.95
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$209.95
—
$239.95
Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.
Not Yet Reviewed
$129.95
—
$169.95
AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.
( 1 )
$164.99
If you've changed anything to higher pressure output then you'll want one of these Racepak powered pressure transducer sensors. They are available in different psi ratings, so you can choose what range best suits your application.
( 2 )
$249.95
Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.
( 2 )
$259.99
—
$262.99
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
On Sale
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$149.95
—
$158.95
On Sale
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$125.95
$113.35
Collect the data you need with these Edge universal sensor input harnesses. These harnesses are designed to read any 0-5 V signal and convert it into useful data that can be displayed on your Edge CS or CTS. Using one of these Edge universal sensor input harnesses will allow you display a variety of custom gauges and values on your CS or CTS programmer, making it an even more versatile tool for your vehicle.
Not Yet Reviewed
$240.95
Holley EFI benchtop harnesses are designed for benchtop testing and setup of HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes. They are great for ECU diagnostics that do not require a running engine, firmware updates, or 7 in. dash calibrations. The harness has pre-terminated connectors for the following sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI connectors for a Sniper main harness. Also includes a power switch for quick setup in your workspace. Power and ground flying leads need to be connected to your battery or power supply (not included). Key features: * Terminated connectors for multiple EFI inputs * Included power switch allows for a quick "install" on your test bench * Optimal for ECU diagnostic, firmware updating, and pre-configuring dash layouts * Works with HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes * Has pre-terminated connectors for these sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI main harness connectors
Not Yet Reviewed
$231.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$189.95
—
$224.95
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!
( 25 )
$107.99
—
$109.99
Racepak V-Net cable bulkhead connectors are used when a V-Net cable must pass through a firewall, body, or motor plate. They provide a male and female connector on each side of the panel.
Not Yet Reviewed
$149.95
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$104.95
—
$124.95
Keep track of the movement of your shocks with one of these Racepak shock travel modules. Designed for use with Racepak shock travel sensors (sold separately), they do not require any programming and can accept inputs from up to four individual shock sensors. When used in conjunction with Racepak's shock travel kits, critical shock and chassis adjustments can now be made with confidence through the use of shock travel data.
Not Yet Reviewed
$199.95
—
$229.95
Racepak Sportsman/G2X mounting plates offer a perfect mounting solution for safely mounting Sportsman/G2X data loggers. You can secure your data logger to your roll cage with one of these mounting brackets, available in several O.D. tubing sizes. Each kit includes a logger mounting plate and a black anodized billet aluminum clamp bracket.
( 1 )
$158.95
Innovate SSI-4 Plus 4-channel interfaces can be used as stand-alone devices for logging data directly into a laptop with the included LogWorks software—or used in conjunction with any other MTS (Modular Tuning System) compliant device. Channel 1 is a direct rpm input by default, and can also be configured for external 0-5 V, frequency, or spark reference for ignition timing measurement. Channels 2-4 are configured to digitize external 0-5 V analog signals by default. Channel 2 can directly measure frequencies (like driveshaft speed) or duty cycles (for injectors). Channel 3 can measure rpm from a VR (variable reluctance) sensor, and can also be set up for ignition timing crank angle reference (trigger wheels) or frequency. Input 4 defaults to digitizing external 0-5 V analog signals, but can also be configured as a frequency input. Take control of your vehicle with an Innovate SSI-4 Plus 4-channel interface.
( 4 )
$116.99
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$106.95
—
$231.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
