Availability
Holley Sniper EFI oxygen sensors are the best replacements for your system. When you need to service your Sniper EFI throttle body, Holley's list of parts include these O2 sensors to maintain a proper reading of oxygen levels in the exhaust. These replacement Bosch wideband sensors feature anti-seize pre-applied to sensor threads.
( 54 )
$160.95
Holley LS coil harnesses are factory replacements for stock LS coils. These EFI LS coil sub harnesses are intended to be used with factory LS coils and various Holley EFI main harnesses with coil-on-plug connectors. They are built with the same high-quality connectors and wire loom found on all Holley EFI harnesses, guaranteeing a perfect match in your engine bay. Are you tired of scouring the junkyard for stock LS coil sub harnesses? Holley has the solution. Holley LS coil harnesses feature: * OEM connectors provide a secure connection between your ECU and Ignition Coils * Techflex F6 braided wire loom keeps your engine bay looking clean, while providing abrasion resistance * Plug-and-play fitment * Can be used to replace a damaged factory coil harness
( 17 )
$199.95
Holley EFI O2 sensors precisely manage air fuel ratios to keep your engine performing at its peak. Available in Bosch LSU4 and NTK wideband configurations, Holley EFI has the correct sensor for your high performance EFI application.
( 35 )
$199.95
Holley drive-by-wire accelerator pedals perfect complements to any vehicle using DBW. They offer plug-and-play compatibility with Holley EFI and simply bolt into the stock locations when used with Holley's DBW pedal brackets (sold separately). Features: * Simplifies engine swaps with DBW accelerator systems * Works great with Holley EFI installation * Provides modern look and performance for classic vehicles * Fits in OE location when used with Holley DBW pedal brackets
( 1 )
$149.95
If you're running an electric choke Holley carburetor and are having trouble figuring out how to get that electronic overdrive transmission to work, Holley has the perfect solution for you. Holley TPS kits are designed for use on an electric choke-equipped Holley carburetor and are perfect for use with an electronic overdrive transmission, such as a 4L60E or 4L80E. They can also be used for data acquisition. These TPS kits are also designed to supply the needed TPS signal to an electronic transmission while retaining a carburetor. They drive directly off of the primary throttle shaft for accurate voltage readings. Holley TPS kits come complete with all the parts needed for a safe and easy installation.
( 36 )
$199.95
Whether your engine has forced induction or is naturally aspirated, Holley MAP sensors will keep your engine performing at its best. They're available in 1, 2, 3, 3.5, 5, and 7-bar models, with a variety of psi ranges. Choose the style preferred for your application.
( 17 )
$112.95
—
$199.95
Holley Hall Effect crank trigger sensors are replacements for flying magnet crank trigger setups. These drop-in sensors are Hall Effect types--they output a square wave signal--ideal for use with most EFI systems. Replace your crank trigger sensor for your flying magnet setup with Holley Hall Effect crank trigger sensors. It does not detect a ferrous steel target.
( 4 )
$183.95
The long wire runs of an electric pump installation can sometimes result in a voltage drop at the pump. Holley fuel pump relay and harness kits offer good insurance that the fuel pump will be receiving full voltage from the battery. The kits can be used with any electric fuel pump, as long as the current load is not above 30 amps. They work with 12, 16 and 24 V systems and come equipped with 12 AWG that provides extra current-carrying capacity with minimal voltage loss. A 30 amp relay is included with a relay socket wired with extra-long leads specifically designed to reduce the number of splices required. Quality insulated crimp connectors are provided to make necessary splices where required and detailed installation instructions are also included.
( 8 )
$170.95
If your vehicle's main wiring harness doesn't have COP (coil-on-plug) trigger wires, you can simply upgrade to one of Holley's universal ignition harnesses. They're specially designed to install coil-on-plug or coil-near-plug coils on Holley EFI systems into Holley Smart Coil ignition sub-harnesses or GM LSx coil harnesses. These harnesses are ideal for use with Holley HP or Dominator ECUs, but are compatible with other EFI systems, as well. Extra pins are provided for both the metripak and ECU ends, if you decide to shorten the harnesses. Caution should be taken to ensure coil trigger wires are installed in their correct pin locations to prevent engine misfire. Make certain your EFI system fires right every time with Holley universal ignition harnesses.
Not Yet Reviewed
$187.95
Holly Sniper EFI coil driver modules are designed to be used in place of a capacitive discharge box. These coil drivers are utilized to amplify the energy transferred to your spark plug, promoting complete combustion in the cylinder! Features: * Compact size allows for easy installation without cluttering up your engine bay * Labeled wires take the stress out of your wiring installation * Requires use of a canister-style ignition coil
( 4 )
$164.95
The undisputed leader in fuel systems for over 100 years, including Holley crankshaft trigger sensors and pigtails. Their Performance products have powered every NASCAR Sprint Cup team and nearly every NHRA Pro-Stock champion for four decades. They're clearly experts in the field of engine parts, These sensors are fitted to detect the degree of crank rotation, so the engine can inject fuel and spark the coils at just the right time. Holley sensors are designed to trigger from a ferrous metal (magnetic steel) target, such as their own 60-2 crank wheels, and they can also be used as cam sensor triggers or for other applications.
