Availability
Showing In Stock Items. Show All 103 Items.
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 81 )
$50.99
—
$51.99
On Sale
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
$97.19
Mopar Replacement oxygen sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement oxygen sensors. Order the model designed for your specific vehicle application.
( 1 )
$69.99
—
$81.99
Summit Bucks
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 8 )
$73.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$50.99
—
$60.99
Mopar Replacement camshaft position sensors are affordable, reliable, and built to last. They're also a smart choice to keep your Chrysler, Dodge, Plymouth, Ram, or Jeep running smooth and efficiently. These genuine OE replacements provide the proper function, as well as the right fit to make your install hassle-free. Order the model designed for your specific vehicle application.
( 3 )
$61.99
Mopar Replacement air temperature sensors are genuine OE replacements designed to monitor the temperature of the air entering the engine—so that the proper air/fuel mixture can be maintained. These sensors are engineered from high-quality materials to provide you with reliable, long service with the right fit, function for your vehicle application to repair and/or restore performance and safety, just as it should be. For genuine OE replacement parts for your Mopar, choose Mopar Replacement.
( 5 )
$85.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$59.99
—
$76.99
Mopar Replacement MAP sensors are genuine OE replacements. That means your Chrysler, Dodge, Plymouth, Ram, Jeep, or Mitsubishi will receive the perfect part to repair and/or restore performance and safety, just as it should be. The manifold absolute pressure sensors are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Maintain accurate readings and smooth engine performance by choosing the Mopar MAP sensor designed for your vehicle application.
( 1 )
$98.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$69.95
On Sale
Crown Automotive crankshaft position sensors are used to control ignition timing and the fuel injector. They're crafted to compile information about the working condition and speed of the crankshaft, ensuring your engine cylinders are always performing as needed. This enables you to set ignition timing precisely to improve the performance of the engine cylinders. Crown crankshaft position sensors are available for fitment on a wide range of vehicles.
( 8 )
$55.99
—
$59.99
$50.39
—
$53.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
—
$62.99
Does some custom exhaust work require you to relocate your oxygen sensors? Then Kooks Headers oxygen sensor harnesses are just for you. They're available in several different lengths and for various applications. These harnesses are also assembled from high-quality components to meet or exceed OEM specifications. For an easy, hassle-free installation on your next exhaust project, choose Kooks oxygen sensor harnesses.
( 8 )
$94.50
OMIX-ADA crankshaft position sensors are direct-fit replacements for the best fit and function. Crankshaft rotational speed and engine rpm are important factors in ignition timing control. Don't let worn-out sensors hamper your vehicle's performance. Replace them with OMIX-ADA crankshaft position sensors.
Not Yet Reviewed
$57.99
—
$109.99
The accelerator pedal sensor measures the position of the pedal and transmits this data to the control unit for setting the throttle elements or to the injection system. The advantage of this approach is that these parameters can be used to prevent wear on the clutch and drivetrain and to reduce CO2 emissions. Hella accelerator pedal sensors maintain safe, smooth operation for your vehicle, and they are high-quality replacements with availability for many European manufacturers. Available for automatic and manual transmissions; choose the pedal sensor needed for your vehicle.
Not Yet Reviewed
$109.99
—
$113.99
Spicer Drivetrain ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of your ABS system, and pulses at low-speed can be frustrating and dangerous. Spicer tone rings will maintain your vehicle's sensor readings and allow your ABS system to function at its peak.
( 1 )
$52.99
On Sale
Crown Automotive camshaft position sensors provide information vital to your engine's function. They offer a selection of reliable sensors to send off accurate data to your vehicle's ECM, for proper ignition timing and a smoother-running engine. Timing is important for efficient performance. Replace bad sensors with Crown camshaft position sensors.
( 2 )
$57.99
$52.19
On Sale
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$55.99
$50.39
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$54.99
—
$75.99
On Sale
Clearance
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$82.99
—
$95.99
$74.69
—
$86.39
These Dorman throttle position sensors are made of high-quality materials and enable you to monitor the position of your throttle. They replace your factory throttle body position sensor. Dorman has the best quality OEM replacement throttle body position sensors you'll find on the market.
( 3 )
$65.99
On Sale
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$55.99
—
$116.99
$50.39
—
$105.29
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$99.99
Clearance
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$124.99
$59.99
—
$90.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
