Availability
Showing In Stock Items. Show All 29 Items.
Unlock the hidden potential in your Mopar with Z Automotive Tazer programmers. These programmers plug into your OBD II port and allow you to enable features that exist in your vehicle from higher trim levels or packages disabled by the factory. Unlock features that will allow a backup camera, factory fog lights, daytime running lights, line lock functions, Light Show mode, and more. Specific features of Z Automotive Tazer programmers include: * Enable factory sport mode for 5-speed vehicles with 8.4 in. and 4.3 in. Uconnect screens (2012-14 Charger/300) * Enable factory sport mode for 8-speed vehicles (2012-17 Charger/300, 2015-17 Challenger) * Enable SRT performance pages on 8.4 in. Uconnect screen (2012-14 Charger/300) * Enable SRT performance timers in EVIC display (2012-18 Charger/300/Challenger) * Enable drive modes—street/sport/track/valet/custom/ECO (2015-18 Scat Pack Charger/Challenger) * Enable support of added factory paddle shifter (2012-18) * Force RWD mode for AWD cars/trucks (2012-17 Charger, 2014-17 Jeep GC SRT, 2014-17 Durango with electronic transfer case) * Manually shift gears using steering wheel cruise plus/minus buttons (2012-14, 5-speed only)
( 12 )
$249.00
On Sale
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 97 )
$284.96
$256.46
On Sale
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 109 )
$292.46
$263.21
Edge EAS power switch kits are a tremendous new feature for truck owners. Customers can now hook up accessories like aftermarket lights, air compressors, etc., and engage them from their CTS/CTS2 device. Install the new switch and either use the Edge MyStyle software to name your accessory—or with the CTS2 to rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to six gauges and four rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off.
( 2 )
$159.95
Digipower USA SPEED Infinity throttle response controllers feature the ability to use an app capable of processing and modifying the signals going from the throttle pedal to the ECU. The purpose is to achieve an enhanced and safer driving experience, while also improving the response of the engine, limiting the acceleration, and locking the pedal in the anti-theft mode, among other settings. These versatile products will adapt to every customer's desired setup. When you want endless possibilities from a single product, order the Digipower USA SPEED Infinity throttle response controller designed for your specific application. More product features include: * Up to three times faster response * 100-percent plug-and-play with installation in less than five minutes * More than 100 sensitivity adjustments * 6 driving modes, including track and valet * Anti-theft mode * Will not leave residual codes on factory PCM * Return to stock settings at anytime
Not Yet Reviewed
$216.00
Your vehicles computer is designed to track the speed based on your stock tire height. When upgrading to larger tires, there will be a discrepancy between your actual speed and the readout on your speedometer. Rough Country speedometer calibration devices are easy to use to help you quickly reprogram your vehicles speedometer to match the output of your larger tires. These plug-and-play devices connect directly to your vehicle's diagnostic link connector port and in just a few short minutes your speedometer reads true again. Plus, they not only change your in-dash readout, but they also update your vehicles ECM, ensuring accurate shift points and proper electronic stability control. Finally, you can get an affordable and accurate speedometer calibration with an easy and intuitive setup process, thanks to Rough Country. Choose the device designed for your vehicle.
Not Yet Reviewed
$179.95
Edge EAS Shift-On-The-Fly (SOTF) kits permit you to change power levels with the touch of a button utilizing your existing Insight CS2 or CTS2. Other tuning companies utilize a voltage signal to prompt a custom tune level change, the Edge EAS SOTF accessory kits allow your Insight monitor to produce voltage signals between 1 to 5 V, just like a regular switch does, allowing for tune changes—but without the need for a separate switch! Here's how the EAS SOTF kits work: * The EAS shift-on-the-fly accessory, when connected to your insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels * Switching occurs by changing the voltages between 1 V, 2 V, 3 V, 4 V, 5 V (most custom-tuned vehicles run within these parameters) * Wire or plug the switch in, just as you would your normal Shift-On-The-Fly or Driver Selectable Tuning (DST) switch, then flash the tune into your vehicle that enables the SOTF/DST functions * Enjoy changing your power levels right through Insight CS2 or CTS2 screen (CS2 and CTS2 monitors sold separately)
Not Yet Reviewed
$274.95
Vehicles today are built with an abundance of control modules (computers), all working to maintain the essential, as well as standard features you enjoy, need, and have become dependent upon. Mopar Replacement offers a huge selection of modules to keep you safe and happy. Their heat seat control modules will make sure you always have a warm comfy seat when the temperatures outside start dropping. Each one is designed and engineered to provide the correct fit and function, matching that of the original they are replacing. The smart option to restore the optimal performance of your Mopar is with Mopar Replacement modules.
Not Yet Reviewed
$209.99
Dorman engine and powertrain control modules are designed to process inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Quality-built, each of these Dorman remanufactured engine control modules is tested to meet original equipment performance—and are less than the cost of a new ECM from the dealer!
Not Yet Reviewed
$241.99
Clearance
Cardone remanufactured engine control units are 100 percent computer tested to ensure full functionality. Re-solder of critical components ensures superior electrical connections, no intermittent failures, and longer product life. These engine control units receive 100 percent replacement of critical rubber wear components for longer life. On-car vehicle validation routines ensure that modules meet all form, fit, durability, and performance requirements.
( 1 )
$170.99
—
$223.99
$144.50
—
$189.50
Cardone Remanufactured ABS control modules are designed to meet or exceed OE performance. Reverse engineering provides insight into how and why the unit originally failed, allowing their engineers to identify and correct factory design flaws. Every Cardone Remanufactured unit goes through stringent testing, ensuring like-new performance and quick reaction time when traction control is required. Over 50 models are available; order the anti-lock braking system control module recommended for your vehicle.
( 2 )
$211.99
—
$306.99
On Sale
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
$269.96
Dorman's remanufactured powertrain control modules offer original equipment performance for less than the cost of a new ECM from the dealer. The engine control module processes inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Each ECM is quality-remanufactured and has been fully tested to ensure durability and functionality, including hot and cold chamber testing to meet original equipment performance. Order the module for your application.
( 4 )
$186.99
—
$253.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
