Availability
Showing In Stock Items. Show All 45 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$70.98
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 378 )
$31.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 623 )
$78.55
$70.65
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 371 )
$41.99
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$91.95
On Sale
ACCEL Mopar Remote Super Coil and harness combos provide increased performance for Dodge trucks and Jeeps that utilize the light gray Yazaki coil connector. You get quicker starts, improved idle, crisp throttle response, and higher top-end power. These coil and harness combos are compatible with Mopar J-TEC computer-controlled ignitions, and require no modifications for installation.
( 31 )
$117.37
$88.03
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
—
$249.95
$178.95
—
$224.95
On Sale
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$15.23
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$223.85
On Sale
ACCEL distributor caps are the best way to help improve ignition. The compression-molded caps are stress-relieved immediately after molding to ensure stability of the 60,000 V alkyd high-performance compound. Brass inserts provide for high spark energy flow. These heavy-duty ACCEL distributor caps provide maximum energy to your engine. They're available in a variety of styles for a wide range of vehicle application.
( 49 )
$32.87
On Sale
ACCEL ignition coil adapter harnesses will allow you to connect the coil to the factory wiring harness. The ACCEL ignition coil adapter harnesses include the necessary connectors for a quick and easy installation.
( 43 )
$38.52
$28.89
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 203 )
$81.99
—
$93.99
Clearance
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 57 )
$39.99
Summit Racing™ ignition coil wiring harnesses can facilitate a hassle-free connection of the coil to the wiring harness. That means no more cutting or splicing wires! These adapter harnesses are made from quality material for lasting durability—and they include all the necessary connectors to provide a fast, effortless installation. Order the model recommended for your application.
( 12 )
$23.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 113 )
$10.97
On Sale
ACCEL distributor rotors are the perfect replacements for stock rotors to help ignition systems fire reliably. ACCEL distributor rotors feature high conductivity, corrosion-resistant brass terminals, and stainless steel rotor springs for unrestricted spark energy flow. Pick up a new ACCEL distributor rotor and make your distributor happy.
( 20 )
$19.70
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$79.99
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 82 )
$28.99
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$499.95
—
$579.95
$318.95
—
$448.95
Mopar Replacement distributor rotors are genuine OE replacements offering the right fit, function, and peace of mind. The rotors work in conjunction with other ignition components to keep your Chrysler, Dodge, or Jeep firing properly and staring every time. Keep the energy flowing by making the best choices to service your vehicle--Mopar Replacement distributor rotors.
( 4 )
$30.99
Mopar Replacement distributor caps are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured for quality materials, they offer the perfect choice to repair and maintain your Mopar ride with renewed energy to spark performance.
( 2 )
$30.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor caps use glass-filled polyester resin or high-grade polyester and aluminum inserts to match OE performance. Available in a wide range of applications, choose the value and quality of Standard's T-Series distributor caps to service your vehicle.
( 7 )
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
