Availability
Showing In Stock Items. Show All 10 Items.
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$165.50
—
$315.95
$148.95
—
$261.14
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$290.15
$136.53
—
$261.14
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$280.10
$183.81
—
$252.09
On Sale
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
$121.72
—
$200.97
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$239.25
$145.58
—
$215.32
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$214.80
—
$223.30
$193.32
—
$200.97
On Sale
Clearance
Four Seasons battery cooling fan motors will help to dissipate heat and maintain an optimal operating temperature for your battery. Offering coverage for import and domestic vehicles, the motors are engineered and tested to provide years of trouble free operation, and they meet or exceed OE designs and performance. Prevent overheating and prolong your battery's lifespan; choose the Four Seasons fan motor designed for your vehicle.
Not Yet Reviewed
$123.99
—
$284.99
$111.59
—
$256.49
On Sale
Made from the finest components available, these high-quality ACCEL Motorcycle Lectric stators are precision machine-wound and produce the highest output possible. The windings are then coated to maintain isolation of the pure copper windings from potential grounding sources. Some are available in an over-molded configuration for maximum isolation.
( 2 )
$382.95
$210.95
On Sale
MSD Power Grid exhaust module sensors are offered as replacements and enhancements for your module. Maintain the ability to obtain accurate data with replacement 0 to 75 psi exhaust back pressure sensors, or expand your module's abilities by adding an optional second pressure sensor with harness for dual turbo applications. Keep the operation of your Power Grid exhaust module at an optimum level with genuine MSD accessory sensors.
Not Yet Reviewed
$147.95
$110.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
