VOLKSWAGEN BEETLE Spark Plug Wire Sets Spark Plug Wires and Accessories Ignitions & Electrical - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 1998 )

$119.95

PerTronix Flame-Thrower 7mm Stock Look Spark Plug Wire Sets

PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility

4.13 out of 5 stars ( 141 )

$64.58

—

$67.90

Taylor ThunderVolt 8.2mm Spark Plug Wire Sets

ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available

4.65 out of 5 stars ( 661 )

$62.90

PerTronix Flame-Thrower Spark Plug Wire Sets

Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy

4.43 out of 5 stars ( 119 )

$64.60

—

$67.90

Standard Motor Spark Plug Wire Sets

Standard Motor spark plug wire sets will provide your ignition system with new life. They're high-quality, direct-fit OEM replacement wires that are tailor-made to restore efficiency and performance. These sets are manufactured to factory specifications and are pre-terminated, so they can be installed with no modifications. Order the spark plug wires designed for your vehicle application.

4.28 out of 5 stars ( 113 )

$14.99

—

$68.99

Summit Bucks

Denso Ignition Wire Sets

Denso ignition wire sets fit right, look right, and work perfectly. Their end caps are identical to OE and are designed to "click" into place for easy installation and a secure fit. An installer can feel and hear that a solid connection has been made, even in a difficult-to-see location. Through a patented process, the terminals are attached with an extremely strong connection ensuring the cable and boot will not separate during removal and installation. Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. Denso 7 and 8mm ignition wire sets are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40 to 428 degrees F and pass tests covering everything from electrical properties, to shrinkage, to chemical resistance, and accelerated life testing. Features and benefits of Denso Ignition Wire Sets include: * High-temperature silicone jacket to withstand heat, cold, chemicals, and moisture * Reinforcing member for added strength and terminal retention * Silicone insulation for superior dielectric and heat performance * Conductive silicon layer on 7 and 8mm wires for high-temperature performance and EMI/RFI noise suppression * Fiberglass braid for maximum strength on 7 and 8mm wires * Carbon-impregnated fiberglass core for superior conductivity on 7 and 8mm wires * Core reinforced with KEVLAR® on smaller diameter wires * Conductive layer impregnated with Ferrite on smaller diameter wires * Wire-wound layer on smaller diameter wires to suppress EMI/RFI noise * Superior dielectric and thermal qualities * Factory-original fit, appearance, and performance * World-class chemical and oil resistance

3.9 out of 5 stars ( 10 )

$29.99

—

$53.99

On Sale

ACCEL SuperStock 5000 Series Spark Plug Wire Sets

ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.

4.33 out of 5 stars ( 48 )

$76.19

$42.94

Taylor High Energy Spark Plug Wire Sets

Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.

4.36 out of 5 stars ( 226 )

$41.25

Taylor Spiro-Pro Spark Plug Wire Sets

Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.

4.63 out of 5 stars ( 667 )

$60.75

Taylor Street Thunder Spark Plug Wire Sets

Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.

4.58 out of 5 stars ( 445 )

$41.25