( 6 )
$163.95
—
$187.95
Designed to extend your factory coil harness so you can easily remote-mount your ignition coils, these wire assemblies by Holley provide an ideal solution for cleaning up the look of your engine bay. They provide the means for mounting your ignition coils off the valve covers with their OEM connectors that provide a secure connection between your ECU and coils. Get the customization you want with the Holley ignition coil extension harnesses designed for your application.
( 1 )
$126.95
Holley J2A, J2B, J3, J4 connector and pin kits are designed for use with your Holley Dominator EFI system. These kits include four connectors and pins for the connectors.
Not Yet Reviewed
$219.95
Holley ECU mounting brackets allow you to comfortably install either the Dominator ECU, Holley HP, Terminator X, or Terminator X-MAX under your Mustang's front passenger seat. They're designed to work with stock seats and seat tracks (modified/race seats may or may not accommodate them). You simply route all your ECU harnesses through the firewall--properly route the wires, install the unit followed by the ECU, and then reconnect your wires and go! Use your laptop to fine-tune the ECU without popping the hood and protect it from engine bay heat with Holley ECU mounting brackets. Order the brackets recommended for your application.
( 3 )
$103.95
—
$110.95
Holley split wire looms direct from the Holley EFI Wiring Shop. These are high-quality TechFlex F6 black nylon braided split looms they utilize on their main harnesses. They are available in two lengths and a range of diameters from 1/8 in. to 2 in. to build or service your Holley EFI-powered machine.
( 31 )
$104.95
—
$137.95
Maintain optimum idle and rpm with Holley throttle position sensors. They are available for standard Holley carburetors and Holley's Pro-Jection. The sensors use quick-connect Weatherpack connectors, so installation is a snap.
( 14 )
$119.95
—
$163.95
Timing is everything. Holley EFI cam sync sensor kits provide the components to set your engine's power curve for optimum performance. The complete kits include a sensor, stainless steel flying magnet target with high-temperature rare earth magnet, connector, pins, seal, and washers. The kits are also available without the flying magnet target and washer; plus, the components are also available individually. Eliminate ignition timing variations and mis-adjustments with Holley cam sync sensor kits. Features include: * 3-wire Hall effect camshaft sensor generates digital square-wave signal * Can work with internal and external cam drive systems (i.e. gear, chain, and belt drive systems with or without timing cover) * Can operate from 8 to 20 V * M12x1 threads for finer gap adjustability; approximately 1.5 in. length
Not Yet Reviewed
$184.95
—
$262.95
On Sale
You already have the wire and Holley EFI ECU connector kits have the rest of what you need to rewire your EFI installation. Fully terminate your own custom main harness with Holly EFI ECU connector kits. Features include: * Pre-terminated J1A/J1B Tyco Superseal connectors * 20 to 22 gauge pre-terminated wires * 16 to 18 gauge pre-terminated wires * Cavity plugs
( 3 )
$112.95
—
$158.95
Holley EFI remote LS coil relocation brackets are available for all existing LS coil models, as well as for Holley EFI SmartCoils. These brackets are fabricated from lightweight aluminum and allows you to discreetly remote mount your LS engine coils at a location of your choice. Each Holley EFI bracket kit was custom designed, based on the specific coil model to ensure that the coils will mount as compactly as possible--size and shape between each kit will vary depending on the coil being used. Features include: * Eliminates OE coil-on-cover clutter * Designed to custom fit all LS ignition coil models * Fabricated from lightweight aluminum * Includes coil mounting hardware * Sold as a pair (coils not included) * Available in black or natural finish
( 4 )
$177.95
—
$237.95
Holley shielded cable conductor wires are great for wiring up EFI systems or for any wiring job requiring heavy-duty 20-gauge wire. Each cable is internally shielded for maximum noise rejection and come in a variety of different sizes.
( 3 )
$166.95
—
$249.95
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$149.95
—
$158.95
Holley products deliver the edge you need over the competition. Their Ford modular ignition coil harnesses offer true plug-and-play performance by using OE-style connectors to hook up to your factory coil packs, sensors, or control unit without any modifications. Among other functions, fully connected ECUs allow you to precisely regulate the fuel and ignition of your engine. These Holley complete harnesses enable applications with a single power adder to accommodate a greater number of controls. Order the model designed for your vehicle/engine.
( 1 )
$206.95
—
$249.95
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$121.95
—
$125.95
Holley Hemi V8 ignition coil adapter harnesses let you take charge of your engine by controlling both fuel and spark. They are built to fit and function with the factory harness. The harnesses feature TXL-grade copper wiring with minimal weight, plus high-temperature sleeves in a small diameter. Factory-style terminations provide a strong, secure connection.
( 1 )
$187.95
—
$199.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
