Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
LAND ROVER Sensors
Showing In Stock Items. Show All 93 Items.
NTK Oxygen Sensors
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 85 )
$76.99
Bosch Premium Universal Type Oxygen Sensors
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$63.99
JMS Chip PedalMAX Drive-by-Wire Boosters
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 56 )
$289.75
Standard Motor Fuel Pressure Sensors
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$115.99
Standard Motor Mass Airflow Sensors
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$111.99
—
$152.99
Instant Rebate
PowerStop Electronic Brake Wear Sensors
PowerStop has a reputation for precision and adherence to the strictest OEM standards. Extending those standards, PowerStop's electronic brake wear sensors are designed to meet the same form, fit, and function as the original OEM part. Brake wear sensors wear down with the pads and illuminate the brake pad wear indicator light/warning. When that happens, it's time to replace the brake pads as well as the sensors. PowerStop electronic brake wear sensors are designed to withstand high-temperatures, assure excellent electrode conductivity, and they will continue to work after thousands of miles, providing the safety and performance drivers count on.
( 5 )
$12.87
—
$32.41
Summit Bucks
Clearance
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$303.99
$59.99
—
$290.99
Arnott Ride Height Sensors
Ride height sensors determine vehicle height. They can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. Arnott aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle's chassis. The ECU is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Arnott ride height sensors are manufactured with quality components, lab tested up to 1 million cycles, and offer plug-and-play installation to restore your vehicle's ability to respond to road conditions, ensuring comfort and capability for a premium ride. Available for numerous applications, select the sensor designed for your vehicle.
Not Yet Reviewed
$84.63
—
$93.78
Beck/Arnley Replacement Knock Sensors
Knock, knock... who's there? If it's your engine talking, you'd better listen! Beck/Arnley knock sensors are quality-made replacement parts that fit just like the originals. If you hear an unusual pinging in your car, especially at high speeds, then you may need to replace your knock sensor. Engine knock isn't a joke! Protect your engine and its components with replacement knock sensors from Beck/Arnley.
( 1 )
$45.99
JMS Chip PedalMAX Terrain Drive by Wire Boosters
JMS Chip PedalMAX Terrain drive-by-wire boosters are very similar to the standard PedalMAX series but have two added features: They have the ability to reduce or increase the throttle sensitivity (reduction feature works great for inexperienced drivers or for poor traction conditions); and they can save your knob setting--just unplug the knob and it's saved! Now you can match your throttle response to your exact terrain with JMS Chip PedalMAX Terrain drive-by-wire boosters. Order the model recommended for your vehicle.
( 1 )
$309.75
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$209.99
Holstein Parts Camshaft Sensors
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 3 )
$17.99
—
$170.99
Delphi Engine Coolant Temperature Sensors
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$11.99
—
$12.99
Holstein Parts ABS Sensors
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$24.99
—
$611.99
Holstein Parts Crankshaft Sensors
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 2 )
$16.99
—
$95.99
Holstein Parts Throttle Position Sensors
The throttle position sensor (TPS) is used to monitor how far the throttle valve (or blade) is open, which is determined by how far down the accelerator pedal has been pressed. This information is relayed to the vehicle's engine control unit (ECU) and determines how much air and fuel is entering the engine, which guarantees a smooth-running engine. When a TPS goes bad, the car's throttle body won't function properly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts throttle position sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$21.99
Brembo Brake Pad Wear Sensors
Brembo offers brake pad wear sensors for a wide range of vehicles—including many BMW, Audi, Porsche, Volkswagen, Mercedes-Benz, Mini Cooper, Jaguar, and Land Rover models. These stock replacements are made from original materials and designed to factory specs to ensure proper fitment and performance. Order the sensors recommended for your application.
( 1 )
$14.30
—
$24.11
EBC Disc Brake Pad Electronic Wear Sensors
Keep your vehicle safe with EBC disc brake pad electronic wear sensors. These units help keep you aware of how much material is left on your brake pads and indicate when you need to replace them. The EBC sensors are available for a variety of submodels from BMW and Audi, in particular.
Not Yet Reviewed
$2.48
—
$13.88
Holstein Parts Coolant Temperature Sensors
The coolant temperature sensor, also known as the coolant temperature switch, is an engine management system sensor used to monitor the engine coolant's temperature. Because temperature play a vital role in engine performance, a problem with your coolant sensor could quickly translate into engine issues. Holstein Parts coolant temperature sensors contain only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. And they offer superior coverage for domestic and import applications.
Not Yet Reviewed
$6.99
—
$10.99
Holstein Parts MAP Sensors
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
( 1 )
$49.99
Dorman Ride Height Sensors
Dorman ride height sensors are designed to replace damaged, faulty, or missing ride height sensors. They give input to your suspension systems, changing the way they react to various road conditions or loads. They're positioned behind the tire to deliver ride control and suspension leveling. Get a smoother ride with these easy-to-install OE parts--avoiding the wear and tear of the most difficult road conditions.
( 2 )
$58.99
—
$89.99
Clearance
Holstein Parts Vehicle Speed Sensors
Vehicle speed sensors measure wheel speeds and provide this information to the vehicles ECU (Electronic Control Unit). The ECU then calculates ignition timing, transmission shift points, and air/fuel ratios for the vehicle. Data from the Vehicle Speed Sensor is also used in cruise control systems to maintain a constant speed. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts vehicle speed sensors line has superior coverage for domestic and import applications.
( 4 )
$14.99
$8.50
—
$41.99
Bosch MAP Sensors
Bosch Manifold Absolute Pressure (MAP) sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance. Each model features an extremely sturdy design with special coatings for resistance of harmful chemicals inside the intake manifold. Bosch continually improves their MAP sensor designs with the latest chip technology, and they're engineered to meet or exceed your vehicle's original equipment specifications (performance, drivability, economy, and emissions). Dozens of styles are available for specific vehicle and engine applications. Don't let your engine's performance suffer—replace your faulty MAP sensor with the reliability of Bosch.
( 1 )
$33.99
Standard Motor MAP Sensors
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$66.99
—
$181.99
