Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
28 Results Found For "cable"
Showing In Stock Items. Show All 43 Items.
Racepak V-Net Tee Cables
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$101.95
Racepak V-Net Cable Bulkhead Connectors
Racepak V-Net cable bulkhead connectors are used when a V-Net cable must pass through a firewall, body, or motor plate. They provide a male and female connector on each side of the panel.
Not Yet Reviewed
$152.95
Racepak V-Net 5-Pin Cables
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$101.95
—
$127.95
Racepak Interface 7-Pin Cables
Racepak interface 7-pin cables are available in multiple lengths to extend analog and interface module connections on Racepak V300SD, V500SD and G2X Pro data loggers. They are made of high-quality materials to provide long-lasting durability and performance. If you need to extend your analog or interface connections, Racepak interface extension cables can make it happen.
Not Yet Reviewed
$101.95
—
$136.95
On Sale
Racepak ECU Interface Cables
Racepak ECU interface cables are adapter harnesses used to connect the CAN bus data stream from your existing ECU to a Racepak IQ3S (Street Dash), IQ3D (Drag Dash), or Racepak Universal CAN module. Once this CAN cable is connected and properly set up, data from the ECU is then available for use with the Racepak IQ3S, IQ3D or Racepak Universal CAN module.
Not Yet Reviewed
$101.95
On Sale
Racepak USM Connector Cables
Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.
Not Yet Reviewed
$134.95
Racepak Serial Communications Cables
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$101.95
—
$142.95
Racepak OBD II V-Net Interface Cables
Racepak OBD II V-Net interface cables offer an easy, cost-effective way to access information from your Racepak V-Net data-logger and display products. These modules enable you to record, download, and graph data the same as standard external sensors. Installation is as simple as plugging in two connectors! Detection and programming take just minutes, enabling you to record or display data in a short period of time.
Not Yet Reviewed
$101.95
AiM Sports MX-Series 1.2 Strada DL Cables
AiM Sports MX-Series 1.2 Strada DL cables are compatible with the AiM MXS 1.2 Strada, MXP 1.2 Strada, and MXG 1.2 Strada street dashes. Designed to seamlessly connect via a 14-pin AMP connector on the rear of the dash, the OBDII harness ensures efficient power, ground, USB, and CAN connections. Additionally, it facilitates a direct ECU link through the vehicle's OBDII diagnostic port. They are ideal for production vehicles equipped with an OBDII port, as the harness supports both CAN and K-Line communication standards. The AiM MX Strada Series dash sold separately.
Not Yet Reviewed
$175.00
Manufacturer Rebate
Innovate LC-2 Digital Wideband Lambda O2 Controller Kits
Innovate LC-2 Digital Wideband Lambda O2 Controller kits are ideal for applications such as dynamometers, data acquisition systems, stand-alone ECU's, and gauges. They feature self-calibrating circuitry to compensate for changes in temperature, altitude, and sensor condition. These units include a digital input/output, and two full-programmable analog outputs. It can be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with Innovates' Modular Tuning System (MTS). Additional features include: * Patented DirectDigital™ Wideband Technology * Wideband O² Compatible with all fuel types * Ability to calibrate O² sensor for maximum accuracy * Integrated dual-color status LED (Green/Red) * Two configurable linear 0-5v analog outputs * Positive lock connectors for all connections * Innovate MTS serial in/out * Serial connection to your PC * Real-time display data on screen and/or with powerful LogWorks software
( 11 )
$178.99
AiM Sports Pressure Sensors
AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.
( 1 )
$165.00
Manufacturer Rebate
Innovate SSI-4 Plus 4-Channel Interfaces
Innovate SSI-4 Plus 4-channel interfaces can be used as stand-alone devices for logging data directly into a laptop with the included LogWorks software—or used in conjunction with any other MTS (Modular Tuning System) compliant device. Channel 1 is a direct rpm input by default, and can also be configured for external 0-5 V, frequency, or spark reference for ignition timing measurement. Channels 2-4 are configured to digitize external 0-5 V analog signals by default. Channel 2 can directly measure frequencies (like driveshaft speed) or duty cycles (for injectors). Channel 3 can measure rpm from a VR (variable reluctance) sensor, and can also be set up for ignition timing crank angle reference (trigger wheels) or frequency. Input 4 defaults to digitizing external 0-5 V analog signals, but can also be configured as a frequency input. Take control of your vehicle with an Innovate SSI-4 Plus 4-channel interface.
( 4 )
$128.99
Racepak Contact Closure Driveshaft Sensors
Racepak contact closure driveshaft sensors detect driveshaft or wheel rpm. Designed to work with a variety of Racepak data loggers and dashes, these plastic sensors feature a 5/16 in. fine thread pitch and are triggered using magnets. Monitor your driveshaft's rotation with Racepak contact closure sensors.
( 1 )
$161.95
Biondo Throttle Stops
Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.
( 2 )
$169.99
Racepak Air/Fuel Sensors
Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.
Not Yet Reviewed
$132.95
On Sale
Racepak Analog Pre-Programmed V-Net Modules With Sensors
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$349.95
$172.85
—
$234.95
Racepak Analog Pre-Programmed V-Net Modules Without Sensors
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$193.95
—
$229.95
On Sale
Holley EGT Probes
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$128.95
$116.05
—
$128.95
Racepak Emergency Kits
Racepak emergency kits contain essential spare components that any racer who depends on a Racepak system should keep handy. In the heat of battle at the track, it's easy to misplace programming cables, memory cards, serial adapters, and more. These emergency kits put a backup set of the parts racers use most to program their Racepak logger and transfer data to a PC in one convenient zip-lock bag. A spare driveshaft rpm connector is included, as is a USB flash drive containing Racepak DataLink II software and manuals for easy reference.
Not Yet Reviewed
$188.95
On Sale
Racepak Plug-In Old-Style Transducer Modules
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$225.45
Racepak V-Net Modules
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$129.50
—
$236.95
Racepak Digital Pre-Programmed V-Net No Sensors Required Modules
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The module converts the signal so it can be transmitted over the V-Net. Unlike most V-Net modules, these digital pre-programmed modules do not require a sensor. They use the pulse from the component they are monitoring as the signal to the module. Racepak digital pre-programmed V-Net no sensors required modules are programmed for a specific use and are ready for plug-and-play installation on a V-Net cable.
Not Yet Reviewed
$204.95
AiM Sports Tire Temperature Sensors
AiM Sports tire temperature sensors provide a thermal reading of your tread (or any surface within its heat range) in real-time using infrared technology. These sensors include a 9.8 in. (25 cm) cable with a 719 push-on connector, allowing for direct connection to many AiM loggers. They feature a 35-degree field of view capable of accurately measuring specific tread areas or the entire tread, depending on how far from the surface they are. Mount the sensors inside the fender to shelter them from flying debris. AiM Sports tire temperature sensors simplify the task of achieving your optimum operating temperature for maximum traction.
Not Yet Reviewed
$139.00
Racepak Digital Pre-Programmed V-Net Modules Without Sensors
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules without sensors are programmed digital function modules ready for plug-and-play installation on a V-Net cable. You must add the appropriate sensor to the module.
Not Yet Reviewed
$204.95
