Availability
Showing In Stock Items. Show All 25 Items.
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$50.99
—
$92.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
—
$63.99
Beck/Arnley air charge temperature sensors offer you the peace of mind of knowing that you have high-quality, direct fit OE replacements. That means that you can install them easily and you're ready to go, knowing that they will perform just as expected. They are made from premium materials that include corrosion resistant terminals and coatings to ensure a long life. Is your car idling rough or stalling at red lights? Maybe you need a new air temperature sensor, and Beck/Arnley is the brand that gets it right. The right temperature for the right mix of air and fuel with their engine management parts made right.
Not Yet Reviewed
$52.99
Has your vehicle ever mysteriously died on you, only to start up fine after emergency road service showed up--and then it happens again? Could be caused by malfunctioning crankshaft position sensors. Beck/Arnley sensors help to control many functions on your car, from ignition timing to power output to fuel efficiency, by relating crucial data to your vehicle's ECU. If your crankshaft position sensors become burnt or worn out, solve the "mystery" with new sensors from Beck/Arnley, for a life made easier by parts made right.
( 3 )
$51.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 140 )
$64.99
Granatelli spark plug wires utilize an exclusive solid stainless connector cable with stainless snap-lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near 0 ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures of up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. The assembled wires are engineered to exceed OEM specifications and to be OBD-II computer safe. Order the set designed for your vehicle application.
( 56 )
$81.30
Denso ignition wire sets fit right, look right, and work perfectly. Their end caps are identical to OE and are designed to "click" into place for easy installation and a secure fit. An installer can feel and hear that a solid connection has been made, even in a difficult-to-see location. Through a patented process, the terminals are attached with an extremely strong connection ensuring the cable and boot will not separate during removal and installation. Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. Denso 7 and 8mm ignition wire sets are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40 to 428 degrees F and pass tests covering everything from electrical properties, to shrinkage, to chemical resistance, and accelerated life testing. Features and benefits of Denso Ignition Wire Sets include: * High-temperature silicone jacket to withstand heat, cold, chemicals, and moisture * Reinforcing member for added strength and terminal retention * Silicone insulation for superior dielectric and heat performance * Conductive silicon layer on 7 and 8mm wires for high-temperature performance and EMI/RFI noise suppression * Fiberglass braid for maximum strength on 7 and 8mm wires * Carbon-impregnated fiberglass core for superior conductivity on 7 and 8mm wires * Core reinforced with KEVLAR® on smaller diameter wires * Conductive layer impregnated with Ferrite on smaller diameter wires * Wire-wound layer on smaller diameter wires to suppress EMI/RFI noise * Superior dielectric and thermal qualities * Factory-original fit, appearance, and performance * World-class chemical and oil resistance
( 10 )
$57.99
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 79 )
$52.99
—
$83.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$56.99
—
$82.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
