Availability
Showing In Stock Items. Show All 62 Items.
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
—
$96.00
$71.60
—
$82.12
Looking to get a faster start, quicker acceleration, and better high-rpm performance from your HEI distributor? You can have it all with Summit Racing™ HEI coils. They deliver increased spark energy--48,000 volts' worth--to give you quicker starts and better acceleration. And special low inductance, high-temperature coil windings charge the coil faster so you'll get increased spark energy at high rpms, too.
( 24 )
$31.99
On Sale
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 41 )
$100.95
—
$123.95
$75.95
—
$92.96
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$84.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$78.55
—
$83.65
Chevrolet Performance distributor hold-downs clamp your distributor securely in place. This prevents rotation and helps to keep timing locked in place. For the best fit and function, choose genuine Chevy Performance distributor hold-downs as replacements in your GM vehicle.
( 2 )
$6.99
Summit Bucks
ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.
( 4 )
$79.99
—
$97.99
Designed for high-revving engines that perform up to 7,000 rpm, Davis Unified Ignition street/strip coils are built for extreme firing conditions. They are capable of 50,000 V of fuel igniting electricity. The higher voltage output allows spark plug gaps to be opened up to 0.055 in. The wider plug gap provides a more complete burn of the fuel mixture, allowing for more power and better fuel economy. Get your car up to speed and eliminate high-rpm misfires with these Davis Unified Ignition street/strip coils.
( 16 )
$75.00
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$27.99
—
$51.99
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 641 )
$71.75
—
$92.25
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 26 )
$47.99
—
$60.99
ZZPerformance offers high-voltage coil packs for a wide range of vehicles—including many Chevrolet, Cadillac, Pontiac, Buick, and Oldsmobile models from the early 1990s and up. The coil packs are available in different styles for various applications. Here are further details: * Model HVCP-14T: Upgrade your Volt/ELR ignition coil for improved performance and economy! The GM Voltec platform was designed around it's battery/hybrid system, but the internal combustion system was a budget solution—and the factory coil does not maximize the performance and efficiency of your engine. ZZP's high-voltage coil pack has improved core material, tighter coil winding, and higher voltage. No ECU calibration needed. * Model HVCP-38V2: These high-voltage coil packs will supply a stronger spark, which allows you to run a larger gap that will improve fuel economy, drivability, and HP capability. Not an earth-shattering difference but a small gain. Definitely well worth the upgrade if you're replacing your coils. --- Torque spec: 25 inch pounds --- No returns on electrical items. --- Sold in a set of 3. --- These fit GM 3800 W-Body and H-Body cars, including L67, L36, L32, and L26 * Model HVCPLSSQ8: After the resounding success of ZZP's round-style LSx ignition coils, ZZP now offers this square style. These coils produce on average 15 percent more spark—and have dyno-tested "before and after" results netting 4 to 5 whp gains on a naturally aspirated LS vehicle. Turbocharged and supercharged vehicles have netted 10+ whp gains and 15+ percent more spark than stock. Very impressive numbers for coils, better than OEM! This set of 8 coils will fit in place of the stock coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy ignition. The increased spark energy and voltage help improve the combustion process of the fuel mixture to create a more efficient burn. This results in improved throttle response, smooth idle, and quick starts, plus increased high-RPM performance! The coil packs also work fine for totally factory/stock vehicles. Fits 4.8, 5.3, 6.0, 6.2 and 7.0L. (Note: There are many variations of LS coils even within the same make and model year, so please check your vehicle to see if you have the square style. These replacements will not fit vehicles with the round style coil. The connectors and the way they mount are different, so you have to verify they look like the ones pictured.)
( 6 )
$109.99
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
$65.08
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 514 )
$52.69
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$77.15
Got a GM HEI ignition that's feeling kind of weak-kneed lately? Proform's epoxy-filled GM HEI ignition coils could be the answer to your problem. They replace the stock distributor-mounted HEI coil and crank out a hefty 50,000 V of plug-firing power. That's 15,000 V higher than the OE coil, which results in more completely burned fuel and better all-around performance.
( 3 )
$40.99
Designed for high-revving engines that perform over 7,000 rpm, these Davis Unified Ignition race coils are built for extreme firing conditions. They are capable of 10,000 rpm, nearly twice the output of stock HEI coils. The higher voltage output allows spark plug gaps to be opened up to 0.055 in. The wider plug gap provides a more complete burn of the fuel mixture, allowing for more power and better fuel economy. Get your race car up to speed and eliminate high-rpm misfires with these Davis Unified Ignition race coils.
Not Yet Reviewed
$85.00
With Delphi's knowledge of OEM protocol, their ignition control modules are engineered using superior materials to improve your vehicle's performance with the benefits of greater throttle response, smoother idle, and full power output at high rpm. Delphi ignition control modules are quality, direct fit OEM replacements available for a range of applications. For improved ignition performance, spark it up with Delphi!
( 15 )
$46.99
—
$192.99
Summit Bucks
ACDelco Gold ignition coils are high-quality replacements for many vehicles on the road today. They increase electrical system voltage to help ignite the air/fuel mixture, as the starting and charging system starts the engine. The coils also maintain the battery's charge and provide power to the electrical accessories while the engine is running. With ACDelco Gold ignition coils, you can rest assured that your vehicle is receiving premium parts engineered for long-lasting performance, durability, and dependability. Order the model recommended for your application.
( 2 )
$41.99
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 202 )
$100.99
Eliminate the distributor advance on an HEI distributor with these lockout plates from Davis Unified Ignition. They are easy to install and the vacuum advance eliminators use the same mounting screws that secure the vacuum advance. These eliminators are recommended for racing applications only.
( 19 )
$28.99
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
