Availability
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
These MSD 2-step module selectors let you choose from two different rpm limits that can be activated at different times. For example, you can use a lower-rpm module for staging and then automatically switch to a higher-rpm module after you release your trans-brake or line lock. They require the use of plug-in modules, which are available separately.
( 24 )
$142.95
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 75 )
$116.10
—
$223.30
MSD rpm module selectors plug into the rpm module socket on MSD Soft Touch rev controls, ignition boxes with output for rpm, and any other accessories that use plug-in modules.
( 28 )
$119.95
—
$158.95
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 114 )
$113.95
—
$138.95
MSD 3-step module selectors are designed for great versatility. They feature three built-in rev limiters--one for burnout, one for starting line launch, and one for high end. These selectors use the MSD plug-in rpm modules.
( 10 )
$184.95
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 121 )
$112.50
ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.
( 5 )
$101.99
—
$242.99
MSD retard module selectors get you dialed in for performance. Designed for use with MSD timing controls, these module selectors allow you to select between 12 retard amounts with the turn of a dial.
Not Yet Reviewed
$158.95
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$182.20
—
$223.30
With Delphi's knowledge of OEM protocol, their ignition control modules are engineered using superior materials to improve your vehicle's performance with the benefits of greater throttle response, smoother idle, and full power output at high rpm. Delphi ignition control modules are quality, direct fit OEM replacements available for a range of applications. For improved ignition performance, spark it up with Delphi!
( 15 )
$102.99
—
$212.99
ACDelco Gold ignition control modules are a high-quality replacement for many vehicles on the road today. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. The modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints; and they've been laser-trimmed to provide precise values and reduce deterioration and damage. Gold ignition modules include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. Order the model recommended for your application.
( 10 )
$121.99
—
$264.99
Summit Racing™ offers GM high-energy modules with rev limiters that enable you to adjust the rpm limit from 5,000 to 9,500 rpm. They are high performance modules built for HEI distributors, producing 50 percent higher coil drive currents than the stock module. This saturates the coil faster, delivering more spark energy at top speeds. Your benefits are increased horsepower and rpm range, plus improved starting. GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory or aftermarket HEI distributors.
( 4 )
$130.99
Fuel Air Spark Technolory (FAST) can solve your "heart" problems! The ignition module is the heart of an automobile's ignition system, and if your dual-sync modules are overheating they'll soon completely cease to function. Loose or corroded electrical connections can also be a common cause of problems. These FAST replacement ignition modules are a simple drop-in solution to get your dual-sync distributors performing at peak efficiency.
( 2 )
$140.95
Ignition modules can eventually deteriorate and break down. Crown Automotive ignition modules will allow your car to once again ignite the fuel that allows your car to start and keep going. If you're experiencing power loss, overheating, or stalling due to failure, Crown parts are direct-fit components to discharge the spark that keeps you going.
( 2 )
$153.99
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 38 )
$101.99
—
$269.99
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$103.99
—
$179.30
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 44 )
$104.95
—
$172.95
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 68 )
$123.95
Compu-Fire ignition module kits are used by VW Baja racers. These ignition modules for Bosch distributors replace the contact breaker points. They deliver peak performance, proven durability, and an easy installation. Increase small car performance in a big way with Compu-Fire ignition module kits.
( 6 )
$120.40
—
$257.80
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$106.05
Sierra Marine offers ignition modules for a variety of watercraft distributor applications. These are OEM direct-fit replacements, so match up the part number needed for your powersports equipment.
( 1 )
$165.99
—
$220.99
FAST EZ-Run distributor modules are accurate, dependable, and maintenance-free. These replacement ignition modules have a simple 3-wire connection, saving time and space by eliminating the need for an external ignition box. FAST EZ-Run distributor modules will provide the same performance and fit as the originals they are replacing.
Not Yet Reviewed
$124.95
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 41 )
$112.95
—
$128.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
