Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET Computers, Chips & Programmers
Showing In Stock Items. Show All 10 Items.
On Sale
Holley Terminator X MAX Engine Management Systems
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 92 )
$1,849.95
—
$2,559.95
$1,663.95
—
$2,302.95
On Sale
Holley Terminator X Engine Management Systems
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 96 )
$1,399.95
—
$1,499.95
$1,258.95
—
$1,348.95
On Sale
Holley Dominator EFI Vehicle Management Systems
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,149.95
—
$3,499.95
$2,833.95
—
$3,148.95
On Sale
Holley Terminator X MAX GM 6L80/90 Transmission Kits
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$587.95
$528.95
On Sale
Holley HP EFI ECU and Harness Kits
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$2,719.95
$2,446.95
On Sale
Holley Terminator LS Plug-and-Play Multi-Port Systems
Take control of your engine a Holley Terminator LS plug-and-play multi-port engine management system. They include all the necessary parts to control the fuel, spark, 4L60/4L80E or 4L60E/4L80E transmission, the vehicle's drive-by-wire, or some combination of those (depending on the application) on your stock or mild LS. Order the model recommended for your year/make and engine application. Holley Terminator LS plug-and-play multi-port systems include: * Terminator EFI ECU * Terminator hand-held controller with 3.5 in. full-color touch screen * Main power harness * Main engine harness * Injector harness * Other harnesses as required by the application * Oxygen sensor with fitting
( 1 )
$2,819.95
—
$4,449.95
$2,536.95
—
$4,003.95
On Sale
aFe Scorcher HD Modules
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$451.00
—
$462.00
$405.90
—
$415.80
On Sale
aFe Scorcher Blue Modules
aFe Scorcher Blue modules increase fuel pressure, turbo boost, and overall vehicle performance—producing double-digit power gains. Designed with factory-style connectors, they easily connect to engine sensors for a quick and simple installation. The LED control switch can be routed through the firewall into the cabin for a hard-wired solution, or you can connect wirelessly to the module via Bluetooth with the smartphone app. It's a free app in the Apple and Google Play stores, and allows your smartphone to become a hand-held remote. The aFe Scorcher Blue module has four power settings: Stock (green), Sport (yellow), Sport+ (orange), and Race (red). This is the fastest way to safely gain significant horsepower. Order the model designed for your specific vehicle.
( 1 )
$581.00
$522.90
