Availability
Showing In Stock Items. Show All 69 Items.
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 149 )
$289.95
$125.95
—
$228.95
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 164 )
$188.99
—
$189.99
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$162.40
—
$212.15
Dragon Fire offers Performance ignition coils for a wide range of cars and trucks—including Chevrolet, GMC, Buick, Cadillac, Hummer, Isuzu, Pontiac, and Saab models from the early 2000s and up. These replacements are engineered to provide reliable spark energy and complete combustion. Their watertight, weatherproof connectors are designed using advance thermoresistant plastic to resist fracture and cracking from radiant heat and thermal cycling. The coils are tested to meet or exceed OE output voltage. High-temp epoxy filled construction prevents voltage leaks and RFI interference. Each unit also includes performance-grade primary and secondary bobbins with premium copper windings to ensure peak performance under load and extended service life. Order the coil packs recommended for your vehicle. FEATURES AND SPECS: * Direct OEM replacement * High-energy output * High-RPM Rated for NA or boosted applications * Brass high-tension terminals * Manufactured in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure long service life and perfect fitment
( 16 )
$229.95
—
$249.95
If you have a computer-controlled engine, Davis Unified Ignition GM computer-controlled distributors are the replacements that you need. They are built with all-new parts to ensure durability and performance. GM computer-controlled D.U.I. distributors feature brass terminal caps and rotors for maximum conductivity, nylon rotor hold-down screws to prevent high-rpm misfires, and oil-impregnated brass bushings for long-lasting life. These one-piece versions utilize a Dyna-Module and a high performance coil for excellent spark and firepower. GM computer-controlled D.U.I. distributors are also shimmed for proper endplay clearance to ensure maximum magnetic pick-up coil inductance. These units are easy to install, plugging directly into your factory wiring, and are polished for a high-tech appearance. Replace your existing distributor with one of these GM computer-controlled distributors from Performance Distributors. You'll be happy that you did.
( 50 )
$239.00
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 35 )
$122.95
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$183.81
Our Summit Racing™ computer-controlled billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance.
( 93 )
$219.99
ACDelco coil and ignition wiring harnesses will spark renewed energy for your engine. Wiring harnesses can deteriorate over time, leaving them unable to deliver the necessary voltage for power. Replace worn wiring with ACDelco coil and ignition wiring harnesses and keep the spark alive!
( 20 )
$106.99
Replace your tired stock distributor with a brand new Summit Racing™ Vortec distributor and you'll get more power than you ever expected out of your ignition at a price that can't be beat. The distributors have heavy-duty features like a balanced rotor, aligned bronze oilite bushings for extended street use, and a cast aluminum housing that's machine-finished. They have a magnetic trigger for a consistent, powerful spark and a blue cap with brass terminals for excellent spark transfer. Each distributor is dynamically tested, so you can trust that you're getting a high-quality distributor.
( 162 )
$180.99
—
$214.99
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$167.77
—
$201.47
Davis Unified Ignition street/strip coil kits are capable of 7,000 rpm! The higher voltage output of these coil kits allows you to widen your spark plug gap up to .055 in. The wider plug gaps allow major spark energy into the combustion chamber for a better burn of the fuel mixture and increased horsepower. Due to the high-voltage output of the coils, a burn-through resistant brass terminal rotor is included, as well as nylon rotor screws to prevent misfires at extreme rpm. D.U.I. race coils are installed in your choice of colors, including a cool clear style so you can watch the sparks fly.
( 99 )
$105.99
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$149.69
—
$155.00
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$104.99
—
$119.99
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$100.99
—
$164.99
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$100.52
Give some more spark to your ignition system using these Professional Products LSX high performance coil packs. They provide a maximum voltage of 40 kV and the longest spark duration available. The coil packs fire 1/8th as many times as the old single coil systems, providing eight times as long for the coil to regenerate power for the next spark. On multiple coil setups like these LSX high performance packs, longer spark duration is highly desirable to ensure that 100 percent of the intake charge is ignited—for maximum power throughout the entire rpm range.
( 19 )
$176.99
—
$199.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$240.99
—
$244.99
FAST XDi Street HEI distributors include the industry-first gear technology with an upgraded module and coil that ensure clean ignition firing up to 8,500+ rpm. Ideal for SB and BB Chevy engines, each of the XDi distributors feature a plasma nitrided gear compatible with all popular camshaft materials, including cast iron, austempered iron, 5160 steel, and even 8620 steel. The special plasma nitride process used on the gears not only increases the gear's surface hardness, but also the "slickness" of the gear teeth reducing friction and increasing cam/distributor gear life, as well as making them superior to common melonized gears. XDi Street HEI distributors also feature powerful 6-amp ignition modules that drive custom-wound performance coils up to 50,000 V, providing the hot spark needed for maximum horsepower. While ready to run out of the box, for those that enjoy tuning the mechanical and vacuum advance mechanisms for better throttle response and fuel economy, FAST XDi Street HEI distributors include springs, advanced limit plate, and instructions needed to adjust the distributor for your particular engine/vehicle combination.
( 21 )
$191.95
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$114.70
—
$142.60
Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee
( 24 )
$169.99
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 511 )
$126.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
